Asus Rog Strix II GL704GM - installation

[MaLd0n]

[ref]MarsArtis[/ref], is a full dump, check here

--Run_Me

RunMe.app

">

[MarsArtis]

here it comes

Send me MacBook-Pro-di-Astrix.zip

[MarsArtis]

any news Maldon?

[MaLd0n]

[ref]MarsArtis[/ref], replace dsdt in clover/acpi/patched

DSDT.aml.zip

add 3 kexts in clover/kexts/other

Arquivo Comprimido.zip

reboot

press f4 key in clover boot screen

boot into system

extract new send_me

[MarsArtis]

followed your instructions.

OSX is not loading anymore with this final message (please have a look at picture inside the archive).

 

verbose-error_IMG_20190416_200847.jpg.zip

[MaLd0n]

[ref]MarsArtis[/ref], need rebuild cache, try block kext

https://Olarila.com/forum/viewtopic.php?f=28&t=9317

[MarsArtis]

which kext to block? just USBinjectall?

and to rebuild the cache should I use Mac Optimizer v2.4 or something else?

[MaLd0n]

[ref]MarsArtis[/ref], block voodooi2c kexts

[MarsArtis]

[ref]MarsArtis[/ref], block voodooi2c kexts

Ok, blocked voodooi2c kexts.

OSX started (this time the screen light is no more dimmed down!)

Used Mac Optimizer to rebuild cache and NVRAM, rebooted and now another kexts stall ApplePS2MouseDevice.

Waited about 3/5 minutes and osx finally started.

working

LAN

Battery Status

partially working

screen backlight is finally restored but I've no control over it neither via System PReferences/Monitor nor via keyboard FN keys

not working

AUDIO

trackpad

SD card reader

Send me MacBook-Pro-di-Astrix-16-apr-19.zip

[MaLd0n]

[ref]MarsArtis[/ref], check if trackpad work now

DSDT.aml.zip

 

audio is alc294, u have some option, inject via clover

[MarsArtis]

Wow, I thought that I had an ALC1220

So, to inject the ALC294 audio I should go in Clover/Devices and try in the inject field 11, 12, 13 or 21 and check if one of these works, am I wrong?

[MaLd0n]

[ref]MarsArtis[/ref], one by one, inject, save, reboot, test

[MarsArtis]

feedback:

working

LAN

Battery Status (just noticed that battery drains way too fast)

partially working

screen backlight is finally restored but I've no control over it neither via System PReferences/Monitor nor via keyboard FN keys

not working

AUDIO

• 11,12,13 injected - audio appears in sys preferences but I get no AUDIO AT ALL

• 21 injected NO audio output listed in SYS pref

trackpad

SD card reader

Send me MacBook-Pro-di-Astrix-16-apr-19(2).zip

[MaLd0n]

[ref]MarsArtis[/ref], try repair permission, copy to desktop and run .command inside folder

https://Olarila.com/files/Utils/RepairPermissions.zip

[MarsArtis]

[ref]MarsArtis[/ref], try repair permission, copy to desktop and run .command inside folder

https://Olarila.com/files/Utils/RepairPermissions.zip

 

I'm curious, why not simply use DiskUtility to repair permissions?

anyway:

correted permissions,

system restarted.

still no audio end no trackpad

Send me MacBook-Pro-di-Astrix-17-apr-19-permissions.zip

config.plist.zip

[MaLd0n]

[ref]MarsArtis[/ref], i think in ur case u need follow it

https://github.com/alexandred/VoodooI2C/blob/master/Documentation/GPIO%20Pinning.md

audio, is just a correct layout-id, if don't work, go to Mirone's tread

[MarsArtis]

let's see what I can do.

Anyway, at the https://github.com/alexandred/VoodooI2C/blob/master/Documentation/GPIO%20Pinning.md

the screenshot link are gone. How to have a look at them?

[MaLd0n]

[ref]MarsArtis[/ref], report it there

[MarsArtis]

I've tried AppleHDA pathcer, and Jarvis report is the following:

Hardware info:
- Realtek (Unknown) (10ec:0294) Rev.(00100004)
- Controller 8086:a348 (sub-ven:1043:1321)
- Driver: AppleHDA.kext

SSDT-4.aml succesfully extracted!
DSDT.aml succesfully extracted!
SSDT-6.aml succesfully extracted!
SSDT-1.aml succesfully extracted!
SSDT.aml succesfully extracted!
SSDT-3.aml succesfully extracted!
SSDT-8.aml succesfully extracted!
SSDT-5.aml succesfully extracted!
SSDT-7.aml succesfully extracted!
SSDT-2.aml succesfully extracted!
Found "Device (HDEF)" in DSDT.aml
Found "Device (HDAU)" in DSDT.aml
No property "layout-id" was found inside your ACPI tables, maybe injected in other way, looking in ioreg..
Found supported "layout-id = 7" in ioreg: be sure that respect your audio connectors
Found more than one "Device (HDAU/B0D3)" inside your ACPI tables. Please remove those excessive!

AppleHDA Patcher.app only supports (if patched by Mirone):
layout-id 2 for laptop's,
layout-id 5 for Desktop's with 3 connectors (pink, green and blue),
layout-id 7 for Desktop's with 5/6 connectors (gray, black, orange, pink, green and blue),
layout-id 9 for Desktop's with 5/6 connectors (gray, black, orange, pink, green, blue, CodecAddress:2)

aDummyHDA.kext works only is /System/Library/Extensions.
Laptop's may be need the provided ACPI Patch such system_IRQ.txt to be functional.
HDAEnabler.kext maybe usefull if you don't want to edit your ACPI table or the Clover's config,
or the org.Chameleon.Boot.plist.
CodecCommander.kext is usefull in the case you have no sound after waking from sleep.

Generated kexts should be installed in a proper way, repairing its permissions and rebuilding the cache:
dragging kexts into Pandora's Box.app window will help you to do that!

 

there few things that attract my attention:

• Found supported "layout-id = 7" in ioreg: be sure that respect your audio connectors
  
  Found more than one "Device (HDAU/B0D3)" inside your ACPI tables. Please remove those excessive!

 

what do you think?

[MaLd0n]

[ref]MarsArtis[/ref], check with Mirone, he solve it

[MarsArtis]

audio is alc294, u have some option, inject via clover

 

FYI

on the Asus support site I've found Windows10 drivers.

The text file inside the zip says:

 

Vendor:Realtek
Category:Audio
Module:ALC668

[MaLd0n]

[ref]MarsArtis[/ref], dump from macos say alc294

u can use a windows or linux for check it

[MarsArtis]

meanwhile I'm following Mirone for the audio aspect I'm trying to patch the trackpad using https://github.com/alexandred/VoodooI2C ... Pinning.md

I'd like your advice for these points at guide:

-------------

POINT #1

-------------

• Step 2c: Ensuring your device is well-pinned[/b]
  
  Even if the number appearing in the above Name is 0x0, it is still possible that your device is well-pinned. It is fairly easy to determine whether or not it is indeed well-pinned. Find the _CRS method of your device. If you can find a line that looks like this:
  
  
  
  Return (ConcatenateResTemplate (SBFB, SBFG))
  
  Then your device is well-pinned. Warning: this is not the same as the following:
  
  
  
  Return (ConcatenateResTemplate (SBFB, SBFI))
  
  you need SBFG and not SBFI.

in my DSDT I got this:

            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
           {
               Return (ConcatenateResTemplate (SBFB, SBFI))
           }

 

should I replace SBFI with SBFB to have: Return (ConcatenateResTemplate (SBFB, SBFB)) ?

-------------

POINT #2

-------------

Step 2d: Manually pinning your device

I've found that the needed hex is 0x47

But If I ad any line in MaciASL to the DSDT like the guide says:

 Name (SBFB, ResourceTemplate ()
           {
               I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80,
                   AddressingMode7Bit, "\\_SB.PCI0.I2C1",
                   0x00, ResourceConsumer, _Y31, Exclusive,
                   )
                   {   // Pin List
                       0x47
                       }              
           })
           Name (SBFI, ResourceTemplate ()
           {
//                Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
//                {
//                    0x0000005F,
//                }

 

I get a compile error:

syntax error, unexpected '{' which refers to the line { // Pin List

[MaLd0n]

[ref]MarsArtis[/ref], 1- if u change to sbfg need change in return too

2- if u add two }, need add two { or gain a compiler error

[MarsArtis]

[ref]MarsArtis[/ref], 1- if u change to sbfg need change in return too

 

apart the return i've found other 4 instances of SBFI (under device PSDC, should I change them too?