[Guide] Hardware Encoder / Hardware Decoder / Video Processing / HEVC Support / Intel Quick Sync

[erroruser]

[ref]Najr4d[/ref], use clover config from here https://Olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip then

make sure your bios is current an add in values from here to your config plist with clover config

-Coffeelake(9 Gen)

IntelGFX 0x3E928086

ig-platform-id 0x3E910003

Check InjectIntel

shikigva=60

set smbios for imac 19,1

for bios gpu see here https://drive.google.com/open?id=1eP5kTh4IlBgKpbbr7DHndIeaRqIIS417

once Maldon has done dsdt place in the efi/efi/clover/acpi/patched folder

[Najr4d]

As soon as I come back home, I will do these things and write.

Thank you for your interest in my case.

[Najr4d]

Ok. I did this on the EFI which I gave in the post from 20 Apr 2019, 23:35

Send me Najrads-iMac.zip

[MaLd0n]

[ref]Najr4d[/ref],

1- Replace Full Clover Folder

CLOVER.zip

2- Install Clover again with correct options

Last Clover Version UEFI

3- Reboot

4- Extract new Send_me

[Najr4d]

Yes Sir! Done:

Send me Najrads-iMac.zip

[MaLd0n]

[ref]Najr4d[/ref], Looks good

[Najr4d]

So I leave your EFI and I can work in FCPX? Thank you for your consultation and help

[MaLd0n]

[ref]Najr4d[/ref], with my last clover folder u can, take one shot

[Najr4d]

It seems to be OK. IntelPowerGadget shows the use of iGPU 1200Mhz during FCPX encoding. iStat on the chart does not show, but the numbers are 1.2GHz. Thank you for your help is OK.

I will ask you how is PM managed? I do not have SSDT, and the "Plugin Type" in Clover is turned off. How it's working ?

[MaLd0n]

[ref]Najr4d[/ref], in my DSDT, full Vanilla way

[Najr4d]

MaLd0n You are a great man thx.

[MaLd0n]

[ref]Najr4d[/ref], just enjoy

[usapar]

Hi @MaLdon

When I put this value it doesn't work hardweare Encode.

-Coffeelake(9 Gen)

IntelGFX 0x3E928086

ig-platform-id 0x3E910003

Check InjectIntel

shikigva=60

I run the RunMe, would you c’k this file.

Thank you for advance.

Send me.zip

[MaLd0n]

[ref]usapar[/ref], u need enable IntelHDGraphics in bios/uefi setup

[usapar]

Thank you for your comments

It looks like that has accelerated in IORegistryExplorer.

IGPU@2 -> IntelAccelerator

But, VDADecoderChecker is appear error.

AVDCreateGPUAccelerator: Error loading GPU renderer

VDADecoderCreate failed. err: -12473

My BIOS setting

Peripherals -> Initial display output -> PCIe 1 Slot

Chipset - > Internal Graphics -> Enabled

DVMT Pre-Allocated -> 64M

DVMT Total Gfx Mem -> 256M

Not find in the other in BIOS.

Do you have any ?

Thank you,

[MaLd0n]

[ref]usapar[/ref], just change it

Chipset - > Internal Graphics -> Enabled

and use it

https://Olarila.com/forum/viewtopic.php?f=62&t=7164

nothing more

[usapar]

I made careless mistake at copy paste.

It's a hyphen in front of shikigva

I was overlooking that.

Thank you so much,

[Staramirabelka]

Najr4d, in my DSDT, full Vanilla way

 

Hello @MaLd0n , one question, what changes / patches did you do in your DSDT? If I may ask?

@Najr4d. "tragiczna kultura pracy RX580 po wybudzeniu ze sleep" - How does it manifest? Fans spin, do not turn off?

PS. : I will build the same, but wait until 10.14.5, there should already run the RX5XX better, according to the last BETA.

[MaLd0n]

[ref]Staramirabelka[/ref],

-FIX ERRORS AND WARNINGS
-FIX ACPI ERRORS
-REMOVE UNUSED
-HIGH PRECISION EVENT TIMER
-SATA SERIE 10 ID
-DMAC
-REMOVE 30K+ LINES, PROBLEMATIC and UNUSED
-FIX K.P in REBOOT
-NVRAM / REAL TIME CLOCK
-SLPB
-DARWIN / WINDOWS 2015
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-REAL TIME CLOCK
-ARTC
-IPIC
-TIMR
-SBUS
-MIKEY
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-UAR1
-LAN
-FWHD
-USBX
-PMCR
-PPMC
-XSPI
-GMM
-IMEI
-EC
-PNLF
-ARPT
-GFX0
-NVME
-DTGP
-ACQUIRE MUT0 0XFFFF
-OPERATION REGION GPIO
-MUTEX MUT0 0x00
-EXTERNAL REFERENCES
-UNKNOWNOBJ
-HDMI / HDAU
-FULL RENAMED DEVICES

[Staramirabelka]

Thank you very much @MaLd0n!

[h4ktosh]

hi

quick sync not enabled, i attached my efi folder can u take a look on that? please

EFI.zip

[MaLd0n]

[ref]ehsan58[/ref], u need a intelhd enable too, both gpus work together

[h4ktosh]

[ref]MaLd0n[/ref], can u tell me how? if u can do it on my config

[MaLd0n]

[ref]ehsan58[/ref], u need use a config from first post, reboot and enable intelhd

[Najr4d]

@Najr4d. "tragiczna kultura pracy RX580 po wybudzeniu ze sleep" - How does it manifest? Fans spin, do not turn off?

After waking up, as the temperature rises to 55C, the fans turn on max for about 2-3 seconds - until the temperature drops to 50C and thus into a circle. I have two monitors, so I have 55C quickly