juanvascas Posted June 27, 2019 Posted June 27, 2019 Hmmm I am not sure then what it is, I can boot with my config.plist and Bios.aml, but I can’t with the dsdt.aml nor the Bios.aml with your config.plist I can boot with your coffe lake mobos 300 efi folder, does it work if I get a new Send Me with it?
Administrators MaLd0n Posted June 27, 2019 Author Administrators Posted June 27, 2019 [ref]juanvascas[/ref], yes -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
juanvascas Posted June 27, 2019 Posted June 27, 2019 Extracted using the notebooks skylake+ efi folder. Send me Juans-MacBook.zip
Administrators MaLd0n Posted June 28, 2019 Author Administrators Posted June 28, 2019 [ref]juanvascas[/ref], DSDT.aml.zip enable ECDV to EC patch -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
juanvascas Posted June 28, 2019 Posted June 28, 2019 Thanks man! It seems that my laptop is running really smooth now! I will get the voodooi2c patch and it it’s reaaady
Administrators MaLd0n Posted June 28, 2019 Author Administrators Posted June 28, 2019 [ref]juanvascas[/ref], extract new sendme -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Administrators MaLd0n Posted June 28, 2019 Author Administrators Posted June 28, 2019 [ref]juanvascas[/ref], replace two files Arquivo Comprimido.zip -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
juanvascas Posted June 28, 2019 Posted June 28, 2019 I get this according to the kernel log: VodooI2CControllerDriver::VoodooI2CDeviceNub Warning: Incompatible APIC interrupt pin (0x33 > 0x2f) and no GPIO interrupts found; if your chosen satellite implements polling then VoodooI2CDeviceNub will run in polling mode. Send me Juans-MacBook.zip
Administrators MaLd0n Posted June 28, 2019 Author Administrators Posted June 28, 2019 [ref]juanvascas[/ref], is full load https://i.imgur.com/p5thj6K.png' alt='IMGUR>'> -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
juanvascas Posted June 28, 2019 Posted June 28, 2019 Oh that's it with VoodooI2C then, thanks! Last thing I don't have working is proper audio, I want to use vanilla apple had + appleALC and I should use layout id = 13 according to AppleALC resources (ALC3246). If I inject 1,3 or any other with clover I get no audio but I get dynamic cpu power management while if I use layout 13 I have audio but cpu is always at 3.4GHz.
Administrators MaLd0n Posted June 28, 2019 Author Administrators Posted June 28, 2019 [ref]juanvascas[/ref], strange try last version -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
juanvascas Posted June 28, 2019 Posted June 28, 2019 I did and same thing happens, I do not think it is either the DSDT not the config plist it might be because I someday replaced the AppleHDA with a non vanilla one or some other problem because it happened to me also with my previos ssdts and config so I will try to reinstall macOS Mojave and see what happens.
juanvascas Posted July 2, 2019 Posted July 2, 2019 I got it fixed! And I was right it had nothing to do with your work. For anyone with the same issue, I found out that it was caused by the audio, ALC256 is known to have static noise issue which should be fixed in order to make the cpu work properly! I was using a solution that onemanosx pointed me to, but it was not loading at startup which was weird. I did a clean install and voila, working perfectly now! Perfectly working Hackintosh now
Administrators MaLd0n Posted July 2, 2019 Author Administrators Posted July 2, 2019 [ref]juanvascas[/ref], -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
sosoluis Posted July 3, 2019 Posted July 3, 2019 Hello Master, I would be very pleased if you can give me orientation about this: I have a Mojave (vanilla by Shane) ryzentosh (ryzen 2200G with Vega iGPU) on a MSI A320M Pro-M2. If I inject ATI, a loading cursor appears during loading, and print over itself (not clearing its buffer) eternally. Without injection, I have no acceleration. Thanks in advance. Send me iMac.zip
Administrators MaLd0n Posted July 3, 2019 Author Administrators Posted July 3, 2019 [ref]sosoluis[/ref], vega have a full native support, the best is use iMacPro1,1 smbios -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
artnr28 Posted July 24, 2019 Posted July 24, 2019 hi, whats the name of this application:( i cant remeber
Administrators MaLd0n Posted July 24, 2019 Author Administrators Posted July 24, 2019 [ref]artnr28[/ref], VideoProc.app -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
artnr28 Posted July 24, 2019 Posted July 24, 2019 hi again long time no see , so ...my intel graphics is not working, when i go to bios to switch it ON, i cant even switch my computer back to life, so i have to leave it on AUTo in order to use the computer, i tried to convert 8gb MKV file last night using handbrake and it took 5hr .
Administrators MaLd0n Posted July 25, 2019 Author Administrators Posted July 25, 2019 [ref]artnr28[/ref], what happens if u enable igpu? -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
artnr28 Posted July 25, 2019 Posted July 25, 2019 i cant start the computer, just a big bunch of lines with numbers and letters on the screen, and then nothing happens
Administrators MaLd0n Posted July 25, 2019 Author Administrators Posted July 25, 2019 [ref]artnr28[/ref], extract one send_me -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Administrators MaLd0n Posted July 25, 2019 Author Administrators Posted July 25, 2019 [ref]artnr28[/ref], EFI.zip -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now