Install MacOS with Vanilla Olarila Image, Step by Step

[woody4165]

Hi

I have a Toshiba laptop Portégé R30-A-1CD with a i5-4310M@2.70GHz and the iGPU is HD4600, Intel I217-LM as ethernet card and Intel 7260 as Wireless card

I'm trying to install Catalina, so I downloaded the Vanilla Olarila Image for Catalina

I've followed the instructions at first post of this thread and I was able to boot from the USB stick.
I'm using  EFI.Opencore.NoteBook.Haswell.zip for EFI.

What I did for post-install is:

• run "Olarila Repair app"
• Copy EFI folder to /Volumes/EFI from previous downloaded file
• a-Video Patch
• b- Embedded Controller Device - Catalina users check Name _HID "PNP0C09" in your DSDT and rename to EC via Clover/OpenCore Acpi rename. - if you using Olarila folders don't need rename
• 8- Install Clover Bootloader in SSD - *Mobos UEFI - you don't need install Clover, just paste Olarila folder for your Chipset into ESP/EFI partition and reboot! (since I use UEFI I haven't installed)
• * reboot

 

After reboot, without USB stick, I get the new boot menu, I choose the first item, but it reboots suddenly and reboots in recovery mode, as I have to install again MacOs.

 

What can I check?

Thanks

Edited October 29, 2021 by woody4165

[MaLd0n]

disable secure boot model and try

[woody4165]

Thanks for reply, secure boot was already disabled.
VT-d also was disabled

 

[firas1234]

hello admin my device is msi pe72 7rd

CPU : Intel Core i7-7700HQ

MOTHERBOARED : MSI MS-1799

GPU : Intel HD Graphics 630 (Kaby Lake-H GT2) [MSI] 

need efi file please and I attached screen shot from Hw info 

msi.rar

[MaLd0n]

5 minutes ago, firas1234 said:

hello admin my device is msi pe72 7rd

https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/

[SpecterGamerzOSX]

Hi Mald0n, I am new to this topic of mac os installation, but I really want to try this out.

But I am still worried about if it will support my computer or not, as my BIOS is Legacy, and there's no point changing it to UEFI, or the drive will crash.

Can anyone help me install macos Big Sur/Catalina/Mojave on my PC?

This is my computer's hardware info:

Motherboard: HP 83C5 (U3E1)

Motherboard Version: Inyside F.37

BIOS Mode: Legacy (UEFI unsupported)

SMBIOS Version: 3.0

Embedded Controller Version: 31.60

CPU: Intel Core i5 8250U @ 1.60GHz Kaby Lake-U/Y 14nm Technology

RAM: 8.00GB Single-Channel Unknown @ 1197MHz (17-17-17-39)

GRAPHICS: Generic PnP Monitor (1920x1080@60Hz) Intel UHD Graphics 620 (HP) 2047MB NVIDIA GeForce MX130 (HP) ForceWare version: 462.80 SLI Disabled

COMPANY: HP

AUDIO: Realtek High Definition Audio

 

Please help me and guide me completely detailed through the installation.

Thanks.

26 minutes ago, The MAC OS said:

Hi, I am new to this topic of mac os installation, but I really want to try this out.

But I am still worried about if it will support my computer or not, as my BIOS is Legacy, and there's no point changing it to UEFI, or the drive will crash.

Can anyone help me install macos Big Sur/Catalina/Mojave on my PC?

This is my computer's hardware info:

Motherboard: HP 83C5 (U3E1)

Motherboard Version: Inyside F.37

BIOS Mode: Legacy (UEFI unsupported)

SMBIOS Version: 3.0

Embedded Controller Version: 31.60

CPU: Intel Core i5 8250U @ 1.60GHz Kaby Lake-U/Y 14nm Technology

RAM: 8.00GB Single-Channel Unknown @ 1197MHz (17-17-17-39)

GRAPHICS: Generic PnP Monitor (1920x1080@60Hz) Intel UHD Graphics 620 (HP) 2047MB NVIDIA GeForce MX130 (HP) ForceWare version: 462.80 SLI Disabled

COMPANY: HP

AUDIO: Realtek High Definition Audio

 

Please help me and guide me completely detailed through the installation.

Thanks.

I also don't understand post installation.

 

Anyway, I have got olarilla big sur and all requirements ready.

26 minutes ago, The MAC OS said:

Hi, I am new to this topic of mac os installation, but I really want to try this out.

But I am still worried about if it will support my computer or not, as my BIOS is Legacy, and there's no point changing it to UEFI, or the drive will crash.

Can anyone help me install macos Big Sur/Catalina/Mojave on my PC?

This is my computer's hardware info:

Motherboard: HP 83C5 (U3E1)

Motherboard Version: Inyside F.37

BIOS Mode: Legacy (UEFI unsupported)

SMBIOS Version: 3.0

Embedded Controller Version: 31.60

CPU: Intel Core i5 8250U @ 1.60GHz Kaby Lake-U/Y 14nm Technology

RAM: 8.00GB Single-Channel Unknown @ 1197MHz (17-17-17-39)

GRAPHICS: Generic PnP Monitor (1920x1080@60Hz) Intel UHD Graphics 620 (HP) 2047MB NVIDIA GeForce MX130 (HP) ForceWare version: 462.80 SLI Disabled

COMPANY: HP

AUDIO: Realtek High Definition Audio

 

Please help me and guide me completely detailed through the installation.

Thanks.

I also don't understand post installation.

 

Anyway, I have got olarilla big sur and all requirements ready.

I need the guide for my pc

Hi, I am new to this topic of mac os installation, but I really want to try this out.

But I am still worried about if it will support my computer or not, as my BIOS is Legacy, and there's no point changing it to UEFI, or the drive will crash.

Can anyone help me install macos Big Sur/Catalina/Mojave on my PC?

This is my computer's hardware info:

Motherboard: HP 83C5 (U3E1)

Motherboard Version: Inyside F.37

BIOS Mode: Legacy (UEFI unsupported)

SMBIOS Version: 3.0

Embedded Controller Version: 31.60

CPU: Intel Core i5 8250U @ 1.60GHz Kaby Lake-U/Y 14nm Technology

RAM: 8.00GB Single-Channel Unknown @ 1197MHz (17-17-17-39)

GRAPHICS: Generic PnP Monitor (1920x1080@60Hz) Intel UHD Graphics 620 (HP) 2047MB NVIDIA GeForce MX130 (HP) ForceWare version: 462.80 SLI Disabled

COMPANY: HP

AUDIO: Realtek High Definition Audio

 

Please help me and guide me completely detailed through the installation.

Thanks.

 

Also, I have all the items ready. Er..I don't know the meaning of post installation

Edited November 17, 2021 by The MAC OS

[MaLd0n]

use olarila efi folder kabylake mobile

[NM H]

Hi MaLd0n

I have a pc with Dual Xeon E5 2680 v4, supermicro X10DAL-I-O, ram 32GB, Nvidia quadro P2200.

Can I install Big Sur? Please advise!

Thank you very much.

Edited November 27, 2021 by NM H

[MaLd0n]

8 hours ago, NM H said:

Hi MaLd0n

Just try

https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/

[NM H]

On 11/28/2021 at 4:07 AM, MaLd0n said:

Just try

https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/

Hi MaLd0n.

I can't boot to install. You can see sreenshot below. Please help me and advise!

https://ibb.co/L9R2npH

[MaLd0n]

10 hours ago, NM H said:

I can't boot to install. You can see sreenshot below. Please help me and advise!

u need use a correct folder for ur hardware

https://www.olarila.com/topic/20908-guide-easy-fast-and-perfect-hackintosh-vanilla-step-by-step-clover-and-opencore-bootloader/

 

[NM H]

58 minutes ago, MaLd0n said:

u need use a correct folder for ur hardware

https://www.olarila.com/topic/20908-guide-easy-fast-and-perfect-hackintosh-vanilla-step-by-step-clover-and-opencore-bootloader/

 

I used a folder Desktop CometLake, to boot for GA Z590 Gaming X, but still can't boot. Please help me.

 

[MaLd0n]

4 hours ago, NM H said:

I used a folder Desktop CometLake, to boot for GA Z590 Gaming X, but still can't boot. Please help me.

rocket lake

[NM H]

14 hours ago, MaLd0n said:

rocket lake

Hi,

I still can't boot. it notice that "not supported this platform". Please advise!

[MaLd0n]

use bigsur or monterey

[NM H]

On 12/1/2021 at 8:42 PM, MaLd0n said:

use bigsur or monterey

Thank you very much. I finished installing Big Sur.

Please help me patch DSDT that required in the topic DSDT request.

Thank you very much again.

[Robson_muniz]

On 1/28/2019 at 10:03 AM, MaLd0n said:

Donation with Paypal https://tinyurl.com/r7fchn9

Donation with Binance 0xdbe48ef6b158f1dd0035d7f49555c99e52f72714

Donation with Stripe https://tinyurl.com/2ssnydn6

Donation with BuyMeaCoffee https://tinyurl.com/bvsbpf6e

Donation with BTC 33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3

Donation with PicPay @danielnmaldonado

Donation with PiX @danielnmaldonado@gmail.com

Donation with Mercado Livre https://tinyurl.com/y9evkj5u

 

Check our tutorial, How to create a personal installer with MacOS

https://tinyurl.com/y9pvz6ta

 

-OpenCore Vanilla Guide-

https://tinyurl.com/ycvcnp8h

 

- Useful Links -
https://tinyurl.com/43t5m6d4

 

Hello ppl, let's start

 

*AMD users check here*

https://tinyurl.com/2lxno548

 

1- Download Vanilla Olarila Image or Create your personal Vanilla USB Stick

https://tinyurl.com/1o7dx4nz

 

*After Download, extract image

2- Formatting USB Stick

3- Burn Olarila Image

a-MacOS / Windows / Linux with Etcher

*** Download Etcher | Use version from link below ***

https://tinyurl.com/352frf47

 

*Open app and select extracted Image

*Select USB Stick(use 16gb USB stick)

*Burn Image

b-Burn Olarila image on Windows with Win32DiskImager

*Download Win32DiskImager

https://tinyurl.com/472mseat

Format USB Stick

Open Win 32 Disk Imager

Load Olarila Image

Burn

 

4- Boot from USB

*Use boot key(Gigabyte is F12, Asus is F8, etc)

*Select Boot MacOS Install from Olarila Image

*Notebooks users, if default config.plist fail use config2.plist, press O key in Clover boot screen, go to Configs

*Select config2.plist

 

5- Formatting SSD

*Go to Disk Utility, "View"

*Select "Show All Devices"

*Format SSD, use APFS, GUID and go to installation

*After installation, boot from USB stick again, use boot key and select your SSD with system installed

 

6- Start a Post Installation

*Go to Olarila Image/Files folder and run "Olarila Repair app"

if u like File Vault, don't run it

https://tinyurl.com/sbgelrce

 

7- Copy Olarila EFI folder to EFI partition

*Download EFI folder for your Chipset

https://tinyurl.com/dwrtbp8r

 

*Copy EFI folder to /Volumes/EFI (don't reboot)

a-Video Patch

https://tinyurl.com/3dmg2thu

 

b- Embedded Controller Device

Catalina users check Name _HID "PNP0C09" in your DSDT and rename to EC via Clover/OpenCore Acpi rename.

if you using Olarila folders don't need rename

 

8- Install Clover Bootloader in SSD

https://tinyurl.com/ubyaea2

*Mobos UEFI - you don't need install Clover, just paste Olarila folder for your Chipset into ESP/EFI partition and reboot!

*Mobos Bios - after paste Olarila folder into EFI partition, install Clover with this options bellow!

*Reboot

 

9- Fine Tune, DSDT

 

*Go to topic "DSDT patch requests" and read instructions, post your files there

https://tinyurl.com/5dfv6t4q

 

*Paste edited DSDT.aml in CLOVER/ACPI/PATCHED or OC/ACPI folder

*Reboot

-Olarila common patches for one perfect Hackintosh

 

--Useful Links--

https://tinyurl.com/8dnvqs5u

 

-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!

 

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community and many, many, many others!

 

We're all here to have fun and learn from each other!

Pessoal fiz tudo como indicado acima funcionou, Olarila está de parabenes, tenho 2 ssds: um com Big Sur e outro com Monterey.
 No entanto me deparei com um problema:
Pendrive são lidos normalmente em qualquer porta USB, no entanto o mesmo não é verdade para meu HD externo Toshiba, que funcionan bem na TV e no meu PC com WIndows...
 Como consertar isto???

[MaLd0n]

3 minutes ago, Robson_muniz said:

 Como consertar isto???

https://www.olarila.com/topic/14220-hackintosh-usb-port-mapping-guide-2021-mojave-catalina-bigsur-monterey/

[firas1234]

hello admin my device is msi pe72 7rd

CPU : Intel Core i7-7700HQ

MOTHERBOARED : MSI MS-1799

GPU : Intel HD Graphics 630 (Kaby Lake-H GT2) [MSI] 

need efi file please and I attached screen shot from Hw info 

msi.rar

[MaLd0n]

6 minutes ago, firas1234 said:

CPU : Intel Core i7-7700HQ

efi for notebook kabylake

https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/