USB broken after 10.14.1 update & RX560 high memory usage

[onemanosx]

Rebooted and we have USB this time, not sure how much we have yet

Cool! Now, all you have to do is repeat the USB port mapping as per the guide.

[Monkey303]

OK thanks, so followed the guide but when I get to the USB 3 drives, It only shows 5 ports are in use, there should be 6. According to the motherboard's specs, there are 2x USB on the back I/O and 4x USB 3 with a further 2x USB 3 from a motherboard header to the case USB 3 ports. It's the ports numbered 9 on the I/o picture I posted above.

I can live with that, though, if the speeds are OK. Do you recommend anything for testing the speeds? Thanks

[onemanosx]

[ref]Monkey303[/ref], upload new send me file.

I dont do speed test

[Monkey303]

Haha, OK I will find something

 

Send me Daves-iMac.zip

[onemanosx]

[ref]Monkey303[/ref], You can exclude one more dummy port, USR2 and possibly gain an extra SSxx port.

 

[Monkey303]

I have a Seagate 4TB USB 3 drive, that is not detected on any port in finder.

Patriot USB 3 drive, not detected in finder.

Seagate 2TB USB 3 drive not detected in finder.

All show in the IORegistry explorer.

Added in 1 minute 20 seconds:

Ok thanks, I will give that a try now

[onemanosx]

All show in the IORegistry explorer

If its on ioreg then its loaded. check in finder

[Monkey303]

OK, so I still have no ports other than just the USB 2 ports that we're working to begin with.

Anything plugged into any of the other ports does not work.

Added in 11 minutes 46 seconds:

Rebooted and USB 2 works on all ports, but anything USB 3 plugged in, does not show in finder.

[onemanosx]

[ref]Monkey303[/ref], I'd like you to test this custom kext of mine. ONEM-USB.kext.zip

 

Remove USBinjectall, Remove XHCI unsupported kext and place my kext in Clover>Kexts>Other.

Reboot.

[Monkey303]

Thanks, it's the same, USB 3 devices not recognised in finder.

[onemanosx]

[ref]Monkey303[/ref], Thanks for testing my kext!

Use a different USB 3.0 device. I think its hardware problem now.

[Monkey303]

You're welcome, thanks for helping me

I have Seagate 4tb, Seagate 2TB, Patriot rage 2, some unbranded USB 3 caddy with 5400rpm drive in, none of them show in finder on the Hackintosh, but all work on iMac upstairs. Also, all these devices were working on the Hackintosh before last Mojave update. Very strange!

[Monkey303]

Hello, I have made some progress. I found someone with the same motherboard as mine as they gave me their SSDT. I now have full USB 3 at boot, and all devices register in finder and IORegistry, but when they are disconnected, they will not reconnect again in any port. They do not show up in finder or IORegistryExplorer explorer once disconnected and reconnected until next reboot. Are we nearly there?

Thanks.

[onemanosx]

[ref]Monkey303[/ref], run http://Olarila.com/files/Utils/RunMe.app.zip and upload files here.

I might have solution.

[Monkey303]

Thanks again!

Something strange just happened, so the drive I've been testing with, just showed up in finder about 10 minutes after I plugged it in!

 

Send me Daves-iMac.zip

 

Edit: seems to be recognising the USB 3 drive now. But when I reboot, it freezes as soon as the white text starts on the black screen.

Edit 2: All USB 3 drives recognised once and then if disconnected, they are not recognised after that at all.

[onemanosx]

[ref]Monkey303[/ref], why are u not using patched DSDT?

[Monkey303]

It doesn't work for me, with that installed, no USB 3 devices are detected at all.

[onemanosx]

[ref]Monkey303[/ref],

 

This implies all of your USB 3.0 ports are not working.

[Monkey303]

OK thanks, I will start again