theleoj1 Posted July 18, 2019 Posted July 18, 2019 theleoj1, u need check bios config, memory bit i think Actually am new to this, can you tell me where i can check memory bit?
Administrators MaLd0n Posted July 18, 2019 Author Administrators Posted July 18, 2019 [ref]theleoj1[/ref], bios setup, u need check there Added in 4 minutes 44 seconds: [ref]trenetics[/ref], folder https://Olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip dsdt DSDT.aml.zip -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
NewbieHTosh Posted July 18, 2019 Posted July 18, 2019 Hi! I am trying to get it installed on a machine with these specs, but it is not working: CPU: Intel Xeon x3430 MOBO: H55M P33 (Flashed from H55M SE32) GPU: R9 285 <- This is what it shows up in the Graphic Injector info, however on WIndows it is a r9 380 RAM: 12GB From BIOS, I just changed settings to disable VT-d and set AHCI. I played a bit with the settings of clover and BIOS to try tio at least install it on the SSD, but the furthest I got without the pc crashing was to the error "AppleSMusPCI::start failed to get acpi path for provider". Can you help me? Thanks!
skilltom1974 Posted July 18, 2019 Posted July 18, 2019 dell Inspiron 15r 4420 8gigs ram 1600 ddr3 intel graohics 400 harddrive 599gigs got high Sierra installed did all steps in forum post for dell Inspiron 15 r 5520 for 10.14 just used 10.13 image since my netgear a6150 only goes up to10.13 it won't boot after without usb after I did steps the usb keeps disconnecting
Administrators MaLd0n Posted July 18, 2019 Author Administrators Posted July 18, 2019 [ref]NewbieHTosh[/ref], post one photo Added in 26 seconds: [ref]skilltom1974[/ref], post one photo -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Administrators MaLd0n Posted July 18, 2019 Author Administrators Posted July 18, 2019 [ref]NewbieHTosh[/ref], u try with other usb port? -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
NewbieHTosh Posted July 18, 2019 Posted July 18, 2019 I did try with two different ports (1 front/1 back). However the front usb is part of a hub. Basically the motherboard only had 1 usb pin, but since the case has 4, I am using an internal extension: I have an extension attached to the USB pin on the motherboard, on this hub I have attached two usb cabled (2 USB 3.0, 2 USB 2.0 all of them are part of the case).
Administrators MaLd0n Posted July 18, 2019 Author Administrators Posted July 18, 2019 [ref]NewbieHTosh[/ref], h55 have a several problems with usb extract tables with F4 key in Clover boot screen, files generated in Clover/Acpi/origin, post here! -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
NewbieHTosh Posted July 18, 2019 Posted July 18, 2019 I did press F4 and tried to open the usb on my macbook, how can I access that folder ---------------------------------------------- I managed to do it. Here is it: https://www.dropbox.com/s/eyygygea1jk022h/origin.rar?dl=0
Administrators MaLd0n Posted July 19, 2019 Author Administrators Posted July 19, 2019 [ref]NewbieHTosh[/ref], try, replace full efi inside usb stick EFI.zip -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
NewbieHTosh Posted July 19, 2019 Posted July 19, 2019 It did install, now once I try to boot from SSD, after all the text loading it gets stuck on the apple loading. I have noticed that the whole loading proecss takes a lot of time as well. ======================================= I left it loading and when I came back, the screen looked like this: https://imgur.com/a/4on6PMy I could move the mouse but clicking would do nothing.
trenetics Posted July 19, 2019 Posted July 19, 2019 trenetics, folder https://Olarila.com/files/Clover.Folder ... 00.300.zip dsdt DSDT.aml.zip (57.81 KiB) Downloaded 2 times [ref]MaLd0n[/ref], Now i can boot into installer with no problem but when i try to install to the NVMe the pc just shuts down, when it reached 12min remaining. ALSO i cannot erase the NVMe or restore it in Disk Utility. It just says unmounting drive and after 2 min the PC shut down similar to the install.. I can install Mojave on an normal SSD without any problem with the DSDT you made, it's only NVMe that's not usable the PC sees it as an internal drive, but the NVMe drive cannot be used for install or storage, and i even tried to format the NVMe inside Mojave after an install to SSD still no luck When i look into PCI list the NVMe storage controller is not present? Maybe that's the problem check below screenshots: Hackintool PCI list: https://ibb.co/wW6vH4G & Systeminformation PCI list: https://ibb.co/K7h9QVm I have attached run_me file from an install on a normal SSD if it helps: Send me test-iMac.zip Thanks [ref]MaLd0n[/ref],
Administrators MaLd0n Posted July 19, 2019 Author Administrators Posted July 19, 2019 [ref]trenetics[/ref], some nvme have a several problems with macos, the best is used ever samsung evo 970 or pro line -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
sektor1952 Posted July 19, 2019 Posted July 19, 2019 (edited) I am having difficulty booting an Olarila image on an hp elitebook folio 9470m, processor is an i5-3437U and Intel HD 4000 graphics. The issue I am having is that the video does not load right and the trackpad does not work. Any suggestions will be greatly appreciated. I have tried both the Mojave and high sierra image and the result is the same it looks like I get a monochrome screen that is jogged to the right, when you are supposed to see the apple logo with the progress bar, so I can't see the install window completely and I am wondering if there is something I am missing? Edited July 19, 2019 by Guest
NewbieHTosh Posted July 19, 2019 Posted July 19, 2019 Any ideas on how to solve the red screen error I posted earlier?
Administrators MaLd0n Posted July 19, 2019 Author Administrators Posted July 19, 2019 [ref]NewbieHTosh[/ref], no idea, try other output -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
brunoyagamii2 Posted July 19, 2019 Posted July 19, 2019 (edited) O meu deu esse erro ai, alguém me ajuda? ALGUÉM ME AJUDA AI. Galeria das imagens apresentadas no meu problema. --- > https://imgur.com/gallery/ttcTO53 Edited July 19, 2019 by Guest
Administrators MaLd0n Posted July 19, 2019 Author Administrators Posted July 19, 2019 [ref]brunoyagamii2[/ref], use o config2.plist -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
NewbieHTosh Posted July 19, 2019 Posted July 19, 2019 Here are some text from the loading screen: https://imgur.com/a/J1jCkb2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now