macOS Mojave 10.14.3: IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0

[Morselina]

[ref]MaLd0n[/ref], tried but same result, empty combos and no patching possible, see screenshots - any ideas ?

Added in 1 minute 20 seconds:

As shown battery works, NTFS using clover configurator also works.

Only RAM is 7MB, but this is the most important

[erroruser]

[ref]Morselina[/ref], as it appears your using a nvidia card it is not supported in mojave

[Morselina]

[ref]erroruser[/ref], I have NVidia GTX 1050Ti , but I have disabled the card and am using only integrated Intel HD Graphics 630, which is supported in Mojave. I had 1536 VRAM in High Sierra, but only 7MB VRAM in Mojave and the combos in hackintool are empty to be able to configure video framebuffer patching

[Morselina]

[ref]erroruser[/ref], [ref]MaLd0n[/ref], I think I am very close to the final solution - I have done a little bit of experimentation with different configs and framebuffers and discovered that if I dont have ig_platform_id/fakeid 3D acceleration and WhateverGreen (for more VRAM) is starting but i get stuck on IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0 and black screen.

Otherwise i can boot Mojave, without 3D acceleration and only 7VRAM.

Any possible solution to boot Mojave with 3D acceleration ?

PS : Attached configs work but only with ig_platform_id = 0x12345678 or 0x0000130B

config.txt

config4.txt

[erroruser]

[ref]Morselina[/ref], post run me http://Olarila.com/files/Utils/RunMe.app.zip

[Morselina]

Here you are - nice tool btw

Added in 1 minute 31 seconds:

[ref]erroruser[/ref], is this enough or I should send something more ?

Added in 2 minutes 12 seconds:

btw I use config3.plist from clover dir with ig_platform_id = 0x0000130B

Send me Ivans-MacBook-Pro.zip

[erroruser]

[ref]Morselina[/ref], try CLOVER.zip save yours an have usb for safety boot

Added in 47 seconds:

i think dsdt patch will help also

http://Olarila.com/forum/viewtopic.php?f=19&t=1131

[Morselina]

[ref]erroruser[/ref], I have tried but get stuck on IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0 and black screen.

Backed UP Clover, then deleted Clover and replaced with your Clover.

With Original Config and modified with 0x0000130B ig_platform_id same result - black screen

Do you have other clover to try or only dsdt patch will help me, so i should request one ?

[erroruser]

[ref]Morselina[/ref], i edit clover folder that should be used for notebooks from here https://Olarila.com/forum/viewtopic.php?f=28&t=8222

so it maybe good to have the dsdt as it fixes many issues

try an see after completed

the patched dsdt will need to be in the efi/efi/clover/acpi/patched folder

[Morselina]

[ref]erroruser[/ref], ok thanks, i have sent maldon a dsdt request and when dsdt is ready will try it

[Morselina]

[ref]MaLd0n[/ref], [ref]erroruser[/ref], I have discovered something - the problem is that Mojave 10.14.3 boots but monitor shows no screen. I can login with teamviewer and see my screen with 1536 VRAM and even i can stream the screen to airplay device.

The problem is - monitor doesn show screen and connection type is displayport, which i don't have. physically. I think my display doesnt get detected.

Any suggestions ?

Many thanks in advance !

[erroruser]

[ref]Morselina[/ref], your gpu will not work with mojave you need to stay at high sierra

[Morselina]

[ref]erroruser[/ref], NVidia 1050Ti will not work, but my integrated graphics card Intel HD Graphics 630 works in Mojave 10.14.3 and I boot with 1536 VRAM, but I can only see the screen if i login via TeamViewer with another PC or cast the screen via Anycast to my TV.

Everything works even my Bluetooth, except my integrated display i.e. monitor. Somehow signal gets redirected to DisplayPort, which i don't have and i cannot figure out how to redirect the signal to my laptop screen.

Any ideas ?

[erroruser]

im not sure but try to remove the power cord from monitor an replug in maybe that would do the trick

[Morselina]

[ref]erroruser[/ref], my laptop is brand new, so i violate the guarantee if I open it to remove power cord from monitor.

Update: Everything except the display works on Mojave 10.14.3. Via TeamViewer I have cast the screen (internal display) to my TV and can see that after framebuffer patching I have now 1536 VRAM and Metal works, but black screen with backlight.

Interesting is that when i adjust brightness in Mojave , my backlit turns brighter or darker, but still black screen on laptop display, so Mojave detects the display but cannot print the screen on it.

Any suggestions ?

[flex21]

[ref]erroruser[/ref], my laptop is brand new, so i violate the guarantee if I open it to remove power cord from monitor.

Update: Everything except the display works on Mojave 10.14.3. Via TeamViewer I have cast the screen (internal display) to my TV and can see that after framebuffer patching I have now 1536 VRAM and Metal works, but black screen with backlight.

Interesting is that when i adjust brightness in Mojave , my backlit turns brighter or darker, but still black screen on laptop display, so Mojave detects the display but cannot print the screen on it.

Any suggestions ?

Hi, do you see your display in IORegistryExplorer ?

[Morselina]

[ref]flex21[/ref], i dont recall exactly, but when i got home i will try edid injection to see if it will work. How do you get your edid code btw ?

[flex21]

[ref]flex21[/ref], i dont recall exactly, but when i got home i will try edid injection to see if it will work. How do you get your edid code btw ?

windows + this utilit https://www.entechtaiwan.com/util/moninfo.shtm

[Morselina]

and then how do you inject the code into clover ?

Added in 15 minutes 58 seconds:

[ref]flex21[/ref], how do you convert the hex EDID from MonInfo into clover readable EDID ?

[Morselina]

[ref]flex21[/ref], for me edid doesnt work. Clover configurator pastes it into

Graphics

EDID

Custom

AP///////wAw5DMFAAAAAAAaAQSVIhN46qHFlFlXjycgUFQAAAAB

AQEBAQEBAQEBAQEBAQEBLjaAoHA4H0AwIDUAWMIQAAAaAAAAAAAA

AAAAAAAAAAAAAAAAAAAA/gBMRyBEaXNwbGF5CiAgAAAA/gBMUDE1

NldGNi1TUEszAL8=

Inject

This doesnt work - black screen

Then i copied the id-data and paste it into

Devices

Properties

PciRoot(0)/Pci(0x2,0)

AAPL00,override-no-connect

AP///////wAw5DMFAAAAAAAaAQSVIhN46qHFlFlXjycgUFQAAAAB

AQEBAQEBAQEBAQEBAQEBLjaAoHA4H0AwIDUAWMIQAAAaAAAAAAAA

AAAAAAAAAAAAAAAAAAAA/gBMRyBEaXNwbGF5CiAgAAAA/gBMUDE1

NldGNi1TUEszAL8=

Also black screen

You have

AAPL,ig-platform-id

AACbPg==

and

device-id

kT4AAA==

disable-external-gpu

AQAAAA==

in your

Devices

Properties

PciRoot(0)/Pci(0x2,0)

Maybe i should have some ig-platform-id and device id

Do you use hackintool for framebuffer patching ?