[Guide] Native USB Fix for Desktops - No Injector/Kext Required - SkyLake+

[swede420]

Hi Madl0n!

This is my SSDT for usb, I want do do native USB patches but I am confused about all those DP01,DP02, exec...

Cn you please help me?

Thanks in advance.

SSDT-3-xh_rvp10.aml.zip

[onemanosx]

[ref]MaLd0n[/ref], My OEM does not contain UMAP and I have difficulty enabling the ports. Even adding UMAP didnt help either.

[MaLd0n]

[ref]swede420[/ref], u need test

Added in 2 minutes 3 seconds:

[ref]onemanosx[/ref], have many variations

in my notebook for example

0xff enable and Zero disable

https://i.imgur.com/V1QEL7C.png' alt='IMGUR>'>

[swede420]

[ref]swede420[/ref], u need test

 

I have bild this one but when I boot with it no USB att all. Can you please take a look?

SSDT-3-xh_rvp10-E.aml.zip

[MaLd0n]

[ref]swede420[/ref], u have a many ports disable, many many, check all and put One

[swede420]

[ref]swede420[/ref], u have a many ports disable, many many, check all and put One

 

How do I check? Is there a utility for it?

[MaLd0n]

[ref]swede420[/ref], read first post, u need check all _UPC

[swede420]

Now I thought I got it right but one port does not work. Tried to enable the disabled ports one by one but it did not work. What can I do?

Send me Alijans-iMac.zip

SSDT-3-xh_rvp10-e2.aml.zip

[MaLd0n]

[ref]swede420[/ref], full efi folder, replace, reboot and check if work, don't change nothing, just replace full efi

EFI.zip

[swede420]

[ref]swede420[/ref], full efi folder, replace, reboot and check if work, don't change nothing, just replace full efi

EFI.zip

Thankyou, but it did not work. The same USB port still don't work, it is working until boot though.

[MaLd0n]

[ref]swede420[/ref], extract one send_me with last files

[swede420]

Thankyou again for helping me out on this.

Send me iMacsomorAlijan.zip

[MaLd0n]

[ref]swede420[/ref], all ports is load now, if don't work, use usbinjectall

[swede420]

[ref]swede420[/ref], all ports is load now, if don't work, use usbinjectall

 

For som reason even if I use usbinjectall only USB3 devices will load on the port that I though not working.

[MaLd0n]

[ref]swede420[/ref], if u use usbinjectall, just use kext + usb port limit patch, remove ssdt

[swede420]

[ref]swede420[/ref], if u use usbinjectall, just use kext + usb port limit patch, remove ssdt

 

same, thanks. I am tired of this so I will drop it as is. Thankyou

[janjao]

Hi Maldon, can u give more details of how to do it? How do i check OEM SSDT's? Wich tool i have to use to edit, etc... Im a newbie in patching this stuffs, and im slowing learning about.

[MaLd0n]

[ref]janjao[/ref], vc tem de conferir as SSDTs OEM da sua placa mãe, pode usar o MacIasl

https://Olarila.com/files/Utils/MaciASL.app.zip

[janjao]

É necessário fazer esse patch? ou se eu usar os kexts e o patch de limit o usb já funciona 100%?

[MaLd0n]

[ref]janjao[/ref], se vc usar kexts e o patch vai funcionar bem, isso é o método vanila sem as kexts de terceiros

[mathewgx]

@MaLdOn,

I use a patched SSDT-2-xh_OEMBD,aml in Clover which works fine.

But on OpenCore it doesn't. I have to use usbinjectall.kext and UIAC.aml.

Is something else I need to add to OpenCore to use SSDT-2-xh_OEMBD?

SSDT-2-xh_OEMBD.aml.zip

[MaLd0n]

[ref]mathewgx[/ref], with opencore u need drop oem table and add edited oem table, Acpi/Block/TableLength

[RandomTech7]

my laptop usb type c is not under HSxx or SSxx, looking to IOReg its under psxs, is that ok?

I'm using USBInjectAll + SSDT-UIAC

[MaLd0n]

[ref]RandomTech7[/ref], extract one send_me

[RandomTech7]

extract one send_me

sorry I forget to mention is showing as usb 3.1 under "about this mac"

here is sendme::

Send me MacBook-Pro.zip