Install MacOS with Vanilla Olarila Image, Step by Step

[nexusakachus]

u try a other profile?

tried macmini 8,1 , and imac 17,1 ; 18,1 and 18,2

Added in 1 minute 47 seconds:

imac 18,3 or imac pro 1,1 are the best as they are for coffeelake cpu

will try tonight with those

thanks !

edit: before trying i may say that before searching on everymac.com i see that imac pro 1,1 has skylake Xeon processors and imac 18,3 has kaby lake i5 and i7

and i may say no integrated graphics in those models , just dedicated radeon

the only one with coffee lake cpu is macmini 8,1

intel uhd 630 is only on macmini 8,1 and imac 18,1 + 18,2 apple computers

am I wrong?

Edited March 9, 2019 by Guest

[MaLd0n]

tried macmini 8,1 , and imac 17,1 ; 18,1 and 18,2

Monitor profile

[nexusakachus]

Added in 4 minutes 9 seconds:

thanks

this?

i tried all . no luck

[MaLd0n]

Added in 4 minutes 9 seconds:

take one shot without whatevergreen kext, if work i add patches into dsdt

[nexusakachus]

take one shot without whatevergreen kext, if work i add patches into dsdt

ok

tried with no whatevergreen >>>>> same RGB issue: pink screen

BTW I noticed that I have this kexts in library/extensions and efi/clover/kexts/other

there are duplicates

should i delete duplicates?

which folders should i use?

thanks

[cm0270]

Any idea why the Olarila image is giving USB not enough sufficient power for the ports on trying to install? Boot up the USB and choose the Olarila install and keep getting that error. I have tried another image from another source and works perfectly fine. I don't know why all of a sudden the Olarila image is giving that issue. I have tried with USB 2.0 and USB 3.0 drives and tried every port on my laptop. I have also tried the High Sierra image and same thing. I have managed to get the Mojave 10.14.3 image installed before and had to redo it because my HDD went out and replaced it.

I just don't understand what is causing this problem all of a sudden. if I use images from another site it seems to work perfectly fine, but when I try any of the Olarila images again... same issue.

 

[MaLd0n]

same issue.

u need use a usb 2 port

Added in 38 seconds:

ok

u dont need kexts fakepciid and intelhd injector

[nexusakachus]

u dont need kexts fakepciid and intelhd injector

 

delete these?

[MaLd0n]

delete these?

check Olarila clover folder for chipset serie 100/200/300

https://Olarila.com/forum/viewtopic.php?f=81&t=6771

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

[arielga96]

I want to install hackintosh in hp-bs022la https://www.hponline.com.ar/p/notebook-hp-15-bs022la-jt9ao4

, but when wanting to start the installation it does not work config.plist and config2.plist, if or if I have to run it in video compatibility mode

[erroruser]

I want to install hackintosh in hp-bs022la https://www.hponline.com.ar/p/notebook-hp-15-bs022la-jt9ao4

, but when wanting to start the installation it does not work config.plist and config2.plist, if or if I have to run it in video compatibility mode

make sure your bios is current as some need it to be an make sure you adjust you bios as some setting need changing with some of these

Load Optimized Defaults

If your CPU supports VT-d, disable it

If your system has CFG-Lock, disable it

If your system has Secure Boot Mode, disable it

Set OS Type to Other OS

If your system has IO SerialPort, disable it

Set XHCI Handoff to Enabled

also som hp laptops have hidden advance setting select f10+A but press A immediately after pressing f10 use 2 hands to select as it changes fast

[MaLd0n]

hp-bs022la

u need post one photo in error screen

[cm0270]

Managed to get the Olarila 10.14.3 installed again. The Intel HD4600 seems to be working and listed as 2048mb.

Still can't get the USB issues straightened out in Mojave. It still won't read USB drives inside of Mojave.

Also trying to get the Wifi/Bluetooth card working. Wifi is working and seems to be working fine with 5ghz, but can't get the bluetooth to work or handoff, etc. This is the card I have installed:

Wireless-AC Dual band Half Mini PCI-E Wifi Network Card For AzureWave AW-CE123H Broadcom BCM94352HMB,IEEE 802.11ac, 867Mbps 2.4G/5Ghz WLAN+Bluetooth BT 4.0 For Laptop Notebook

I have installed the following kexts into Library/Extensions, but don't see any reference to the bluetooth, etc in the config.plist:

BrcmBluetoothInjector.kext

BrcmNonPatchRAM2.kext

FakePCIID_Broadcom_Wifi.kext

FakePCIID_XHCIMux.kext

FakePCIID.kext

Attached is a current copy of my config.plist as well.

config.plist.zip

[MaLd0n]

Managed to get the Olarila 10.14.3

https://bitbucket.org/RehabMan/os-x-brcmpatchram

https://Olarila.com/forum/viewtopic.php?p=65287#p65287

[cm0270]

I don't see any of my devices on this list. I watched the video but none of my devices show up on it like it does in the video.

Could not attach IOREG file. said it was too big. 5.4mb in size.

 

[MaLd0n]

[ref]cm0270[/ref], u need solve usb 2 ports first with usb 2 devices

[nitozinho]

Olá pessoal, desta vez estou a tentar instalar o Mojave Olarila no meu portatil...

specs:

Packard Bell EasyNote TK85-GO-132

Processor - Intel Core i5 430M

Chipset - Intel HM55

RAM - 4GB DDR3

...mas quando vai começar a instalação aparece que não pode ser instalado, algumas sugestões:

[MaLd0n]

[ref]nitozinho[/ref], hardware antigo pro Mojave, o smbios já perdeu o suporte, vc tem de usar um smbios que funcione no mojave

[nitozinho]

Obrigado mais uma vez pela rápida resposta.

[cm0270]

cm0270, u need solve usb 2 ports first with usb 2 devices

 

Thing is when I plug any USB 2 device in it doesn't recognize it. Keeps giving me the port needs power. The Logitech usb receiver for my mouse and keyboard work fine, but it doesn't show up on that list at all in the IOREG which is strange. I have moved it to different ports with no change. I even plugged in a portable HDD but they are all usb 3. lol.

My usb mouse and keyboard combo work on the USB 3.0 ports which are, according to IOREG, HS01 and HS02, which showed up as I plugged it from one to another. But yet if I plug a USB 3.0 thumbdrive, external HDD, etc into the USB 3.0 ports I get the "Connect External US 3.0 to a USB port on this Mac" error. And if I have the USB receiver for mouse and keyboard plugged into one of the USB 3.0 ports and plug something else into the other 3.0 port it renders the USB mouse and keyboard useless and won't work it. The USB ports will recognize that the external HDD is a Toshiba, which is correct, but doesn't supply power to it, thus getting the same error message.

The 2 USB 2.0 ports on the right side of my laptop... when I plug the mouse and keyboard receiver into them neither of them work it. I don't know how to tell which HS those are.