Install MacOS with Vanilla Olarila Image, Step by Step

[erystr]

I got a little (or not little) problem with installer. I succeeded to run clover without glitches (enable only uefi boot but with csm enable - only UEFI without CSM causes graphic glithes instead of clover gui), but when I try to run installer (after changing plist to plist2) I got a little moment freeze on this screen: https://drive.google.com/file/d/1ywlnUakG6C4-yiiLOjJFbfzUkXRkInLb/view?usp=sharing , and after couple seconds I got another glitches with error mark in background - https://drive.google.com/file/d/1ykGbUgT1W7Vc-io_TxJG1gR-RETLqq8l/view?usp=sharing. What have I done wrong? What should I do now? Pendrive was made by balenaEtcher on Win10 because I dont own any Mac so I cant just make bootable pendrive on MacOS.

My laptop is Lenovo B580 (motherboard 20144). CPU is Intel i5-3360m (swapped from Pentium). Graphics card is integrated Intel HD 4000. 8GB RAM DDR3 1600mhz. Chipset is Intel HM77. Touchpad is Synaptics SYN0334. Sound card is Realtek HD Audio (HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_17AA500A). LAN card is Realtek PCIe GbE. Wifi/BT combo card is Atheros AR9285 (Dell wireless 1702). What else do you need from my specification?

Big thanks for reply

[MaLd0n]

I got a little

try with injectintel in ur config.plist and use usb 2 port

[Shabbir92]

Hi MaLd0n,

can you please guide me about my Laptop Hardware: HP probook 4540s (i5-3230M) 8GB (intel 4000)

installation stopped at "waiting for root device"

Please help

[MaLd0n]

Hi MaLd0n

u use usb 2 port?

[Shabbir92]

I have tried 3.0 as well as well 2.0

result same issue

[erystr]

try with injectintel in ur config.plist and use usb 2 port

 

Well I find out what the problem was. I disabled usb 3.0 ports (so even dedicated 3.0 ports work as 2.0) and installation finally started

Now I got another problem MacOS is installed but I cant start it without clover in installation pendrive. I tried to install Clover but installation always end with "failed to install" error... I tried to manually enable visibility of EFI partition in Finder, but theres nothing inside, and still Clover cant make installation succesful...

[MaLd0n]

Well

if u have a uefi mobo, don't need install nothing, just paste efi folder into efi partition

[magodioz]

paste efi folder in efi partition, use it to mount efi

https://Olarila.com/files/Utils/ESP%20Mounter%20Pro.app_v1.9.1.zip

 

I've open ESP Mounter Pro, I see my SSD, with mount disk0s1, if I select find open/Volumes/EFI or amount disk0s1. How I proceed now?

[MaLd0n]

I've open ESP Mounter Pro, I see my SSD, with mount disk0s1, if I select find open/Volumes/EFI or amount disk0s1. How I proceed now?

 

just mount efi partition in ur macos ssd

[thezemo]

use intelgfx 0x12345678 for vesa mode

 

Do I make this change using clover configurator in the devices section?

[MaLd0n]

Do I make this change using clover configurator in the devices section?

 

try with bootarg -igfxvesa

[dikatuex]

thanks maldon for this guide..

[magodioz]

just mount efi partition in ur macos ssd

 

And after that, how i replace my efi with that of chipset folder of the link?

[MaLd0n]

And after that, how i replace my efi with that of chipset folder of the link?

serie 100/200/300

[magodioz]

Ok, after to have replaced refi, can I remove the usb stick and restart without it or do I have to do anything else? if i update the system, do i have to replace the efi again or what should i do? thank you.

[MaLd0n]

Ok, after to have replaced refi, can I remove the usb stick and restart without it or do I have to do anything else? if i update the system, do i have to replace the efi again or what should i do? thank you.

 

paste efi, reboot

[magodioz]

paste efi, reboot

 

I reboot without usb stick? And if i upgrade at today version of catalina, i have to replace another time EFI?

[MaLd0n]

I reboot without usb stick? And if i upgrade at today version of catalina, i have to replace another time EFI?

no

read first post

[guiguigui]

funciona em plataforma 775?

[MaLd0n]

funciona em plataforma 775?

 

sim

[magodioz]

I replaced the EFI and tried to restart without USB stick but part Windows directly and if I try to get into the bios the SSD where I installed Catalina is not among those boot despite being visible among the hardware drives.

[Belo2010]

Olá gostaria que alguma me tirasse uma dúvida. Estou a procura da imagem de instalação do Mac Os Sierra Oficial pra fazer a instalação em Macbook oficial, porém não estou encontrando. Gostaria de saber se posso usar a imagem aqui do site pra fazer essa instalação? Caso alguém tenha essa imagem Oficial me consiga o link. Atenciosamente, Belo.

[MaLd0n]

Olá gostaria que alguma me tirasse uma dúvida. Estou a procura da imagem de instalação do Mac Os Sierra Oficial pra fazer a instalação em Macbook oficial, porém não estou encontrando. Gostaria de saber se posso usar a imagem aqui do site pra fazer essa instalação? Caso alguém tenha essa imagem Oficial me consiga o link. Atenciosamente, Belo.

sim, as imagens Olarila servem pra hacks e macs tb, use option e selecione o instalador

[beton3009]

hi MaLd0n

i'm confused i want to dual boot win 10 with mac os catalina

i do install catalina first and then win 10

or win10 first then catalina and why all trids talks about to install catalina on first

thank in advance

[wastedbrain]

Hi there MaLd0n!

I tried to enable filevault, problem is, my hackintosh can't boot afterwards.

Any solution/procedure to have filevault/APFS encrypted working?