Install MacOS with Vanilla Olarila Image, Step by Step

[MaLd0n]

[ref]laugustofrontend[/ref], DSDT.aml.zip

https://Olarila.com/files/Utils/nvidia-update.command.zip

[ajiboot]

hai

my laptop acer 4752g and bios legacy only,

how to instal high sirrea on bios legacy ?

and set up clover to suitable????

[MaLd0n]

[ref]ajiboot[/ref], https://Olarila.com/files/Clover.Folder/CLOVER.NOTEBOOKS.SERIES.CHIPSET.zip

[ajiboot]

thnks sir so i can replace in partition efi with it ?

[laugustofrontend]

muito obrigado, MaLd0n

[trenetics]

Created the Ola Mojave img USB key, and booted on my new

Lenovo M920x

Intel Q370 Chipset

Intel I5-8400 will be using iGPU UHD 630

It has 2x Intel NVMe drives installed

It just get stuck at first boot, after i create APFS on the NVMe, it freezes at 3 minutes remaining?

[MaLd0n]

[ref]trenetics[/ref], extract tables with f4 key in clover boot screen files generated in Clover/Acpi/origin, post here

[theleoj1]

Hi MaLd0n,

It's my first building hackintosh from your image high sierra, I have done everything as guide post viewtopic.php?f=50&t=6254

But i am not able to get installation screen it's always restart and boot on main screen motherboard welcome. Can you please see what i am doing wrong, i have attached my picture which is show on boot and restart. I have tried also smbios 13,2 but not success.

My motherboard is IPMTB-TK (Truckee) motherboard (X58) ( https://support.hp.com/us-en/document/c01901210 )

Processor: Intel® Core i7 CPU 920 @ 2.67GHz, 2668 Mhz, 4 Core(s), 8 Logical Processor(s)

GPU: AMD Radeon HD 5700 Series

RAM: 12 GB

BIOS Mode: Legacy

Thanks in advance

[MaLd0n]

[ref]theleoj1[/ref], u need check bios config, memory bit i think

[trenetics]

[ref]MaLd0n[/ref],

trenetics, extract tables with f4 key in clover boot screen files generated in Clover/Acpi/origin, post here

 

Here's the origin DSDT:

OriginDSDT.7z

 

Hope you can fix it so i can install

[theleoj1]

theleoj1, u need check bios config, memory bit i think

Actually am new to this, can you tell me where i can check memory bit?

[MaLd0n]

[ref]theleoj1[/ref], bios setup, u need check there

Added in 4 minutes 44 seconds:

[ref]trenetics[/ref], folder https://Olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip

dsdt DSDT.aml.zip

[NewbieHTosh]

Hi! I am trying to get it installed on a machine with these specs, but it is not working:

CPU: Intel Xeon x3430

MOBO: H55M P33 (Flashed from H55M SE32)

GPU: R9 285 <- This is what it shows up in the Graphic Injector info, however on WIndows it is a r9 380

RAM: 12GB

From BIOS, I just changed settings to disable VT-d and set AHCI. I played a bit with the settings of clover and BIOS to try tio at least install it on the SSD, but the furthest I got without the pc crashing was to the error "AppleSMusPCI::start failed to get acpi path for provider".

Can you help me? Thanks!

[skilltom1974]

dell Inspiron 15r 4420 8gigs ram 1600 ddr3 intel graohics 400 harddrive 599gigs

got high Sierra installed did all steps in forum post for dell Inspiron 15 r 5520 for 10.14 just used 10.13 image since my netgear a6150 only goes up to10.13 it won't boot after without usb after I did steps the usb keeps disconnecting

[MaLd0n]

[ref]NewbieHTosh[/ref], post one photo

Added in 26 seconds:

[ref]skilltom1974[/ref], post one photo

[NewbieHTosh]

Here you go, thanks for the help.

[MaLd0n]

[ref]NewbieHTosh[/ref], u try with other usb port?

[NewbieHTosh]

I did try with two different ports (1 front/1 back). However the front usb is part of a hub. Basically the motherboard only had 1 usb pin, but since the case has 4, I am using an internal extension: I have an extension attached to the USB pin on the motherboard, on this hub I have attached two usb cabled (2 USB 3.0, 2 USB 2.0 all of them are part of the case).

[MaLd0n]

[ref]NewbieHTosh[/ref], h55 have a several problems with usb

extract tables with F4 key in Clover boot screen, files generated in Clover/Acpi/origin, post here!

[NewbieHTosh]

I did press F4 and tried to open the usb on my macbook, how can I access that folder

----------------------------------------------

I managed to do it. Here is it: https://www.dropbox.com/s/eyygygea1jk022h/origin.rar?dl=0

[MaLd0n]

[ref]NewbieHTosh[/ref], try, replace full efi inside usb stick

EFI.zip

[NewbieHTosh]

It did install, now once I try to boot from SSD, after all the text loading it gets stuck on the apple loading. I have noticed that the whole loading proecss takes a lot of time as well.

=======================================

I left it loading and when I came back, the screen looked like this: https://imgur.com/a/4on6PMy

I could move the mouse but clicking would do nothing.

[trenetics]

trenetics, folder https://Olarila.com/files/Clover.Folder ... 00.300.zip

dsdt

DSDT.aml.zip

(57.81 KiB) Downloaded 2 times

 

 

[ref]MaLd0n[/ref], Now i can boot into installer with no problem but when i try to install to the NVMe the pc just shuts down, when it reached 12min remaining. ALSO i cannot erase the NVMe or restore it in Disk Utility. It just says unmounting drive and after 2 min the PC shut down similar to the install..

I can install Mojave on an normal SSD without any problem with the DSDT you made, it's only NVMe that's not usable the PC sees it as an internal drive, but the NVMe drive cannot be used for install or storage, and i even tried to format the NVMe inside Mojave after an install to SSD still no luck

When i look into PCI list the NVMe storage controller is not present? Maybe that's the problem check below screenshots:

Hackintool PCI list:

https://ibb.co/wW6vH4G

&

Systeminformation PCI list:

https://ibb.co/K7h9QVm

I have attached run_me file from an install on a normal SSD if it helps:

Send me test-iMac.zip

 

Thanks [ref]MaLd0n[/ref],

[MaLd0n]

[ref]trenetics[/ref], some nvme have a several problems with macos, the best is used ever samsung evo 970 or pro line

[sektor1952]

I am having difficulty booting an Olarila image on an hp elitebook folio 9470m, processor is an i5-3437U and Intel HD 4000 graphics. The issue I am having is that the video does not load right and the trackpad does not work. Any suggestions will be greatly appreciated.

I have tried both the Mojave and high sierra image and the result is the same it looks like I get a monochrome screen that is jogged to the right, when you are supposed to see the apple logo with the progress bar, so I can't see the install window completely and I am wondering if there is something I am missing?

Edited July 19, 2019 by Guest