Mojave hangs / freezes with 2 minutes remaining

[MaLd0n]

[ref]Monkey303[/ref], try it

Fix Z390 BIOS DSDT RTC bug
A00A9353 54415301
A00A910A FF0BFFFF

 

add here

[Monkey303]

Thanks! After I’ve done your fix above, which driver should I use?

[MaLd0n]

[ref]Monkey303[/ref], first try with AptioMemoryFix-64.efi, the best driver

[Monkey303]

So this is very strange, with your edit above added and the driver reverted to the original, it is still moving very slow and getting stuck on:

Forcing CS_RUNTIME for entitlement: com.apple.rootless.installgetExceptionList: failed to open /private/var/dB/systemPolicyConfiguration/HardeningExceptions.plistCreating RAM Disk for /var/Log

Do you think my usb drive is corrupted or needs redoing? Thanks!

[MaLd0n]

[ref]Monkey303[/ref], ye, create new USB Stick and check if problem is it

[Monkey303]

Previous usb drive was a usb 2 Kingston, and the new one is patriot rage 2, pretty fast and only a couple of weeks old and still everything is moving incredibly slow, same as the other usb drive.

Hope my m.2 drive isnt going bad. Going to see if I can wipe it completely. I noticed there was an unfamiliar (to me at least) boot screen, but I can’t navigate it, keyboard doesn’t work. I have attached a photo below.

https://ibb.co/BqYdrTd

Edited November 26, 2018 by Guest

[MaLd0n]

[ref]Monkey303[/ref], use only UEFI

[Monkey303]

Thanks, OK I have found the cause of the slow performance, it is a BIOS setting called above 4g encoding, I had reset BIOS earlier and must have enabled it by accident when doing the other settings.

So I can get the installer up and running again, but it still freezes at 2 minutes remaining. The only change at the moment is your etc bug fix. I will try the drivers again.

[MaLd0n]

[ref]Monkey303[/ref], k

[Monkey303]

So with the emu and osxaptiofix driver installed, instead of freezing, it reboots at 2 mins and starts all over again.

Same thing with just the osxaptiofix driver.

Do you think it is worth trying the v2 and v3?

[MaLd0n]

[ref]Monkey303[/ref], u can try a v3, some ppl use old bios version and don't have this problem

[Monkey303]

Tried v3, also tried flashing to the older BIOS, there are only 2 to choose from, both have the same reboot or freeze issues depending on which driver is used.

Giving up for today lol, thanks for the help

[MaLd0n]

[ref]Monkey303[/ref],

[Monkey303]

Good morning!

So, I tried again this morning and when I booted into clover, there were 2 things to boot from, so I chose the second and it went straight into a different kind of installer that I hadn’t seen before and it completed! I now have an install of Mojave but it is very flickery and there is no internet connection. I had disabled WiFi and bluetooth in BIOS, but not the intel lan.

As far as I can see, there are just 2 things not working, lan and flickering graphics. Is this fixable?

Thanks

[MaLd0n]

[ref]Monkey303[/ref], post ur files here, i'll check

RunMe.app

[Monkey303]

I think it’s all working now, thanks again for all the help

Added in 12 minutes 19 seconds:

Forgot to ask, I want to use an apple Bluetooth keyboard and trackpad, is there a recommended dongle that works well for this? Thanks!

[MaLd0n]

[ref]Monkey303[/ref], Orico have compatibility, check in google one good for u

[Monkey303]

Hello again!

So there is a software update for 10.14.1, but when I try to update, it starts to install, then says something about generating a report and reboots, but it hasn’t installed the update.

Also, on the clover boot screen, I have:

1. Boot macOS install from install macOS Mojave

2. Boot FileVault prebooter from Preboot

3. Boot macOS install prebooter from preboot

4. Boot macOS install from Hackintosh 970 Pro

5. Boot macOS from Hackintosh 970 Pro

6. Boot recovery from recovery

I think number 4 and 5 start to do some kind of install and they hang at 28 minutes remaining. Are they from previous install attempts, or are they to do with the failed update?

Finally, I have a RX 560, It installed ok, but scrolling in safari and mouse pointers are not quite smooth, could this be something left over from the uhd 630 graphics drivers? Or do I need to add drivers manually for the rx 560.

Thanks.

[MaLd0n]

[ref]Monkey303[/ref], RX560 is native, u just need a correct ig-pltform-id for igpu, the best is both work together

[Monkey303]

Ok thanks for the info. Do you have any idea about the Mojave 10.14.1 and the extra clover boot screen items? Thanks

[MaLd0n]

[ref]Monkey303[/ref], strange

use intelgfx 0x12345678 for install

[seyhaheng2]

what is the solution have you done?

Added in 25 seconds:

i have the same issue but i don't know how to fix it.

Added in 10 minutes 28 seconds:

i have the same issue any solution with it yet?

[MaLd0n]

[ref]seyhaheng2[/ref], uncheck injtectintel and use intelgfx 0x12345678

[seyhaheng2]

how to uncheck injectintel and user intelgfx 0x12345678

Added in 1 minute 58 seconds:

here is for uncheck how about the intelgfx 0x12345678

[MaLd0n]

[ref]seyhaheng2[/ref], DEVICES tab