Install MacOS with Vanilla Olarila Image, Step by Step

[MaLd0n]

1 hour ago, cm0270 said:

Any ideas on how to get past this?

no idea

[cm0270]

31 minutes ago, MaLd0n said:

!no idea

Ok so got Mojave 10.14.1 installed finally. I have not been able to use F4 to extract files in Clover for some reason. Used DPCIManager to extract the DSDT which is attached along with the Runme.app.

 

My laptop is dual HDD with NVMe and Sata SSD. Mojave is installed to the SATA SSD. The only way I can see the SSD is when I use the Mojave boot disc. It doesn't show up in the options when I choose F11 to choose boot disc.

The laptop has an Nvidia 1650 Max-Q installed in it along with Intel HD 630.

How can I get the Nvidia disabled and get this to boot up without USB drive?

Thanks.

DSDT.aml.zip Send me Brads-iMac.zip

[MaLd0n]

41 minutes ago, cm0270 said:

Ok so got Mojave 10.14.1

u need use Olarila folder, reboot and extract send_me

with this folder have many clover patches, renames, etc

[cm0270]

11 hours ago, MaLd0n said:

u need use Olarila folder, reboot and extract send_me

with this folder have many clover patches, renames, etc

Olarila folder? Must be confused.

[MaLd0n]

14 minutes ago, cm0270 said:

Olarila folder? Must be confused.

yes, is a correct and clean config for use with my full dsdt patch

[cm0270]

Finally managed to get Mojave installed and was able to dump the DSDT files this time. Attached are DSDT files and Runme results. 

 

Right now running Mojave 10.14.1. Have not managed to get it to boot without USB drive.  

Right now this is what is working:

Ethernet with AtherosE2200Ethernet-V2.2.2 kext file.

Sound.

Battery indicator shows up.

 

The only way I was able to even to get any type of install was with using the Niresh Mojave usb. I could not even get it to do anything with the Olarila image at all.

But for odd reason I cannot even get the boot drive to show up at all when I hit F11 on startup to choose boot device. The only way I can see the boot drive is when I use the USB Installer. It is a Kingston NVMe drive. I even get the same results with my Samsung 860 Evo SATA SSD. I don't see any of the devices at the F11 screen when I boot up. All I see is the USB drive and UEFI: PXE IP4 Realtek PCIe GBE Family Controller and UEFI: PXE IP6 Realtek PCIe GBE Family Controller.

The system is being booted up with bios set to UEFI with CSM.

 

I found a Github link that had files for EFI from someone who was trying to get install done but no luck. At least I got install done and was able to copy the EFI folder over and add my DSDT files in place of it. This is what allowed the sound to work along with the battery percentage.

 

I have no idea what is going and why this thing won't boot without USB and why it won't see the drives when I choose F11.

DSDT Archive.zip Send me Brads-iMac.zip

[cm0270]

EFI Folder attached here.

https://filebin.net/2k7ub1opm7lvbgzu/EFI.zip?t=cv1jzj6x

[cm0270]

As for the F11 thing I can see all HDD (NVMe and SATA SSD) if I choose Legacy mode in BIOS, but that doesn't seem to do me any good when it is setup to boot UEFI mode or UEFI with CSM. 

 

Would I likely have to setup Clover to Legacy mode vs UEFI mode?

[pw44]

Hi MaLd0n

Hi, so far, i have it almost perfect running on my HP notebook.

 

Volume FN keys working..... but FN brightness controls does not, and also FN network on/off (F12)

 

HDMI is working for video, but no sound on it. 

 

How to make those work? Could not find...

[MaLd0n]

5 hours ago, pw44 said:

FN brightness

https://www.olarila.com/topic/5722-guide-brightness-hotkey-remapping/

[cm0270]

Ok managed to get Catalina 10.15.3 installed. What a pain it was too. It boots up without USB attached using Legacy mode on my BIOS. I have to enter BIOS and choose Legacy mode to boot to it. Then when I want to use Windows 10 on the other drive (NVMe) I have to choose UEFI with CSM. This is fine with me. Figure the only way to get it working.

Problem: When booting in Legacy into Catalina 10.15.3 it gets to the Clover screen and I choose the HDD (Samsung 1tb 860 Evo SSD) and hit enter. It goes through the verbose screen then goes to black screen for at least 3-4 minutes with nothing. If I just enter my password on the keyboard and hit enter and give it a minute then Catalina comes up or after hitting keys on keyboard after a few minutes. Not sure why it does that.

Graphics is showing as Intel HD Graphics CFL CRB 1536 MB when the graphics are Intel HD 630. I have gone into the config.plist and made the supposedly necessary changes needed. 

ACPI Tab:

GFX0 to iGPU: Find: 47465830 Replace: 49475055

HECI to IMEI: Find: 48454349 Replace: 494D4549

Boot Tab:

nv_disable=1 - checked

-disablegfxfirmware - checked

Devices Tab:

IntelGFX listed as 0x059168086

Graphics tab:

Inject Intel - checked

ig-platform-id:  0x59120000

 

Attached are files including DSDT dump, Runme app results and copy of EFI folder.

SendMe Runme app results:

https://filebin.net/ps1skyo0yhdrgp99/Send_me_Brads-iMac.zip?t=o92nr76l

EFI Folder

https://filebin.net/ps1skyo0yhdrgp99/EFI.zip?t=ma3r8mqm

DSDT Files:

Archive.zip

 

 

Edited February 25, 2020 by cm0270

[MaLd0n]

31 minutes ago, cm0270 said:

Ok managed to get Catalina 10.15.3

DSDT.aml.zip

use olarila folder and apply a video patch if need

[cm0270]

16 hours ago, MaLd0n said:

DSDT.aml.zip 41.81 kB · 3 downloads

use olarila folder and apply a video patch if need

My device id for my graphics is PCI\VEN_8086&DEV_3E9B&SUBSYS_127E1462&REV_00

 

I first went into the config file and put in 3E9B0009 for the graphics id platform and removed it from the fake id settings. Rebooted and the verbose and apple logo came up and went into the OS right away. Graphics still was showing the same thing {Intel HD Graphics CFL CRB 1536MB) so I went and changed it to 3E9B0006 ad rebooted and it went to verbose and then black screen for about 3 minutes before coming up to the login prompt. So I changed it back to the 3E9B0009 and rebooted and instead of verbose and apple logo and quick login to OS it went to verbose and then black screen for 3 minutes before it got to login prompt and still shows the intel HD Graphic CFL CRB 1536mb.

 

What do you mean use Olarila folder? Which folder? And how do I do the patch if needed?

Also when I go into System information and choose Graphics Display it shows no adapters. Doesn't show the Intel HD or the Nvidia 1650 graphics. And this is all after placing the DSDT.aml you uploaded into the ACPI/Patched folder in EFI.

Thanks

[cm0270]

4 hours ago, cm0270 said:

My device id for my graphics is PCI\VEN_8086&DEV_3E9B&SUBSYS_127E1462&REV_00

 

I first went into the config file and put in 3E9B0009 for the graphics id platform and removed it from the fake id settings. Rebooted and the verbose and apple logo came up and went into the OS right away. Graphics still was showing the same thing {Intel HD Graphics CFL CRB 1536MB) so I went and changed it to 3E9B0006 ad rebooted and it went to verbose and then black screen for about 3 minutes before coming up to the login prompt. So I changed it back to the 3E9B0009 and rebooted and instead of verbose and apple logo and quick login to OS it went to verbose and then black screen for 3 minutes before it got to login prompt and still shows the intel HD Graphic CFL CRB 1536mb.

 

What do you mean use Olarila folder? Which folder? And how do I do the patch if needed?

Also when I go into System information and choose Graphics Display it shows no adapters. Doesn't show the Intel HD or the Nvidia 1650 graphics. And this is all after placing the DSDT.aml you uploaded into the ACPI/Patched folder in EFI.

Thanks

Bootlog attached also.

What is working:

Audio

Ethernet

Camera (using Function + F6 keys)

Facetime (Through Ethernet until wifi card arrives)

iMessage (Through Ethernet until wifi card arrives)

All USB ports seem to be working fine. They are listed using Hackintool as: HS02 (USB 3.2 Gen 1 Type-C), HS03 (USB 3.2 (Gen 1 Type-A), HS04 (USB 3.2 (Gen 1 Type-A), HS05 (USB 3.2 Gen 1 Type-A). Don't think full speeds are there though but not really sure that is an issue either. Would be nice to have full speed on them.

 Brightness functions in Display settings works fine. Can't figure out how to work them with keyboard though.

Not working:

Intel HD 630 Graphics. Doesn't show up in System Information and listed as Intel HD 630 CFL CRB 1536 MB. Graphics seems to work fine. No lag noticed. Youtube videos play fine with no lag.

 

Still get the black screen which takes about 3-4 minutes to get past once it passes the verbose screen. Can't figure out how to get rid of that.

Also need to why the Intel HD 630 doesn't show up in the System Information and need to verify if the Nvidia 1650 is disabled or not.

 

Bootlog attached.

MSI GF63 Thin 9SC-257 Bootlog.zipBootlog attached.

 

Edited February 26, 2020 by cm0270

[Monte0123]

I install Mojave on my dell laptop. It boots and loads up fine. However, I do not know how to install the WiFi Kext. I use the file inside the olarila folder but nothing changes. What do I do? 

[MaLd0n]

45 minutes ago, iFlightStar said:

I install Mojave on my dell laptop. It boots and loads up fine. However, I do not know how to install the WiFi Kext. I use the file inside the olarila folder but nothing changes. What do I do? 

Olarila folder is a basic good config, u need start a finetune, some drivers, dsdt, etc

[Monte0123]

5 hours ago, MaLd0n said:

Olarila folder is a basic good config, u need start a finetune, some drivers, dsdt, etc

Where would I get the kexts  from? I looked around and I cannot find anything that works. 

[Monte0123]

19 minutes ago, iFlightStar said:

Where would I get the kexts  from? I looked around and I cannot find anything that works. 

Also the fine tune is the dsdt thing? I’m kinda a noob sorry for the dumb questions.

[MaLd0n]

9 minutes ago, iFlightStar said:

Also the fine tune is the dsdt thing? I’m kinda a noob sorry for the dumb questions.

yes, the best and clean way ever

[Monte0123]

45 minutes ago, MaLd0n said:

yes, the best and clean way ever

Okay, I appreciate this man, I got the sound working but not the wifi?weird. Im just waiting for that file. I would like to know more about these things.

 

[MaLd0n]

7 minutes ago, iFlightStar said:

Okay, I appreciate this man, I got the sound working but not the wifi?weird. Im just waiting for that file. I would like to know more about these things.

what wifi card u have?

[Monte0123]

3 minutes ago, MaLd0n said:

what wifi card u have?

I believe AC3160.

[Guest Pollen]

Ola, I'm trying to install catalina for many days now tried everywhere read a lot of different posts
I want use and stay and donate to Olarila

using Olarila files and procedure and I got so far as the reboot to 2d part of install and it reboots at 10mn left

Have tried reinstall, different drive, different bios settings. is there any specific bios settings besides the regular clover settings ?

ECO  TO  EC enabled in config
What am I missing
This is the best

- Asus X299 prime deluxe bios 1503
- i97980XE
- Asus Nvidia GT170 (native support ?) wait to have catalina to install RX 5700 XT

Gracias

[Pollen]

Should I try to install Morave first and then move to Catalina?

Thanks

This is me  with the X299 reboot problem

Edited February 29, 2020 by Pollen

[MaLd0n]

6 hours ago, iFlightStar said:

I believe AC3160.

broadcom?

 

22 minutes ago, Pollen said:

This is me  with the X299 reboot problem

x299 in catalina need check a good bios config