Install MacOS with Vanilla Olarila Image, Step by Step

[Spookd]

Well.......I went through the steps as outlined on the first page of installing Clover, setup my BIOS according to what is recommended for z390 Designare and tried to boot from the fresh installed CLover/balenaEtcher USB and it did what all prior EFI's have done to me...didn't work. It goes through the typical lines of code streaming for pages then screen goes black for about 5-10s then flashes the Gigabyte BIOS logo then it auto takes me back to the Olarila Boot screen and has a 5s timer that counts down then tries again. This will go on infinately if I don't stop it.

Please, can someone tell me what the heck is wrong here. I cannot believe the amount of times and EFI files I have tried, that should of worked by now in last two weeks, and had very high hopes this Olarila way would work and unfortunately its failing too.

I cannot for the life of me understand how is it my new hackintosh won't boot into Catalina 10.15.1. As anyone can see, my hardware has had prior success for other people. The only glaring thing about my hardware that is different about the rest is the fact my chip is 9900KS version and not the 9900K, which is what others used. My 9900KS is just a 9900K binned version (higher quality silicon that gives OC speeds from factory). I am also using F8 BIOS which I wouldn't think be an issue.

Can someone please lend me a hand and tell me how I can get this working?

Thanks

[MaLd0n]

[ref]Spookd[/ref], with my efi folder from here don't work?

https://Olarila.com/forum/viewtopic.php?f=97&t=11237

if need use ssdt Olarila to avoid stuck boot, after we solve via dsdt

[Spookd]

[ref]MaLd0n[/ref], I am already using the ACPI>patched>SSDT-Olarila.aml file and not working. Is there something else you recommend?

Is there some way to log the errors or problems in booting up and share that with you and you are able to no exactly what needs fixing to get it to work. I don't have much of any experience with hackintosh so any detailed step by step to get this info for you would be helpful.

Thanks.

[ikbalyasid]

[ref]MaLd0n[/ref], thanks for helping me. but now i can't boot with different distro. i tried sierra but it the same. any ideas for me?

[Prathapsingh]

When i install Catalina in My PC the Screen Shows Unsupported PCH Error and Reboot...

My PC Configration :

GA H110M S2

Core i5 6500

[MaLd0n]

[ref]Prathapsingh[/ref], use intel gfx 0x12345678

[epikingtosh]

Hello, I just change my ssd from 850 evo to 970 evo plus.

I just installed successfully but can not to boot it from my new ssd my monitor go to off after loading . Now I can boot it by usb

I don't know why. Do I need the new dsdt patch?

Thank you!

[6satyan]

I have installed catalina successfully but unable to boot directly from ssd. I have asus x99 with xeon e5 2650v3 now what should i do, plz help me.

[rocky_mtn]

[ref]6satyan[/ref], Did you transfer the bootloader to the SSD?

[Spookd]

[ref]MaLd0n[/ref], I haven't heard back from you what the next step is to take since nothing has worked up to this point and the SSDT Olarila didn't help. What's next to try?

So you know, I did remove the Radeon 7 and Enabled iGPU and tried to boot it and still didn't work.

Is there some way to print or take a picture of log errors/kernel panics so I can show you what they are and you can tell me what has to be fixed to work?

[Prathapsingh]

Prathapsingh, use intel gfx 0x12345678

 

Which place in clover i insert the intel gfx 0x12345678 ?

please explain..

thankyou

[MaLd0n]

[ref]Prathapsingh[/ref], Device tab/IntelGFX

[Prathapsingh]

Device tab/IntelGFX

Not Working. Same Error ...

please help me...

thank you...

[MaLd0n]

[ref]Prathapsingh[/ref], no idea what happens

[bibo2200]

help me please

error boot. missing bluetooth controller transport when i want to install MAVERICKS Olarila

my pc

Dell Precision WorkStation T7500

Ram. 32 GB

Graphics. Nvidia Quadro K4000

Processor. dual Processor XEON E5620 . 2.40GHz

Network. Broadcom NetXtreme 57xx Gigabit Controller

..........

Please help me find the solution

thank you

[MaLd0n]

[ref]bibo2200[/ref], u try with InjectNvidia?

[bibo2200]

bibo2200, u try with InjectNvidia?

yes i try with InjectNvidia and -v and -x boot

and this steps

Boot with -s. When you see the prompt “root:”:

Type: mount -uw /

Type: cd /System/Library/Extensions

Type: mkdir intel_back

Type: mv AppleIntelHD* AppleIntelF* intel_back/

Type: touch ../Extensions

Reboot and use -v flag.

But the problem exists

[MaLd0n]

[ref]bibo2200[/ref], try with other fakesmc version or virtualsmc

[sayerX12]

Iam trying to install high sierra...

I tried with Olarila high sierra image...with deafult & given clover folder.....& also trying with config2.plist...

When i select installer it shows end random seed +++++++++ thn reboot automatically .....

Cpu info: intel core i7 2670QM...8gb ram

Laptop model: fujitsu lifebook AH77/G

Usb legacy enabled......no uefi Settings in bios.. Updated bios to latest.....

Please help me iam trying this since 2017 till now i can't boot into installer....

Iam not giving up.....

[MaLd0n]

[ref]sayerX12[/ref], u need check ur bios config

[sayerX12]

Bios settings----

Advanced >Internal Device configuration----

Serial ATA controller--enabled

AHCI Configuration---enabled

Lan controller--enabled

Wireless lan--enabled

Advanced>CPU Features

Multi-core--Enabled

HT-Technology--Disabled

SpeedStep® Technology--Disabled

Virtualization Technology--Disabled

Advanced>USB Features

Legacy USB Support---enabled

SCSI subclass Support--- enabled

These are my bios config used to boot mac os...but stuck & auto rebooted end randomseed+++++++++

I can't attach jpeg files......so i detailed bios settings.....

[MaLd0n]

[ref]sayerX12[/ref], what system u try?

u can try a other uefi driver

kernel pm is checked?

[mausandre]

Does this guide requires a separate HDD or SSD drive?

If not, If I can install macOS on the same drive as Windows using Windows, what should I do differently?

Righ now I'm able to boot into Clover and run the option to install Olarila macOS, the verbose boot initiates but after that my computer just reboots and I'm back to Clover with the same option to install Olarila macOS.

Maybe I'm dumb but I'm not being able to acces the archives on the USB Stick due to the way it is formated, so I couldn't provide any log information from Clover.

Also, is there any known problem with my setup that may be causing any trouble?

I'm very grateful for any possible help, I'm trying to setup a Hackintosh for almost a week with no success.

[MaLd0n]

[ref]mausandre[/ref], ur processor need a fakecpuid

[puna27_99]

[ref]MaLd0n[/ref],

Hi...

I am getting a little confused at the post installation stage when you advise to run the disablehibernate.command. When I try to do so it asks for password at the terminal window. What is the password if I may ask or how to bypass it?