ATI Graphics

[artur-pt]

hi

what are u doing ?

the agpm is load

91 0 0xffffff7f8143d000 0x10000 0x10000 com.apple.driver.AGPM (100.12.69) <77 73 69 10 5 4 3>

only thing i tell u to try is

use imac11,3

in smbios.plist file

use chameleon wizard to generate smbios file

good hack

[desi-g]

my Raw data

00,FF,FF,FF,FF,FF,FF,00,36,7F,25,00,00,00,00,00,04,13,01,03,80,22,13,78,F2,CE,50,A3,57,4C,99,26,

0F,50,54,00,00,00,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,1A,36,80,9A,70,38,22,40,19,33,

5B,00,54,BE,10,00,00,00,1A,36,80,C4,71,38,58,40,4B,96,ED,00,54,BE,10,00,00,00,00,00,00,00,00,00,

00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,0A

done everything  i am stuck at this raw data part 

where do i copy paste this raw data ,which line  do i need to convert this raw data into something else than copy paste it 

thanks 

[artur-pt]

hi

have u read this

http://www.insanelymac.com/forum/index.php?showtopic=208410

After obtaining this information you should keep a file with the extension *. txt, then proceed on Mac OS X to edit another file system located in

/ System/Library/Displays/Overrides/DisplayVendorID-756e6b6e/DisplayProductID-717

to do this make a copy of it to the desk, and changed its name to DisplayProductID-717.plist, introducing the Raw Data obtained by the method described above, an example of the original file and the file already containing the Forced EDID Raw Data

first u must know what file is loaded for u display, mine is that..

then look for the picture and u will see

where u gonna insert u raw data

good hack

[Phantomhive]

hi

what are u doing ?

the agpm is load

91 0 0xffffff7f8143d000 0x10000 0x10000 com.apple.driver.AGPM (100.12.69) <77 73 69 10 5 4 3>

only thing i tell u to try is

use imac11,3

in smbios.plist file

use chameleon wizard to generate smbios file

good hack

 

hi

already tried all imac smbios settings (11,1 and 11,2 and 11,3). no difference. same performance.

i use chameleon wizard always

lately i found out myself the agpm is loaded but when i'm booting in a line it says it has found an unknown device or something like that meaning there's wrong with my agpm kext.

also my console is writing this sometimes

9/27/12 2:34:42.000 AM kernel[0]: Couldn't alloc class "AMDJuniperGraphicsAccelerator"

9/27/12 10:42:07.000 AM kernel[0]: Kext com.apple.iokit.IOAcceleratorFamily - library kext com.apple.iokit.IOGraphicsFamily not found.

i use a premade dsdt for my motherboard and i can't find any vga related in my dsdt.

do i need to define my vga in dsdt?

[artur-pt]

hi

man i answer hundred of post , only say again

update in u profile, u signature with u hardware is easy for us to see what u are speaking

i don't remember witch one hardware

good hack

[Phantomhive]

hi

man i answer hundred of post , only say again

update in u profile, u signature with u hardware is easy for us to see what u are speaking

i don't remember witch one hardware

good hack

 

nah, sorry man. you're totally right.

i've updated my signature with all necessary information.

let me know if you need to know anything else.

[desi-g]

artur-pt said:

hi

 

have u read this

 

http://www.insanelymac.com/forum/index.php?showtopic=208410

 

 

After obtaining this information you should keep a file with the extension *. txt, then proceed on Mac OS X to edit another file system located in

/ System/Library/Displays/Overrides/DisplayVendorID-756e6b6e/DisplayProductID-717

 

to do this make a copy of it to the desk, and changed its name to DisplayProductID-717.plist, introducing the Raw Data obtained by the method described above, an example of the original file and the file already containing the Forced EDID Raw Data

 

first u must know what file is loaded for u display, mine is that..

 

then look for the picture and u will see

 

where u gonna insert u raw data

 

good hack

 

Thanks man  i got it everything is done , but after checking the graphics enabler and ati config @ Chameleon Wizard, which one to select from the drop down list  Alopias, Aloutta etc etc , there are so many 

 

My Graphics card : Madison [Radeon HD 5000M Series], Dev ID : 68C1 , Ven ID : 1002, Ati Mobility Radeon 

[artur-pt]

hello

try

Eulemur

Hoolock

good hack

[desi-g]

i have selected Hoolock , repaired permissions , restart 

 

now my main display goes black and when i connect secondary display it shows blue 

 

any flags to boot up than change the hoolock to any other ?

 

thanks 

 

ok the above have been solved , booted in safe mode and disable graphics enabler .(-v -x)

 

one more thing i would like to know , out of all this four kext files , which one should i edit and add my own venid+devid (if its not present)

 

ATI5000Controller.kext

ATIFramebuffer.kext

ATIRadeonX3000.kext

ATISupport.kext

 

Thanks 

[artur-pt]

hi

only ati5000controller

and atiradeon3000x

good hack

[desi-g]

i have done everything as mentioned , after reboot , apple logo spins and main screen (laptop screen) turns black , then i connect secondary display QE/CI works , graphics card is responding properly, the issue here is that the main display stays black while the secondary display works

whats the solution ? thanks

[Phantomhive]

i have done everything as mentioned , after reboot , apple logo spins and main screen (laptop screen) turns black , then i connect secondary display QE/CI works , graphics card is responding properly, the issue here is that the main display stays black while the secondary display works

whats the solution ? thanks

 

if you go to system preferences - displays try look for an option to "mirror" the screen which means you see exactly the same on both screens.

give it a try.

and have you tried editing your EDID information?

[desi-g]

Phantomhive said:

 

if you go to system preferences - displays try look for an option to "mirror" the screen which means you see exactly the same on both screens.

give it a try.

and have you tried editing your EDID information?

 

Yes i already edited the EDID , i will try the mirror thing , thanks 

[desi-g]

the mirror thing didn't work for me, after many tries i finally got it working(Hoolock) but sometimes the display changes to this ( http://i.imgur.com/CJ12A.jpg ) and sometimes its crystal clear , why is that , any soln ? do we need to use some additional kernel flags ? 

 

Thanks 

[artur-pt]

hello

i don't see nothing special in the image u post

i think is good ?

good hack

[desi-g]

just booted up win7 and i had a look at that screenshot and its clear, but for real the display is like very grainy and text have broken line etc 

thanks for your help 

[daksi99]

Hi Arthur, i change my card with new aty hd3650 vram 256mb.What aticontroller must by change?I am only 3mb vram after update to 10.6.8 .Card is Megalodon RV635 family.Smbios is Mac pro 3.1.Thanks end sorry for my english.

[artur-pt]

hello

i'm afraid is not supported

try the 2600 and 3800

good hack

[daksi99]

hello

i'm afraid is not supported

try the 2600 and 3800

good hack

Thanks for answer, i changed 3800 and x2000 kexts and GraphicsEnabler,Ati config-Megalodon but read only 3800,x2000 and atisupport.No res. and still vram-3mb.

[cdnghost]

Hey, So I am new to all this. I have successfully gotten Mountain Lion 10.8.2 running, my video card seems to be working properly except for one major annoyance...

Here are my system Specs

OS: OS X Mountain Lion 10.8.2

CPU: Intel i7-2600k 3.20GHz

MOBO: Gigabyte GA-Z68MA-DH2-B3 BIOS: U1b

RAM: AMD Performance Edition 4x4GB DDR3 @ 1600MHz

Video: AMD Radeon HD 5870

Monitor: SyncMaster 305t via DVI-D (no other options only has DVI-D in)

HDD: Patriot Pyro SE 120GB SSD, 2 x 2TB Segate HDDs

From power on I get signal showing my Bios screen, followed by the boot menu then the grey apple screen and logo.

This is when things get wired, i loose video screen goes black.

I then have to unplug my monitor and plug it back into the graphics card and then it all works as normal.

One odd thing to me happens though, if I add a second monitor by using an HDMI plug into a toshiba 24" LED TV and have my main

monitor plugged into the DVI port then everything works as it should. Without the second monitor via HDMI I get the black screen...

any suggestions?

Oh my video card has been added to my DSDT so i have a very small boot.plist which is as follows

<?xml version="1.0" encoding="UTF-8"?>

DSDT

/Extra/DSDT.aml

EthernetBuiltIn

Yes

Instant Menu

Yes

Kernel

mach_kernel

USBBusFix

Yes

UseKernelCache

Yes

If any other info is needed I will gladly supply it just want to get to the bottom of this