USB3.0 Restarts after shutdown High Sierra

Q: What is a Hackintosh?

A non-Apple computer configured to run macOS using compatible PC hardware combined with a custom bootloader and configuration files to emulate a real Mac environment.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple’s End User License Agreement (EULA). It is generally not illegal for personal experimentation but not permitted for commercial use.

Q: What hardware is best for a Hackintosh?

The best hardware closely matches real Apple systems, with Intel CPUs (6th Gen to Core Ultra), AMD Radeon GPUs, compatible chipsets, and Intel-based Wi-Fi cards offering higher success rates.

Q: Can I build a Hackintosh with an AMD CPU?

Yes, macOS can run on AMD Ryzen CPUs using kernel patches, but Intel CPUs provide better native compatibility.

Q: What is OpenCore?

OpenCore is a modern Hackintosh bootloader that provides near-native macOS behavior and is the recommended bootloader for new installations.

Q: Is Clover still supported?

Yes, Clover is still supported but less recommended compared to OpenCore for modern systems.

Q: Which macOS versions support Hackintosh?

Hackintosh systems support macOS versions from Leopard up to recent releases, depending on hardware compatibility.

Q: Do NVIDIA graphics cards work on Hackintosh?

Only older NVIDIA GPUs work on older macOS versions; modern NVIDIA GPUs are incompatible with current macOS releases due to lack of driver support.

Q: What is an EFI folder?

The EFI folder contains the bootloader, drivers, kexts, and configuration files required to boot macOS on a Hackintosh.

Q: What are kexts?

Kexts (kernel extensions) are drivers that enable hardware functionality such as audio, Ethernet, USB, and graphics.

Kangooboy · December 11, 2018

Hi. I need help. I just installed a high sierra 10.13.6 on my desktop. Everything works fine. Sees all ports and speed fine. If something is inserted into USB 3.0 ports PC restarts in 3 sec. after shutdown .

Fixes don't help.

Thanks.

Motherboard x79 c602 huanan golden

SSD nvme

CPU xeon e5 2670

16 gb ddr3 1333

radeon vega 64

Send me Rafaels-Mac-Pro.zip

Allan · December 12, 2018

Try use USBInjectAll + port limit patch for High Sierra

MaLd0n · December 12, 2018

try

DSDT.aml.zip

Kangooboy · December 12, 2018

No results. I remember before install system on preload menu if shutdown the same situation. I can not make custom ssdt because my controller VIA and usb ports are shown differently than in the tutorial. Thanks.

P.S. On windows shutdown perfectly

MaLd0n · December 12, 2018

[ref]Kangooboy[/ref], u dont need ssdt, x79 dont have a intel usb 3, only intel usb 2, usb 3 is other manufacturer and dont work native

Kangooboy · December 12, 2018

With USBInjectAll Rehabman works fine usb2 usb3 controller is correctly detected

But restarts...

People writes enable Erp setting bios help. But i dont have this option.

onemanosx · December 13, 2018

Interesting to find a x79 huanan build here.

I do have a couple of xeon E5620 and RAM sticks lying around and is looking at some of the LGA1366 generic boards at Aliexpress.

MaLd0n · December 13, 2018

[ref]onemanosx[/ref], 1366 is amazing

Kangooboy · December 13, 2018

I can upload EFi folder for huanan compatible with high sierra and mojave (thanks DukeDmr from youtube)

onemanosx · December 14, 2018

[ref]onemanosx[/ref], 1366 is amazing

Do not tempt me!

If only I get can a better used board rather than a generic one

Sign In

USB3.0 Restarts after shutdown High Sierra

Recommended Posts

Kangooboy

Allan

MaLd0n

Kangooboy

MaLd0n

Kangooboy

onemanosx

MaLd0n

Kangooboy

onemanosx

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity