macOS Mojave 10.14.3: IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0

[erroruser]

you do not change the clover folder on the usb you add the clover folder to the main drive after it has completed the install an do not use mojave you can only use high sierra with your gpu

[Morselina]

[ref]erroruser[/ref], You mean I cannot use Mojave on my laptop with my integrated graphics card Intel HD Graphics 630 ?

I have been told that Mojave will work on HD 630 and that NVIDIA 1050TI for Notebooks is not supported(Optimus)

[erroruser]

[ref]Morselina[/ref], ok yes you can have mojave with hd 630 with nvidia disabled but with the installer do not replace the clover folder an to disable the nvidia add nv_disable=1 to boot args an add 12345678 to the fake id for intel an see if that helps

[Morselina]

[ref]erroruser[/ref], you suggest that i should not use CLOVER.NOTEBOOKS.100.200.300 for the installer, but only to try to boot Mojave with burned img to the flash drive with nv-disable = 1 and fake ig_platform_id (not fake id for cpu). No replacement of clover folders at all?

[erroruser]

yes also for the laptop to use config2 in the bootscreen options then config to change for config2

[Morselina]

[ref]erroruser[/ref], i have tried your suggestion. As a result i get the same error for which I started the topic IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0.

So i tried with the -x flag to boot in save mode. This resulted in kernel panic.

Fresh burned img to flash drive with -> nv_disable=1 and -x added => kernel panic

Any suggestions?

Thanks in advance for your effort!

[erroruser]

try add Aptiomemory + emuvariable then try replace Aptiomemory with an try with 2. Aptiofixdrv + emuvariable 3. Aptiofix2drv +emuvariable 4. Aptiofix3drv+emuvariable if you do not have a mac to to use clover config to download i have them here https://drive.google.com/open?id=1MtgkRpc9s7cZX6xIBQRezNNO5i8O1w-0

[Morselina]

Thanks for the upload.

In order to avoid confusion - I should place only one AptioDriver + Emuvariable in order to work - is that right or I shall use drivers64uefi folder with all drivers.

And should I use -x boot flag and nv_disable=1 and fake platform id with aptio drivers.

So i will have 4 possible combinations, one of which should work

[MaLd0n]

[ref]Morselina[/ref], u need remove -x, etc if u have a patches in config.plist

[Morselina]

[ref]MaLd0n[/ref], finally after many efforts I have managed to boot and install Mojave 10.14.3 using the following (to help others with similar problem) :

*Burn the img of Olarila Mojave 10.14.3 to the flash drive

*copy EmuVariableUefi-64.efi and OsxAptioFix3Drv-64.efi to Drivers64UEFI folder

*remove AptioMemoryFix-64.efi (only 1 memory fix at a time)

*MOST IMPORTANT -> copied the config from MaLd0n as Config3.plist

*Added -x nv_disable=1 and fake_id = 0x12345678 and ig_platform_id = 0x12345678

*Booted installer

ALSO IMPORTANT -> When i installer over High Sierra I stuck in installer errors with log, so i reformated my drive and did clean install and it worked.

PROBLEMS SO FAR:

1) But using ig_platform_id I have now 7MB VRAM -> See attached picture

2) NTFS of my HDD is not recognized

Any suggestions how to fix the problems?

Many Many thanks in advance!

I would'n have succeeded without your help!!!

Added in 34 minutes 30 seconds:

One more problem USB 3 are not working

[MaLd0n]

[ref]Morselina[/ref], u need create a video patch here

https://www.insanelymac.com/forum/topic/335018-hackintool-v183/

usb

https://Olarila.com/forum/viewtopic.php?p=65287#p65287

[Morselina]

[ref]MaLd0n[/ref], can you pls give me details for the easiest way to create video framebuffer patch to have 1536 VRAM, because i have tried several fake id and fake ig_platform_id and no success at all - only 7 MB VRAM

If there is a video i will highly appreciate it

Many thanks in advance !

[Morselina]

An Update : I have found out that battery is not recognised by Mojave and cannot enable battery status

Added in 5 minutes 30 seconds:

I have tried hackintool, but all fields are empty- intel gen, platform id, cannot generate patch ...

Added in 3 minutes 13 seconds:

Btw I have found something useful, but don't know how to fully use it. FakeID and platform work, but again 7MB VRAM. Maybe the key is in the other text :

ID: 591B0000, STOLEN: 38 MB, FBMEM: 21 MB, VRAM: 1536 MB, Flags: 0x0000130B

TOTAL STOLEN: 39 MB, TOTAL CURSOR: 1 MB (1572864 bytes), MAX STOLEN: 136 MB, MAX OVERALL: 137 MB (144191488 bytes)

GPU Name: Intel HD Graphics 630

Model Name(s): MacBookPro14,3

Camelia: Disabled, Freq: 1388 Hz, FreqMax: 1388 Hz

Mobile: 1, PipeCount: 3, PortCount: 3, FBMemoryCount: 3

[0] busId: 0x00, pipe: 8, type: 0x00000002, flags: 0x00000098 - LVDS

[2] busId: 0x04, pipe: 10, type: 0x00000800, flags: 0x00000187 - HDMI

[3] busId: 0x06, pipe: 10, type: 0x00000400, flags: 0x00000187 - DP

00000800 02000000 98000000

02040A00 00080000 87010000

03060A00 00040000 87010000

[Morselina]

[ref]MaLd0n[/ref], Any suggestions what i should try next - unfortunately all fields in hackingtool are empty and i cannot generate patch. Even if i could how to use the patch ?

[MaLd0n]

[ref]Morselina[/ref],

[Morselina]

[ref]MaLd0n[/ref], tried but same result, empty combos and no patching possible, see screenshots - any ideas ?

Added in 1 minute 20 seconds:

As shown battery works, NTFS using clover configurator also works.

Only RAM is 7MB, but this is the most important

[erroruser]

[ref]Morselina[/ref], as it appears your using a nvidia card it is not supported in mojave

[Morselina]

[ref]erroruser[/ref], I have NVidia GTX 1050Ti , but I have disabled the card and am using only integrated Intel HD Graphics 630, which is supported in Mojave. I had 1536 VRAM in High Sierra, but only 7MB VRAM in Mojave and the combos in hackintool are empty to be able to configure video framebuffer patching

[Morselina]

[ref]erroruser[/ref], [ref]MaLd0n[/ref], I think I am very close to the final solution - I have done a little bit of experimentation with different configs and framebuffers and discovered that if I dont have ig_platform_id/fakeid 3D acceleration and WhateverGreen (for more VRAM) is starting but i get stuck on IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0 and black screen.

Otherwise i can boot Mojave, without 3D acceleration and only 7VRAM.

Any possible solution to boot Mojave with 3D acceleration ?

PS : Attached configs work but only with ig_platform_id = 0x12345678 or 0x0000130B

config.txt

config4.txt

[erroruser]

[ref]Morselina[/ref], post run me http://Olarila.com/files/Utils/RunMe.app.zip

[Morselina]

Here you are - nice tool btw

Added in 1 minute 31 seconds:

[ref]erroruser[/ref], is this enough or I should send something more ?

Added in 2 minutes 12 seconds:

btw I use config3.plist from clover dir with ig_platform_id = 0x0000130B

Send me Ivans-MacBook-Pro.zip

[erroruser]

[ref]Morselina[/ref], try CLOVER.zip save yours an have usb for safety boot

Added in 47 seconds:

i think dsdt patch will help also

http://Olarila.com/forum/viewtopic.php?f=19&t=1131

[Morselina]

[ref]erroruser[/ref], I have tried but get stuck on IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0 and black screen.

Backed UP Clover, then deleted Clover and replaced with your Clover.

With Original Config and modified with 0x0000130B ig_platform_id same result - black screen

Do you have other clover to try or only dsdt patch will help me, so i should request one ?

[erroruser]

[ref]Morselina[/ref], i edit clover folder that should be used for notebooks from here https://Olarila.com/forum/viewtopic.php?f=28&t=8222

so it maybe good to have the dsdt as it fixes many issues

try an see after completed

the patched dsdt will need to be in the efi/efi/clover/acpi/patched folder

[Morselina]

[ref]erroruser[/ref], ok thanks, i have sent maldon a dsdt request and when dsdt is ready will try it