[Guide] Hardware Encoder / Hardware Decoder / Video Processing / HEVC Support / Intel Quick Sync

[artnr28]

thanks a lot ! looks like it works, i just need it to change my processor frequency to much lower, and intel graphics also to from 512 to 256mb and from 1gb to 512mb.

but now i dont know why my istat dont see any intel graphics, just AMD card.

[MaLd0n]

[ref]artnr28[/ref], use intelpowergadget

[jhonwick]

can i enable hardware acceleration in my config(core-i3,geforce210)?

[MaLd0n]

[ref]jhonwick[/ref], if have IGPU yes, SandyBridge+

[cachiputi]

Hi MaLd0n !!

I have a problem with HD4600 (I7-4770K) NO HEVC works.

any idea?

my ioreg add

Thanks!!

iMac no HEVC.ioreg.zip

[onemanosx]

[ref]cachiputi[/ref], HEVC supports for Skylake+

Read first post.

https://i.imgur.com/PQJlG5D.png

[cachiputi]

cachiputi, HEVC supports for Skylake+

Read first post.

https://i.imgur.com/PQJlG5D.png

 

Sorry.

My GTX 760 2gb not Decode/Encoder HEVC ?¿

[prashantloveguru143]

i5 9400

B360MD3H (F12 BIOS)

R9 280X

installed 10.13.6 successfully also did security update.

but problem is i can use either UHD630 or R9280x

initially i tried only with iGPU (DVI port) , but no success as igpu ll activated but totally black screen.

so i did framebuffer pathing so that i successfully activated UHD630 (HDMI port), (see image) h/w acceleration enabled supporting h.264,HEVC

then disabaled igpu in bios and put 280x (HDMI), and running it perfectly but no quicksync

then i enabled internal graphics iGPU in bios and display connected to 280x(HDMI) then unable to boot system. it stuck. (refer images)

its very important to enabling quick sync as i m fcpx user.

plz help

https://drive.google.com/open?id=1RvqW5HpqDNZ6r6muXUqvPjFa3HrllT2B

https://drive.google.com/open?id=1TDG5Wg2Xu-8yoGUG4s1g4GwsOUaYdzuZ

https://drive.google.com/open?id=1hX50cAv3y9FUSvh3cCoSJoEC1J7oLiwS

https://drive.google.com/open?id=1KEn9zvQdFCOZyGZkM6JNPEMoF_Y2jm_m

https://drive.google.com/open?id=1lvJj4cU0-1B-3kajW4CsNLhxhdI8HKlO]

https://drive.google.com/open?id=1AU4dllhcQ_2tRoY2vKub1F_jSccI-eyH

Added in 32 minutes 20 seconds:

I have a problem with HD4600 (I7-4770K) NO HEVC works.

HASWELL doesnt support HEVC , https://i.imgur.com/PQJlG5D.png

B360s-iMac-r9-280x.zip

B360s-iMac-inteluhd630.zip

[MaLd0n]

[ref]prashantloveguru143[/ref], use only my efi folder with CSM = disable and Internal Graphics = Enable, change onlçy two option in ur bios, reboot and extract new send_me

EFI.zip

[prashantloveguru143]

my efi folder with CSM = disable and Internal Graphics = Enable

thank u so much MaLd0n for quick reply,

disabling CSM solves 90% of problem,

Case1: using ur efi folder , Internal Graphics = Enable, display connected to 280x(HDMI)

booted succesfully

but now problem in iGPU not loaded, Quick sync not working. in this case.

Case2: using ur efi folder , Internal Graphics = Enable, display connected to 280x(HDMI)

so tried inject intel in clover, in verbose i m seeing that iGPU is loading but unable to reach login screen, display black out.

i think there is some connector port issue. wat to do now.

[prashantloveguru143]

problem in iGPU not loaded, Quick sync not working

i injected intel and apply framebuffer patch in device properties, smbios 18,3

everything works properly with quicks sync.

thank u so much.

Built successful !

[rokdrgo]

[ref]MaLd0n[/ref], Hi I would like to know if you can help me. I can't get my FCPX to work smoothly, everything else runs Ok. I'm willing to support you men

My system properties are

Asus Strix Z270h

i7 7700

Sapphire Nitro RX580 8GB

24Gb DDR4 RAM

Mojave 10.14.6

My EFI folder: https://drive.google.com/open?id=1cdev6jSWAfweYdxUbSqu3PFFsmV_pf8V

[MaLd0n]

[ref]rokdrgo[/ref], use Olarila clover folder for ur chipset, serie 20/200

https://Olarila.com/forum/viewtopic.php?f=28&t=8222

[rokdrgo]

[ref]MaLd0n[/ref], Thank you men, I'll try it and let you know.

I already donated a couple of bucks. Cheers from Rodrigo Nava

Update

I used your EFI folder and worked Ok, but FCPX performance remains the same. I already added this ->

IntelGFX 0x59128086

ig-platform-id 0x59120003

Check InjectIntel

shikigva=60

and performance hasn't changed. I still confused.

[erroruser]

[ref]cachiputi[/ref], HEVC wont work on haswell as they are not supported

[MaLd0n]

[ref]rokdrgo[/ref], run one brucex and check score/seconds

[rokdrgo]

[ref]MaLd0n[/ref], I got 16.25 seconds, on my High Sierra (same computer) I used to have 14 seconds top

[MaLd0n]

[ref]rokdrgo[/ref], not much, just ignore

[rokdrgo]

[ref]MaLd0n[/ref], I really wouldn't mind if the playback perfomance were as good as with High Sierra, but can't go back because I need Mojave

[MaLd0n]

[ref]rokdrgo[/ref], run it and check if work

VDADecoderChecker.zip

[rokdrgo]

[ref]MaLd0n[/ref], I ran VDADecoder and displayed this

" GVA info: Successfully connected to the Intel plugin, offline Gen95

Hardware acceleration is fully supported

logout "

Luckily I did some research and I wanna stand for future users who are interested on FCPX ( Final Cut Pro ) that the longer and bigger gets a project on this software, the more clunkier and slower will performance gonna be, I had 4k material on a 500GB project and performance was so so, then when I did a little project with 4k files and only 50GB playback was awesome. This is bad only when you're editing, when you Render your final edits performance will be always the same.

Also, at least leave 100 GB unused space on the Hard Drive you put your library.

[ref]MaLd0n[/ref], again thank you for your help, if you have any nice tips, I'll appreciate it. Cheers.

[MaLd0n]

[ref]rokdrgo[/ref], just enjoy

[mau108]

What am I doing wrong? I have Mojave installed on my laptop and I believe the correct kexts loaded but hardware accelleration does not work. Stuff is sluggish on the laptop, like youtube stutters and such. In Hackintool it shows vda decoder failed but system report shows video driver loaded?

Please see screenshot.

[ruglau]

Am I the only one that can't understand what I have to do? (DUMP GPU PROBLEM)

[MaLd0n]

[ref]ruglau[/ref], u need enable igpu and use correct properties