Enable I2C Trackpad (VoodooI2C) - Not a Guide... not really

Q: What is a Hackintosh?

A non-Apple computer configured to run macOS using compatible PC hardware combined with a custom bootloader and configuration files to emulate a real Mac environment.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple’s End User License Agreement (EULA). It is generally not illegal for personal experimentation but not permitted for commercial use.

Q: What hardware is best for a Hackintosh?

The best hardware closely matches real Apple systems, with Intel CPUs (6th Gen to Core Ultra), AMD Radeon GPUs, compatible chipsets, and Intel-based Wi-Fi cards offering higher success rates.

Q: Can I build a Hackintosh with an AMD CPU?

Yes, macOS can run on AMD Ryzen CPUs using kernel patches, but Intel CPUs provide better native compatibility.

Q: What is OpenCore?

OpenCore is a modern Hackintosh bootloader that provides near-native macOS behavior and is the recommended bootloader for new installations.

Q: Is Clover still supported?

Yes, Clover is still supported but less recommended compared to OpenCore for modern systems.

Q: Which macOS versions support Hackintosh?

Hackintosh systems support macOS versions from Leopard up to recent releases, depending on hardware compatibility.

Q: Do NVIDIA graphics cards work on Hackintosh?

Only older NVIDIA GPUs work on older macOS versions; modern NVIDIA GPUs are incompatible with current macOS releases due to lack of driver support.

Q: What is an EFI folder?

The EFI folder contains the bootloader, drivers, kexts, and configuration files required to boot macOS on a Hackintosh.

Q: What are kexts?

Kexts (kernel extensions) are drivers that enable hardware functionality such as audio, Ethernet, USB, and graphics.

onemanosx · July 19, 2019

[ref]comcomson[/ref], 2 tries! Sendme is appreciated.

PS: You can delete ACPIBatteryManager when using SMCBatteryManager + VirtualSMC kexts

Archive.zip

comcomson · July 20, 2019

[ref]comcomson[/ref], 2 tries! Sendme is appreciated.

PS: You can delete ACPIBatteryManager when using SMCBatteryManager + VirtualSMC kexts

Archive.zip

Good morning from my country (just wake up). Tried 2 dsdt and sending 2 send me renamed respectively.

Deleted ACPIBatteryManager.

Both aren't working touchpad. See attached documents.

sendme_dsdt06.zip

sendme_dsdt07.zip

onemanosx · July 20, 2019

[ref]comcomson[/ref], Good morning! Where are you from btw?

I am focusing on SSCN/FMCN.

Try these.

DSDT-09.aml.zip

DSDT-08.aml.zip

comcomson · July 20, 2019

Not working.

btw Im from Hong Kong

Send me_09.zip

sendme_08.zip

onemanosx · July 20, 2019

[ref]comcomson[/ref], That solved the FMCN/SSCN logs.

HK, That explains why we are at the same timezone

So here is the next step

DSDT-10.aml.zip

DSDT-11.aml.zip

kernel: (kernel) VoodooGPIOCannonLakeLP::Loading GPIO Data for CannonLake-LP
kernel: (kernel) VoodooGPIOCannonLakeLP::VoodooGPIO Init!
kernel: (kernel) VoodooGPIOCannonLakeLP::VoodooGPIO Initializing Community 0
kernel: (kernel) VoodooGPIOCannonLakeLP::VoodooGPIO Initializing Community 1
kernel: (kernel) VoodooGPIOCannonLakeLP::VoodooGPIO Initializing Community 2
kernel: (kernel) VoodooGPIOCannonLakeLP::GPIO Controller is already awake! Not reinitializing.
kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Starting I2C controller
kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Set PCI power state D0
kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Publishing nub
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Probing controller
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Found valid Synopsys component, continuing with initialisation
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Got bus configuration values

comcomson · July 20, 2019

[ref]comcomson[/ref], That solved the FMCN/SSCN logs.

HK, That explains why we are at the same timezone

So here is the next step

DSDT-10.aml.zip

DSDT-11.aml.zip

kernel: (kernel) VoodooGPIOCannonLakeLP::Loading GPIO Data for CannonLake-LP
kernel: (kernel) VoodooGPIOCannonLakeLP::VoodooGPIO Init!
kernel: (kernel) VoodooGPIOCannonLakeLP::VoodooGPIO Initializing Community 0
kernel: (kernel) VoodooGPIOCannonLakeLP::VoodooGPIO Initializing Community 1
kernel: (kernel) VoodooGPIOCannonLakeLP::VoodooGPIO Initializing Community 2
kernel: (kernel) VoodooGPIOCannonLakeLP::GPIO Controller is already awake! Not reinitializing.
kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Starting I2C controller
kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Set PCI power state D0
kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Publishing nub
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Probing controller
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Found valid Synopsys component, continuing with initialisation
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Got bus configuration values

Where are you from

Send me -11.zip

Send me-10.zip

onemanosx · July 20, 2019

Where are you from :o

Singapore

DSDT-12.aml.zip

I think I found the "culprit".

comcomson · July 20, 2019

Singapore

DSDT-12.aml.zip

I think I found the "culprit".

Wow Singapore! Gonna have a Southeast Asia trip soon. Not going to Singapore because its way too expensive that I'm unaffordable as a fresh graduate lol ( I want to go there so badly

What would be the culprit? There's another laptop which is pretty similar to mine, the yoga s730. It doesn't bother like mine does. If success, I would definitely upload EFI folder for other 730s users to make their hackintosh ) gonna add your credit too! So thankful ?

Send me Comsons-MacBook-Pro.zip

onemanosx · July 20, 2019

Not going to Singapore because its way too expensive

Yes, Go elsewhere cheaper and enjoy more! LOL!

The last DSDT is whacked!

DSDT-13.aml.zip

comcomson · July 20, 2019

Yes, Go elsewhere cheaper and enjoy more! LOL!

The last DSDT is whacked!

DSDT-13.aml.zip

Is it the last dsdt.. but still unable to get it working

Send me Comsons-MacBook-Pro.zip

onemanosx · July 20, 2019

[ref]comcomson[/ref], I am afraid some fun has an end. I have used up all possible tricks possible. We managed to solve few issues but I am guessing your I2C is not fully supported.

You can head down to voodooI2C gitter page and seek help from Ben. But, you are always welcome to come back here if you need further clarification

DSDT-last.aml.zip

Please send last sendme.

comcomson · July 20, 2019

[ref]comcomson[/ref], I am afraid some fun has an end. I have used up all possible tricks possible. We managed to solve few issues but I am guessing your I2C is not fully supported.

You can head down to voodooI2C gitter page and seek help from Ben. But, you are always welcome to come back here if you need further clarification

DSDT-last.aml.zip

Please send last sendme.

last send as attached. Appreciated for your help! And so much thanks.

May I know what is the issue behind?

Send me Comsons-MacBook-Pro.zip

onemanosx · July 20, 2019

May I know what is the issue behind?

Thats the issue. Normally, polling mode will run but unfortunately not for your device.

This is the last kernel log.

kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Starting I2C controller
kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Set PCI power state D0
kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Publishing nub
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Probing controller
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Found valid Synopsys component, continuing with initialisation
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Got bus configuration values
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Publishing device nubs
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Found I2C device: MSFT0001
kernel: (kernel) VoodooI2CControllerDriver::VoodooI2CDeviceNub Warning: Incompatible APIC interrupt pin (0x33 > 0x2f) and no GPIO interrupts found; if your chosen satellite implements polling then VoodooI2CDeviceNub will run in polling mode.

However, I still have 3 tricks left.

DSDT-16.aml.zip

DSDT-15.aml.zip

DSDT-14.aml.zip

comcomson · July 20, 2019

Thats the issue. Normally, polling mode will run but unfortunately not for your device.

This is the last kernel log.

kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Starting I2C controller
kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Set PCI power state D0
kernel: (kernel) VoodooI2CPCIController::pci8086,9de8 Publishing nub
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Probing controller
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Found valid Synopsys component, continuing with initialisation
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Got bus configuration values
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Publishing device nubs
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9de8 Found I2C device: MSFT0001
kernel: (kernel) VoodooI2CControllerDriver::VoodooI2CDeviceNub Warning: Incompatible APIC interrupt pin (0x33 > 0x2f) and no GPIO interrupts found; if your chosen satellite implements polling then VoodooI2CDeviceNub will run in polling mode.

However, I still have 3 tricks left.

DSDT-16.aml.zip

DSDT-15.aml.zip

DSDT-14.aml.zip

Ok I got no luck. I may have to give up

onemanosx · July 20, 2019

Ok I got no luck. I may have to give up

Thanks for trying

iki · July 20, 2019

[ref]iki[/ref], DSDT.aml.zip

check if work, replace dsdt, rebuild, reboot
sudo kextcache -i /

not working, and the mouse started moving around by itself again

onemanosx · July 20, 2019

not working, and the mouse started moving around by itself again

Upload new SendMe with the patch

iki · July 20, 2019

Upload new SendMe with the patch

here it is , also if u want i can send u anydesk ip privately if u wanna check everything from here , to make it easier .

Send me iBrahems-MacBook-Pro.zip

onemanosx · July 20, 2019

[ref]iki[/ref], Try and upload new send me.

DSDT-poll.aml.zip

iki · July 20, 2019

[ref]iki[/ref], Try and upload new send me.

DSDT-poll.aml.zip

same problem , here is the new sendMe

Send me iBrahems-MacBook-Pro.zip

onemanosx · July 20, 2019

[ref]iki[/ref], I am troubleshoting one error at a time

DSDT-SSCN-017.aml.zip

New send me please.

iki · July 20, 2019

[ref]iki[/ref], I am troubleshoting one error at a time

DSDT-SSCN-017.aml.zip

New send me please.

oh, ok great , i just keep u updated with the status of the touchpad , now its not moving , i send u the new sendMe Send me iBrahems-MacBook-Pro.zip

onemanosx · July 20, 2019

[ref]iki[/ref], The latest DSDT reports the below which I have not encountered. I will require to do more reading about this issue.

My suspicion is at the ACPI table error "\_SB.PCI0.I2C0.TPD0._DSM"

Let me know if you have found something similar and link me up to that article.

kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Starting I2C controller
kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Set PCI power state D0
kernel: (kernel) VoodooI2CPCIController::pci8086,9d60 Publishing nub
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Probing controller
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Found valid Synopsys component, continuing with initialisation
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Got bus configuration values
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Publishing device nubs
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 Found I2C device: ELAN0608
kernel: (kernel) VoodooI2CControllerDriver::VoodooI2CDeviceNub Warning: Incompatible APIC interrupt pin (0x57 > 0x2f) and no GPIO interrupts found; if your chosen satellite implements polling then VoodooI2CDeviceNub will run in polling mode.
kernel: (AppleACPIPlatform) ACPI Warning: \_SB.PCI0.I2C0.TPD0._DSM:
kernel: (AppleACPIPlatform) ACPI Warning: \_SB.PCI0.I2C0.TPD0._DSM:
kernel: (AppleACPIPlatform) Argument #4 type mismatch - Found [integer], ACPI requires [Package]
kernel: (AppleACPIPlatform) Argument #4 type mismatch - Found [integer], ACPI requires [Package]
kernel: (AppleACPIPlatform)  (20160930/nsarguments-169)
kernel: (AppleACPIPlatform)  (20160930/nsarguments-169)
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 I2C Transaction error details
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 lost arbitration
kernel: (kernel) VoodooI2CControllerDriver::pci8086,9d60 I2C Transaction error: 0x01001000 - aborting
kernel: (kernel) VoodooI2CHIDDevice::ELAN0608 Request for HID descriptor failed
kernel: (kernel) VoodooI2CHIDDevice::ELAN0608 Could not get HID descriptor

iki · July 20, 2019

\_SB.PCI0.I2C0.TPD0._DSM

i have found this article for my laptop version on github , i couldnt really understand a lot from it but am sure u will , can u see if its helpfull ?

https://github.com/gajjartejas/Lenovo-Ideapad-320-15ISK-14ISK-Laptop-Hackintosh/blob/master/10.14.x/10.14.3/Touchpad-Guide.md

onemanosx · July 20, 2019

i have found this article for my laptop version on github , i couldnt really understand a lot from it but am sure u will , can u see if its helpfull ?

https://github.com/gajjartejas/Lenovo-Ideapad-320-15ISK-14ISK-Laptop-Hackintosh/blob/master/10.14.x/10.14.3/Touchpad-Guide.md

Similar laptop?

Wow.. that guide is not so much of a guide LOL

Sign In

Enable I2C Trackpad (VoodooI2C) - Not a Guide... not really

Recommended Posts

onemanosx

comcomson

onemanosx

comcomson

onemanosx

comcomson

onemanosx

comcomson

onemanosx

comcomson

onemanosx

comcomson

onemanosx

comcomson

onemanosx

iki

onemanosx

iki

onemanosx

iki

onemanosx

iki

onemanosx

iki

onemanosx

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity