USB broken after 10.14.1 update & RX560 high memory usage

[Monkey303]

Hello again,

My build was running well and I did the 10.14.1 update and since then, I have some issues.

First, the RX560 has 100% memory usage for a lot of the time, and it rarely drops below 50%, even when doing nothing. The rx560 GPU itself is also idling quite high as if it is doing something, resulting in regular spikes of up to 100%. I have the iGPU enabled in the BIOS because I was unable to view images until I did that. This happens with whatevergreen enabled or not.

The second thing is that my USB ports are mostly broken after the 10.14.1 update. Is there an easy way to fix them?

The system is:

8700K

Rog Strix Z390-i

32GB Memory

970 Pro M.2

Gigabyte RX560

Any help, much appreciated, thanks

Send me Daves-iMac.zip

[onemanosx]

For usb check out here https://Olarila.com/forum/viewtopic.php?f=79&t=7370

[MaLd0n]

[ref]Monkey303[/ref], DSDT.aml.zip

 

Added in 8 seconds:

[ref]onemanosx[/ref],

[Monkey303]

Thanks! [ref]onemanosx[/ref], [ref]MaLd0n[/ref]

Where do I put this file, please?

Added in 34 minutes 32 seconds:

EFI/Clover/ACPI/patched

Tried in the above location, but when Mojave loads up, I have no usb at all, so no keyboard etc.

[onemanosx]

[ref]Monkey303[/ref], see that you have usbinjectall kext in your clover/kexts/other and your USB keyboard/mouse is connected to a USB 2.0 port.

[Monkey303]

Thanks onemanosx, I have a Magic Trackpad 2 and magic keyboard 2 that work fine in Mojave, but not in the BIOS (with bluetooth), so while I have been setting up, I've left them wired for now, also my bluetooth dongle is hooked up to one of the USB ports that wasn't working properly. The only ports working at all at the moment are 2x USB 2. Even the USB 2 don't work while the DSDT file is in place.

Do I need to remove the usbinjectall kext?

Thanks for the help

[onemanosx]

check link I gave in post #2

[Monkey303]

Where do we get the ioreg software? I googled and it says from Apple developer site, so I signed up and it's a blank list, nothing to download. Thanks!

[onemanosx]

Where do we get the ioreg software?

The link is in the the youtube's video link description on post #1.

Sorry for the inconvenience.

[Monkey303]

Thanks for the info

OK so I discovered the USB 2 ports and I had HS01;HS02;HS11;HS12;SS01;SS02;SS03 that we're unused. I added these ports to clover as mentioned in the guide, but without the space after the =. When I rebooted, I still had 15 ports with two that were being used HS05;HS06. When I plug the USB 3 device in, some of the ports do not work and the LED does not light up on the end of the USB 3 thumb drive and after going through all the ports, only 3 are showing as in use, and HS01;HS02;HS03;HS04;HS07;HS08;HS09;HS10;HS11;HS12;SS01;SS02 are all showing unused.

[onemanosx]

[ref]Monkey303[/ref], attach new send me folder

[Monkey303]

Thanks

Send me Daves-iMac.zip

[onemanosx]

[ref]Monkey303[/ref],

These explains why its not working for you.

1. There are no usbinjectall uia boot arguments as you had claimed

2. There is no usbinjectall kext in your kext folders

3. You also did not place the patched DSDT by Mald0n in Clover/ACPI/Patched

 

[Monkey303]

Thanks, I just opened clover and they are there, I have done a screenshot. The only thing that isn't there is the DSDT because I had no USB at all with that in there. I will try it again. Thanks!

 

[onemanosx]

Obviously, its not the same files you uploaded.

[Monkey303]

I'll redo the send me again, sorry about that:)

Added in 3 minutes 40 seconds:

Hopefully this is correct now!

 

Send me Daves-iMac.zip

[MaLd0n]

[ref]Monkey303[/ref], use smbios iMac18, use my DSDT, follow [ref]onemanosx[/ref] tutorial about USB

check Olarila app for good clover folder for serie 300

[onemanosx]

[ref]Monkey303[/ref], its still the same.

And yes, dont use Macmini smbios.

[Monkey303]

Thanks for the replies, much appreciated

I'm not sure why the settings aren't showing in your send me results, I am saving them to my bootable USB drive. I tried the USB drive on an iMac and that shows the settings have been saved?

I can confirm that I have no USB functionality at all if I put the DSDT file inClover/ACPI/Patched

I have changed back to iMac 18,3 - I tried the iMac yesterday, I have also tried Mac Pro, all very similar results.

I can't add the DSDT file and follow the guide as I have no USB functionality with the DSDT installed.

I used the olarilla app to make the bootable USB drive with the 3xx folder settings that I am using.

Sorry for being a noob and thanks for being patient

[onemanosx]

Dont boot from usb drive. send me app only reads from system boot drive partition

[Monkey303]

OK thanks, that must be where I am going wrong? How do I transfer everything to my main drive, then?

[onemanosx]

How do I transfer everything to my main drive, then?

 

">

[Monkey303]

Thanks, I don't have the NVRAM.plist, just boot and EFI. Tried command+shift but nothing there.

Added in 12 minutes 38 seconds:

OK, done that and here is the updated send me file.

 

Send me Daves-iMac.zip

 

Added in 2 minutes 37 seconds:

I do not have the DSDT file in place as I have no USB functionality with it there. I re-did the USB guide and it was the same results as last time for the USB 2 and for USB 3 there are several ports not working at all.

Added in 21 minutes 8 seconds:

 

This is the IO on the back of my board, there is also a blue connector on the board that hooks up to the case USB 3 ports, if that helps?

[onemanosx]

[ref]Monkey303[/ref],

check Olarila app for good clover folder for serie 300

 

Assuming you had not replaced your clover folder with post installation package from here https://Olarila.com/forum/viewtopic.php?f=50&t=6254, I suggest you do so. Scroll down to --Install Clover in HDD/SSD and replace with my folder. Download the clover package and copy to your boot drive. Reboot only after placing patched DSDT in patched folder.

Take note if USB is working this time round with patched DSDT. Then run send me app.

[Monkey303]

Thanks again [ref]onemanosx[/ref],

OK, Replaced the clover folder on my boot drive with the one you linked to.

Added the DSDT patch.

Rebooted and we have USB this time, not sure how much we have yet, but here is the send me file.

Send me Daves-iMac.zip