Asus Rog Strix II GL704GM - installation

[MaLd0n]

[ref]MarsArtis[/ref], i think in ur case u need follow it

https://github.com/alexandred/VoodooI2C/blob/master/Documentation/GPIO%20Pinning.md

audio, is just a correct layout-id, if don't work, go to Mirone's tread

[MarsArtis]

let's see what I can do.

Anyway, at the https://github.com/alexandred/VoodooI2C/blob/master/Documentation/GPIO%20Pinning.md

the screenshot link are gone. How to have a look at them?

[MaLd0n]

[ref]MarsArtis[/ref], report it there

[MarsArtis]

I've tried AppleHDA pathcer, and Jarvis report is the following:

Hardware info:
- Realtek (Unknown) (10ec:0294) Rev.(00100004)
- Controller 8086:a348 (sub-ven:1043:1321)
- Driver: AppleHDA.kext

SSDT-4.aml succesfully extracted!
DSDT.aml succesfully extracted!
SSDT-6.aml succesfully extracted!
SSDT-1.aml succesfully extracted!
SSDT.aml succesfully extracted!
SSDT-3.aml succesfully extracted!
SSDT-8.aml succesfully extracted!
SSDT-5.aml succesfully extracted!
SSDT-7.aml succesfully extracted!
SSDT-2.aml succesfully extracted!
Found "Device (HDEF)" in DSDT.aml
Found "Device (HDAU)" in DSDT.aml
No property "layout-id" was found inside your ACPI tables, maybe injected in other way, looking in ioreg..
Found supported "layout-id = 7" in ioreg: be sure that respect your audio connectors
Found more than one "Device (HDAU/B0D3)" inside your ACPI tables. Please remove those excessive!

AppleHDA Patcher.app only supports (if patched by Mirone):
layout-id 2 for laptop's,
layout-id 5 for Desktop's with 3 connectors (pink, green and blue),
layout-id 7 for Desktop's with 5/6 connectors (gray, black, orange, pink, green and blue),
layout-id 9 for Desktop's with 5/6 connectors (gray, black, orange, pink, green, blue, CodecAddress:2)

aDummyHDA.kext works only is /System/Library/Extensions.
Laptop's may be need the provided ACPI Patch such system_IRQ.txt to be functional.
HDAEnabler.kext maybe usefull if you don't want to edit your ACPI table or the Clover's config,
or the org.Chameleon.Boot.plist.
CodecCommander.kext is usefull in the case you have no sound after waking from sleep.

Generated kexts should be installed in a proper way, repairing its permissions and rebuilding the cache:
dragging kexts into Pandora's Box.app window will help you to do that!

 

there few things that attract my attention:

• Found supported "layout-id = 7" in ioreg: be sure that respect your audio connectors
  
  Found more than one "Device (HDAU/B0D3)" inside your ACPI tables. Please remove those excessive!

 

what do you think?

[MaLd0n]

[ref]MarsArtis[/ref], check with Mirone, he solve it

[MarsArtis]

audio is alc294, u have some option, inject via clover

 

FYI

on the Asus support site I've found Windows10 drivers.

The text file inside the zip says:

 

Vendor:Realtek
Category:Audio
Module:ALC668

[MaLd0n]

[ref]MarsArtis[/ref], dump from macos say alc294

u can use a windows or linux for check it

[MarsArtis]

meanwhile I'm following Mirone for the audio aspect I'm trying to patch the trackpad using https://github.com/alexandred/VoodooI2C ... Pinning.md

I'd like your advice for these points at guide:

-------------

POINT #1

-------------

• Step 2c: Ensuring your device is well-pinned[/b]
  
  Even if the number appearing in the above Name is 0x0, it is still possible that your device is well-pinned. It is fairly easy to determine whether or not it is indeed well-pinned. Find the _CRS method of your device. If you can find a line that looks like this:
  
  
  
  Return (ConcatenateResTemplate (SBFB, SBFG))
  
  Then your device is well-pinned. Warning: this is not the same as the following:
  
  
  
  Return (ConcatenateResTemplate (SBFB, SBFI))
  
  you need SBFG and not SBFI.

in my DSDT I got this:

            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
           {
               Return (ConcatenateResTemplate (SBFB, SBFI))
           }

 

should I replace SBFI with SBFB to have: Return (ConcatenateResTemplate (SBFB, SBFB)) ?

-------------

POINT #2

-------------

Step 2d: Manually pinning your device

I've found that the needed hex is 0x47

But If I ad any line in MaciASL to the DSDT like the guide says:

 Name (SBFB, ResourceTemplate ()
           {
               I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80,
                   AddressingMode7Bit, "\\_SB.PCI0.I2C1",
                   0x00, ResourceConsumer, _Y31, Exclusive,
                   )
                   {   // Pin List
                       0x47
                       }              
           })
           Name (SBFI, ResourceTemplate ()
           {
//                Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
//                {
//                    0x0000005F,
//                }

 

I get a compile error:

syntax error, unexpected '{' which refers to the line { // Pin List

[MaLd0n]

[ref]MarsArtis[/ref], 1- if u change to sbfg need change in return too

2- if u add two }, need add two { or gain a compiler error

[MarsArtis]

[ref]MarsArtis[/ref], 1- if u change to sbfg need change in return too

 

apart the return i've found other 4 instances of SBFI (under device PSDC, should I change them too?

[MaLd0n]

[ref]MarsArtis[/ref], no, change only ur device i2c, check in ioreg

[MarsArtis]

Mald0n

I think I've succesfully patched the DSDT.aml following the guide.

But I'm not able to find VoodooGPIO.

Latest release of VoodooI2C-2.1.6 does not contain VoodooGPIO.kext.

Any clue?

Added in 13 minutes 46 seconds:

this is the DSDT edited according to the guide.

the device name in IOreg is ETPD

the resulting hex is 0x47

DSDT.aml.zip

[MaLd0n]

[ref]MarsArtis[/ref], check if load in ioreg

[MarsArtis]

have a look please

ioregscreen 2019-04-18 alle 19.25.30.png.zip

MacBook Pro di Astrix-18-apr.ioreg.zip

[MaLd0n]

[ref]MarsArtis[/ref], is a ELAN1200

add a Elan kext, reboot and test

[MarsArtis]

where to get it, please? I'm unable to find anywhere

[MaLd0n]

[ref]MarsArtis[/ref], Arquivo Comprimido.zip

[MarsArtis]

silly me, I was looking for a simply ELAN.kext

Added in 5 minutes 13 seconds:

something I was thinking over about Audio patching (Mirone has not yet replied).

as said with injected 11, 12, 13 the audio device seems to be "there" (mic meter moves up and down).

The strange thing I noticed is that among the audio option it lists:

• headphones jack

• internal speakers

• HDMI output

 

should the HDMI be there or not?

[MaLd0n]

[ref]MarsArtis[/ref], if u test all layout for ur audio codec and don't work, wait Mirone

[MarsArtis]

[ref]MarsArtis[/ref], Arquivo Comprimido.zip

 

Still no luck, even adding VoodooI2CELAN.kext the trackpad is not working.

Send me MacBook-Pro-di-Astrix18--4-2019.zip