[Guide] - SSDT with Pike's PM Script and use with CPUFriend

[iSn0wCrypt0]

https://imgur.com/M333CofHow can I know that my ssdt is working? Edited May 20, 2019 by Guest

[Oraoo]

Intel Power Gadget

[iSn0wCrypt0]

Intel Power Gadget

 

if I have it installed, but how do I know if it is working? https://imgur.com/M333Cof/url]

[onemanosx]

cf-frequency-data should show in ioreg

https://imgur.com/y0bJFEL

[iSn0wCrypt0]

cf-frequency-data should show in ioreg

https://imgur.com/y0bJFEL

 

When I compiled the file, I said 0 corrections, this is so?

or should I put 1 correction

[iSn0wCrypt0]

https://imgur.com/yQfQ2Oh

Could you create my ssdt? Please

i5-7200,15,800,2500,3100,2,4

[onemanosx]

[ref]iSn0wCrypt0[/ref], try kext method instead of ssdt

[iSn0wCrypt0]

doesnt works

[onemanosx]

[ref]iSn0wCrypt0[/ref], this is something you have to do it on your own

[iSn0wCrypt0]

If I can explain myself well, I speak English very badly!

perform all the steps of the post ... but it does not work for me, as you already know

you told me to perform the steps with the option of kext ..

Now I can not move from here: ./ssdtPRGen.sh -p 'i5-7200' -f 2500 -turbo 3100

send me an announcement: not such directory

Paste my .cfg, but I still throwing the same error

https://imgur.com/Oqi5YgW

[onemanosx]

If I can explain myself well, I speak English very badly!

perform all the steps of the post ... but it does not work for me, as you already know

you told me to perform the steps with the option of kext ..

Now I can not move from here: ./ssdtPRGen.sh -p 'i5-7200' -f 2500 -turbo 3100

send me an announcement: not such directory

Paste my .cfg, but I still throwing the same error

https://imgur.com/Oqi5YgW

Did you place pike's folder in the directory as instructed? Did you replace the Data folder? Did you key in your CPU type in the .cfg file as instructed? You will need to go through it slowly. Good luck.

[iSn0wCrypt0]

I repeat, I followed all the steps to the letter

I have repeated it 20 times .. always the same CPU error

Everything is copied / pasted / and chewed thousands of times

Could you check if my ssdt.aml is correct?

2 weeks ago everything went well and compile the file without problems ..

But I had to restore from scratch and now I have this problem (because you said you would have to appear in IOreg) but it does not appear to me like you ..

Then can you look at my ssdt?

https://drive.google.com/file/d/1maE1v0BS4CYNZS2EQoEmtM-k6o01vb1k/view?usp=drivesdk

[onemanosx]

I cant check if I don't know exactly what you did. Anyone can claim they followed instructions to the letter but without proof, you see.

Anyway, ssdt looks good. So, as per my suggestion, using the existing files you had, you an easily create kext. Read post 2 of the guide.

[iSn0wCrypt0]

I cant check if I don't know exactly what you did. Anyone can claim they followed instructions to the letter but without proof, you see.

Anyway, ssdt looks good. So, as per my suggestion, using the existing files you had, you an easily create kext. Read post 2 of the guide.

 

First, thank you for answering ..

hello I decided to start again (post1) everything went perfect ..

but when restarting it stays stuck here ..

http://imgur.com/3E8VmxV

[anibalin]

Hey guys. I got a 9700k. Do I need to do this procedure? (I already did, just want to know if its pointless). I read that 9900 was not necessary. Which models does not need this?

Moreover, after all this, do I need to uncheck PluginType in clover?

Thanks.

[MaLd0n]

[ref]anibalin[/ref], desktops just use PlugIn type in config.plist, ssdt or dsdt

this way is for solve HWP bug in notebooks

https://www.insanelymac.com/forum/topic/321021-guide-hwpintel-speed-shift-enable-with-full-power-management/

[anibalin]

[ref]anibalin[/ref], desktops just use PlugIn type in config.plist, ssdt or dsdt

this way is for solve HWP bug in notebooks

https://www.insanelymac.com/forum/topic/321021-guide-hwpintel-speed-shift-enable-with-full-power-management/

 

Thanks

[nasca]

Hi, everyone...

After the procedure to resolve Unknown CPU I have in finder same result even if in other applications the CPU is shown...

I have proceeded in this mode:

Downloaded:

curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/master/ssdtPRGen.sh

Copy our modded downloaded DATA folder https://Olarila.com/forum/download/file.php?id=16110

and edit "User Defined.cfg" with:

'E5-2695 v3',120,1200,2300,3300,14,28

after in the terminal

chmod +x ~/ssdtPRGen.sh

again...

sudo ~/ssdtPRGen.sh -p 'E5-2695 v3' -f 2300 -turbo 3300

cd ~/Desktop/CPUFriend-master/ResourceConverter

Download CPUFriend master zip https://github.com/acidanthera/CPUFriend

terminal:

./ResourceConverter.sh --acpi /Users/apple/Library/ssdtPRGen/SSDT.aml

Combining CPUFriend data into Pike's SSDT and save the ssdt.aml and copy to Clover/acpi/patched

Or NOT and...

2. Drag ssdt.aml from ~/Library/ssdtPRgen folder to terminal and Press Enter

3. Your CPUFriendDataProvider.kext will be generated and can be found at ~/Desktop/CPUFriend-master/ResourceConverter folder

4. Place both CPUFriendDataProvider.kext and CPUFriend.kext in clover/kext/others

./ResourceConverter.sh --kext /Users/apple/Library/ssdtPRGen/SSDT.aml

and also

sudo chmod -R 755 kextfile.kext

sudo chown -R root:wheel kextfile.kext

But the CPU in Finder (about this MAC) result unknown (sconosciuta in italian)

Many thanks

Nasca.

[MaLd0n]

[ref]nasca[/ref], Use cpu type in config.plist 0x0a05

check second option here

https://Olarila.com/forum/viewtopic.php?f=62&t=8576

[nasca]

Many Thanks