Install MacOS with Vanilla Olarila Image, Step by Step

[esata]

Fiz todo o procedimento de instalação do High Sierra 10.13.6, enviei o "send me", recebi um "DSDT.aml", e agora?

[MaLd0n]

[ref]baumman[/ref], if u have a good install, good hackintosh, just updates

Added in 39 seconds:

[ref]eltondecerqueira[/ref], veja links úteis na minha assinatura

Added in 31 seconds:

[ref]saifulapm[/ref], old hardware, u need a correct smbios etc for install Mojave

Added in 28 seconds:

[ref]livefrommin[/ref], u try a config2.plist?

Added in 37 seconds:

[ref]esata[/ref], clover/acpi/patched

e fazer os últimos ajustes se preciso for

[saifulapm]

MaLd0n, I am using config2.plist. I am not expert. Can you please help where and how I will change smbois?

Thanks

Added in 4 minutes 33 seconds:

Also I am using Dell n4050 with SSD and 8GB Ram. macOS 10.14.5 will cause any problem for my configuration?? If yes, I which version will perfect for my laptop ?

[livefrommin]

[ref]MaLd0n[/ref], I've tried both of them, I've tried to fake 0x12345678, and still it stucks on end randomseed.

[Blacket]

Hi.

When I boot up, I will go through the following page and stop at the end line.

My laptop does not have a port USB2.0

Laptop : Asus Zenbook Pro UX501VW

Notice the uploaded file

 

IMG_0263.zip

[MaLd0n]

[ref]Blacket[/ref], u use a config2.plist?

[Blacket]

i

 

Yes

[osxi7]

Not sure if you can help but I lost my previous installs of High Sierra and had to re load via your image method in windows

to cut a long story. version High Sierra is on a non upgrade path build number 17g2208 and will not install Nvidia 970 drivers

is there a solution? or should I re install ? I have set the Mac version to 14.2 it was set to 12

do you have a raw image of a later build of high Sierra so I can re install ?

[MaLd0n]

[ref]osxi7[/ref], https://Olarila.com/files/Utils/nvidia-update.command.zip

[ronaldo]

Boa noite. Fiz a instalação do Monjave Olarila conforme o link "Installation/Post Installation Tutorial".

Tenho um notebook Asus Vivobook X510UR.

Após a instalação, fiz o boot pelo pendrive e carrega praticamente tudo certo, menos o mouse pad.

Após o procedimento "8- Replace Clover folder with Olarila Clover folder" agora sem o pendrive bootável, o mouse pad funciona mas não consigo efetuar o login. Há um travamento as vezes antes e depois do login também. Intermitente!

Trabalhei com essa pasta aqui: NOTEBOOKS CHIPSET SERIES SKYLAKE+ (SKYLAKE / KABYLAKE / COFFEELAKE)

Utilizei a ultima versão do clover: Clover_v2.4k_r4934

Consigo carrregar o sistema sem o pendrive utilizando as kexts VoodooPS2Controller.kext e VoodooTSCSync.kext, aqui funciona quase tudo, audio, video, bateria porém o trackpad não funciona.

Se trocar as kexts acima pelas VoodooI2C.kext, VoodooI2CHID.kext o sistema para no momento do login e as vezes depois conforme falei acima. Aqui o mouse pad funciona porém não consigo logar e não consigo utilizar o sistema.

Configurações:

Modelo: x510UR - BQ292T

CPU: i7 - 8550U

SSD: 500Gb

geforce 930mx

Placa Gráfica UHD Graphics 620

Gostaria que o mouse pad estivesse funcionando. Se alguém puder me ajudar.

Desde já agradeço o MaLd0n pela contribuição.

[robnav]

[ref]MaLd0n[/ref], [ref]MaLd0n[/ref], After having trouble on mojave to get acceleration on the UHD 630, I decided to give high sierra a try because I'm reading 630 works out the box. I am having trouble with the installation getting stuck at the apple logo. This is my clover folder. Please let me know if I missed something.

CLOVER.zip

[MaLd0n]

[ref]robnav[/ref], use Olarila image or our clover folder for ur chipset

[robnav]

[ref]MaLd0n[/ref], Ok i went and used the one for my chipset, coffee lake, and got this error.

[MaLd0n]

[ref]robnav[/ref], i think is a video problem

activate and done

[robnav]

[ref]MaLd0n[/ref], Im sorry I dont understand. what do you mean by activate and done?

[tux_linuxer]

Ola boa tarde.

Fiz todo procedimento para instalar essa ultima versão 10.14.5 e ao dar o boot fica congelado numa tela preta.

Alguem teria alguma dica?

Obrigado.

Mário

Bom dia.

Instalei o 10.14.4 e atualizei... rodou de boa

[luizorlandi]

Galera, bom dia !!

Está funcionando redondo aqui no meu Lenovo Yoga 510, ficou ótimo, porém queria tirar aquele boot em modo Verbose, tentei algumas vezes sem sucesso, a ideia é que entre direto apresentando a maçã... como eu faço isso, ele já inicia direto pelo disco, mas aparece ainda todas aquelas linhas do boot.

Abs !!

[MaLd0n]

[ref]luizorlandi[/ref], remova o -v

[Blacket]

Hello

I'm installing on Mac when booting from USB the following error is displayed

**************** ioconsoleusers gioscreenlockstate 3 hs 0 bs 0 now 0 sm 0x0 ************************

Tanks for helping me.

 

CLOVER.zip

[MaLd0n]

[ref]Blacket[/ref], u use config2.plist?

[Blacket]

u use config2.plist?

 

Yes

When I delete this files (Lilu.kext and WhateverGreen.kext)

The following error resolves but the black screen stays on

I think these two files have problem.

[michael626]

Hi Maldon

I use your instruction for my dell R820 with 4 processors E5-4620 and I got stuck during the installation :

can you help me?

[AppleBytes]

I am attempting to use the Olarila Yosemite USB image to install Yosemite on my Insprion 9400:

Core 2 duo @2.16Ghz

4GB RAM

g70 Geforce 7800 (256Mb)

But all I ever see is:

Welcome to Clover 4559
... testing hardware ...

If I touch the O key. The options do not look like the pictures in the instructions. I don't think Clover works on my hardware. I think it thinks I have a (U)EFI BIOS? I would really like to use your USB image. How can I make this work?

EDIT: I have downloaded the CLOVER.LGA775.zip. I then performed the following:

# sudo tar xvf ./CLOVER.LGA775.zip
# sudo rm -r ./_MACOSX/
# sudo tar cvf ../LGA775.tar .
# sudo mkdir /Volumes/EFI
# sudo mount_msdos /dev/disk1s1 /Volumes/EFI/
# sudo cp ../LGA775.zip /Volumes/EFI/
# cd /Volumes/EFI/
# sudo tar xvf ./LGA775.zip && sudo rm LGA775.zip
# sudo umount /Volumes/EFI/ && sudo diskutil eject /Volumes/Olarila\ Yosemite\ image

So. As I understand it. I needed to replace those files for my chipset, for the Olarila Yosemite USB image to work. But after rebooting to the USB stick. I am still stuck at the same message as above. But the Clover version is different. Can anyone please advise?

EDIT:

OK Clover will only work on systems that have a (U)EFI BIOS. But since I have a legacy BIOS I can't use the Olarila images. Because they all appear to use Clover.

Thank you for all your time, and consideration.

--Chris

Edited June 2, 2019 by Guest

[luizorlandi]

luizorlandi, remova o -v

 

Já fiz isso tantas vezes, devo estar esquecendo alguma coisa, pois continua no modo verbose, e ainda aparece o menu para vc dar o boot (mesmo sem o pendrive).

Added in 3 minutes 14 seconds:

Já fiz isso tantas vezes, devo estar esquecendo alguma coisa, pois continua no modo verbose, e ainda aparece o menu para vc dar o boot (mesmo sem o pendrive).

 

Corrigindo, não, não deu certo, tem de tirar todas as vezes, como salva isso ?!?!

...

Edited May 31, 2019 by Guest

[MaLd0n]

[ref]Blacket[/ref], if u remove weg and lilu u need try with -x for disable some drivers