Install MacOS with Vanilla Olarila Image, Step by Step

[MaLd0n]

[ref]djuby[/ref], for native usb u need remove usbinjectall.kext and follow instructions from my topic

for test block kext at boot

https://Olarila.com/forum/viewtopic.php?f=28&t=9317

[djuby]

djuby, for native usb u need remove usbinjectall.kext and follow instructions from my topic

for test block kext at boot

viewtopic.php?f=28&t=9317

 

Great . Works perfect when I disable usbinjectall.kext. Now I guess I should remove the kext, right?

[djuby]

Hi [ref]MaLd0n[/ref],

Just started a new project - trying to install High Sierra on DELL Latitude E6420. Here are the specs:

Chipset: Sandy Bridge

CPU: Mobile DualCore Intel Core i5-2540M, 3100 MHz

RAM: 16GB DDR3

Video: Intel HD3000, NVIDIA NVS 4200M (512 MB)

After creating the Olarila High Sierra USB installer and trying to boot with config2.plist (as per the guide for notebooks) i get a kernel panic. See the screenshots. What can be the problem? Can you please help.

Djuby

Screenshots.zip

[nithinxjohnson]

@MaLd0n

I already have latest version of whatevergreen kext . It would be helpful if you could tell me the steps to enable Intel HD graphics. Does it require any additional steps. One last question should I have to use shiki kext to get Intel quicksync support in my mackintosh.

Thank in advance!!!

[MaLd0n]

[ref]djuby[/ref], u use a usb2 port?

send me ur efi folder with tables in origin folder

Added in 47 seconds:

[ref]nithinxjohnson[/ref], no, whatevergreen work on it now

[nithinxjohnson]

@MaLd0n

That means I require only to have the latest version of whatevergreen.kext and no additional modifications to get us 630 7mb problem to get fixed & to have the ability to use Intel quicksync. I am actually confused that's why I am asking two question one to get full acceleration on uhd 630 & enabling Intel quicksync.

Thanks in advance

[djuby]

djuby, u use a usb2 port?

send me ur efi folder with tables in origin folder

 

Yes, I use USB2 port.

EFI.zip

[MaLd0n]

[ref]djuby[/ref], check if work

EFI.zip

[djuby]

djuby, check if work

 

Better, but it gets stuck. Check the screenshot.

Screenshot.jpg.zip

[MaLd0n]

[ref]djuby[/ref], this config in some cases have a problem with edid, connect one external monitor via hdmi and check

DSDT.aml.zip

[djuby]

djuby, this config in some cases have a problem with edid, connect one external monitor via hdmi and check

 

Tried external monitor on the HDMI - still stuck on the same place. Does it try to use the Intel HD or NVIDIA graphics? Can we use Intel HD only?

[MaLd0n]

[ref]djuby[/ref], if is a optimus use -wegnoegpu bootarg

[djuby]

djuby, if is a optimus use -wegnoegpu bootarg

 

Yes, it is Optimus. I tried the -wegnoegpu booting but it is still stuck. Check the screenshot.

Screenshot.jpg.zip

[MaLd0n]

[ref]djuby[/ref], have a inject kexts problem

try with last clover version

http://s000.tinyupload.com/index.php?file_id=38878839337152490678

[nithinxjohnson]

MaLd0n

That means I require only to have the latest version of whatevergreen.kext and no additional modifications to get us 630 7mb problem to get fixed & to have the ability to use Intel quicksync. I am actually confused that's why I am asking two question one to get full acceleration on uhd 630 & enabling Intel quicksync.

Thanks in advance

@MaLd0n

Any help...

[MaLd0n]

[ref]nithinxjohnson[/ref], with only igpu u just need enable graphics with hackintool

[nithinxjohnson]

@MaLd0n

So intel quick sync cannot be enabled if I am using a discrete and graphics card.

[MaLd0n]

[ref]nithinxjohnson[/ref], post one send_me here

[djuby]

djuby, have a inject kexts problem

try with last clover version

http://s000.tinyupload.com/index.php?fi ... 7152490678

 

OK. I'll try it and will let you know.

[nithinxjohnson]

@MaLd0n

I am attaching the send me file for my mackintosh build with nvidia gtx 1050 4gb graphics card.

Send me_new.zip

[MaLd0n]

[ref]nithinxjohnson[/ref], Arquivo Comprimido.zip

enable IntelHDGraphics

[Guest]

Hey,

I’m trying to Install Mojave on my laptop, I booted from the Installer USB and selected Config_Plist.2 and I’m stuck on this screen for the last 10 minutes. Please guide and help.

Machine Specs:

Machine: Lenovo Yoga 510.

Model Number: 14ISK (Touch)

Motherboard: Uhh Don’t know.

CPU: Intel Core i5 6200U.

GPU: Intel HD Graphics 520.

Ram: 8GB DDR4, Corsair.

SSD 1: 240 GB (ADATA)

SSD 2 (External/Target): 128 GB M2 (Kingston)

Installation USB:

Source of Image: Olarlia Forum, Mojave Image.

Made Via: Ethner macOS (VirtualBox)

Problem Description:

Stuck at AppleGraphicsDisplayPolicy..

Thank You!

[MaLd0n]

[ref]vikesyy[/ref], use default config.plist

[Guest]

@maLd0n The boot process still gets stuck at AppleGraphicsDevice Policy.

Com.apple.bsd.dirhelper.556 (Warning): Endpoint has been activated through legacy launch(3) API’s

Com.ntp.sntop.188 (Warning): Service exited with abnormal code.

Com.apple.displaypolicyd.200 .......

Kextstall...

[MaLd0n]

[ref]vikesyy[/ref], update clover

https://github.com/CloverHackyColor/CloverBootloader/releases