NEW HACK - Would be the quite best

[erroruser]

[ref]ruglau[/ref], for usb to work follow this guide

">

[ruglau]

I just followed that guide guys! And thanks to this guide I was able to make works the 3.1 gen2, but still 3.0 doesn't work! :(

Theese my USB ports... I'm right?

[onemanosx]

[ref]ruglau[/ref],

1. I think you need to understand what HSxx and SSxx are by reading the quick response HERE

2. There is no "probably my two port type-c". You need to test all ports type A and type C using appropriate testing devices i.e you will need a reliable USB type 3 device or USB type C device and so on. Reading your motherboard documentations helps.

3. There is no "maybe my 3.0 unworking" on HSxx port.

3. It is also helpful for users to know their motherboard specifications e.g what type of USB chipset is in use. Only intel chipsets are fully supported.

4. Lastly, Hackintosh are not perfect Apple product.

Having said that, I have no issues detecting my USB type C and USB type A on my build. Hint: Use reliable detection device for testing.

[ruglau]

so you mean that I have to test unused port with the proprly usb device? On a 2.0 port I have to connect 2.0 on 3.0 only 3.0 etc in IOREG?

what If I don't have an type-c device?

[onemanosx]

[ref]ruglau[/ref], Yes you should test ALL ports (as per the guide suggests) with proper device (as per the guide suggests). I think the answer is obvious that you will not be able to determine which ports are used by USB type C if you do not have the tools and possibly lose other ports due to the lack of test method.

[erroruser]

[ref]ruglau[/ref],

reading through the guides many times helps to get through, if you do not have any type-c you can not properly activate them using fbpatcher helps with the activating the ports so you know what is working in the ioreg

[ruglau]

I connected 2 fan on AIO_FAN on my motherboard, and after that the system stack at the start, is that possible?

[erroruser]

[ref]ruglau[/ref], the fans should plug in to chasis fan or cpu fan on motherboards the aio is for the cpu pump

[ruglau]

right, but with some setting in BIOS now works good also in AIO PUMP,

but still I can't see fan (speed/control) on HWmonitor.

[erroruser]

[ref]ruglau[/ref], show pic of monitor an upload your clover folder

[ruglau]

Here they are

Clover.zip

[erroruser]

now test this

Clover.zip

[ruglau]

No works also with iStat...

maybe some cover configuration?

[ruglau]

[ref]ruglau[/ref], Your monitor needs to support DDC/CI for this app to work.

what happens if u connect device usb in usb3 ports?

 

Maldon, recapping: when I will test USB I have to use:

- one dispositive Type-c gen2 for test usb-c port.

- one dispositive 3.0 for test usb 3.0

- one dispositive 3.1 gen2 for test usb 3.1 gen2 (the red usb)

- one dispositive 2.0 for test usb 2.0

is that correct?

Also you know why I can't see FAN control on my asus rog maximum hero XI?

[MaLd0n]

[ref]ruglau[/ref], I think need only usb2 and usb3 devices, if have usb-c too

fan control? or fan rpm with sensors?

[ruglau]

[ref]ruglau[/ref], I think need only usb2 and usb3 devices, if have usb-c too

fan control? or fan rpm with sensors?

 

Hi dear!

yes but I have usb 3.1 gen2, so for testing that speed I read that I have to use a 3.1 gen2 device, is that right?

I can't see fan sensor on HWmonitr, so I can't see fan and also I can't control them!

[MaLd0n]

[ref]ruglau[/ref], check here a usb patch

https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v171/

[ruglau]

ok Maldon, i'll try to see, and for fan? I followed some people on facebook but nothing works..

[MaLd0n]

[ref]ruglau[/ref], i don't understand what u need for fan

[ruglau]

I saw some people display and control FAN on HWmonitor, instead my hack didn't recognize none fans connected