Guide Gigabyte Z68A-D3H-B3 (High Sierra 10.13.6)

[aatmik]

unishit and mix matching

i have downloaded 10.13.6 Olarila and making USB drive ... btw can I use multi beast for post install ... and I have downloaded clover 2 folder for 5,6,7,8,9 from Olarila app hope it works

[onemanosx]

Do not use multishit.

[aatmik]

Hey I have installed Olarila 10.13.6 and boot got stuck at this window... I have added one boot arg nv_disable=1...

[aatmik]

SO FINALLY I REMOVED MY GRAPHIC CARD AND IT WORKED...thank you sooooo much for your support ...

now how to boot without pen drive and how to Install other kexts ... audio works fine plus I had driver for my wifi dongle and it worked and i have installed my Nvidia drivers but its not allowing me to boot with my card how to solve that and I can't boot without pen drive ...

THANK YOU SOOO MUCH GUYS .. lots of love from India

[erroruser]

which one .. tonycrap or clover folder

unishit and mix matching

I can relate to that big time as i had issues using unishit an then having kexts in the other folder always gave kp

Added in 10 minutes 6 seconds:

[ref]aatmik[/ref],

">

some kexts just have to put in the efi/efi/clover/kexts/other folder an you would use w/e efi mounter you like

(clover config,espmounter,ect)

an for getting new kexts use this tool https://www.insanelymac.com/forum/topic/334222-kext-updater-keep-your-kexts-fresh-with-only-one-click/

[aatmik]

hey guys I can boot without USB now .. but I have problem with my USB 3.0 port can't use my external hard drive in 3.0 .. it's not showing icon on desktop even checked 13.10.6 USB 3.0 patch in clover but its not working .. plus I have installed Nvidia driver and injected in clover but when I restart with my GPU its not booting ... ... I am using GT 1030 D5 GPU ... please help

[onemanosx]

Read point D, H and J from my guide

[aatmik]

Read point D, H and J from my guide

 

Hey I have installed cuda and nvidia drives... Whenever I boot without gpu it's working fine and when I try to boot with gpu it stucks at this window..

[aatmik]

Finally everything isworking fine...

Audio working

Gpu working

Wifi dongle working

Now just one problem... I have tried so many things but couldn't fix that... It's my USB 3.0 port when I connect my HDD it's not showing me any Icon on the desktop but when I connecte USB stick in 3.0 port its showing me Icon on desktop... Can anyone help me with that??

[MaLd0n]

[ref]aatmik[/ref], https://Olarila.com/forum/viewtopic.php?p=65287#p65287

[aatmik]

[ref]aatmik[/ref], https://Olarila.com/forum/viewtopic.php?p=65287#p65287

Hey This worked for my MOBO usb 3.0 but my case frontal usb3.0 is not working but thats ok ... thank you so much Team Olarila ... love you guys

[onemanosx]

thank you so much Team Olarila ... love you guys

Congrats and enjoy your hack!

[onemanosx]

SSDT for EHxx & xHci devices

I know this is long overdue and that I no longer using this build specifically. But, recently I helped another hackintosher to work on his USB ports. I do not know what board he used, but looking at the ioreg and DSDT table, I knew he used an old generation build similar to mine.

The build includes

a. USB 2.0 bus named EH01 and EH02

b. xhc VIA chipset USB 3.0

Since, his total xhc USB ports are less than Apple's 15 ports limitation, his build do not require the use of kext to patch at all. This is also a similar scenario for my board. But, his USB 3.0 although unsupported by usbinjectall will not work at full speed without the aforementioned kext.

Lets deal with his EH0x USB 2.0 bus first.

1. Renaming EHC1 to EH01 and EHC2 to EH01

This can be done in clover hot patch if DSDT tables uses EHCx instead of Apple's EH0x.

2. Details of EH01/EH02 ports in IOREG

He mentioned he'd like to eliminate the rest of the ports except the ones he used i.e PR11 and PR21.

This is a simple solution by using an SSDT as below.

 

DefinitionBlock ("", "SSDT", 1, "APPLE", "hack", 0x00000045)
{
   External (_SB_.PCI0, DeviceObj)
   External (_SB_.PCI0.EH01, DeviceObj)
   External (_SB_.PCI0.EH01.HUBN, DeviceObj)
   External (_SB_.PCI0.EH02, DeviceObj)
   External (_SB_.PCI0.EH02.HUBN, DeviceObj)

   Scope (\_SB.PCI0.EH01.HUBN)
   {
       Name (_STA, Zero)  // _STA: Status
   }

   Scope (\_SB.PCI0.EH02.HUBN)
   {
       Name (_STA, Zero)  // _STA: Status
   }

   Scope (\_SB.PCI0.EH01)
   {
       Device (EH01)
       {
           Name (_ADR, Zero)  // _ADR: Address
           Device (HUBN)
           {
               Name (_ADR, Zero)  // _ADR: Address
               Device (PR11)
               {
                   Name (_ADR, One)  // _ADR: Address
                   Name (_UPC, Package (0x04)  // _UPC: USB Port Capabilities
                   {
                       0xFF, 
                       Zero, 
                       Zero, 
                       Zero
                   })
               }
           }
       }
   }

   Scope (\_SB.PCI0.EH02)
   {
       Device (EH02)
       {
           Name (_ADR, Zero)  // _ADR: Address
           Device (HUBN)
           {
               Name (_ADR, Zero)  // _ADR: Address
               Device (PR11)
               {
                   Name (_ADR, One)  // _ADR: Address
                   Name (_UPC, Package (0x04)  // _UPC: USB Port Capabilities
                   {
                       0xFF, 
                       Zero, 
                       Zero, 
                       Zero
                   })
               }
           }
       }
   }
}

 

3. Details of USB 3.0 device

As for his xhc devices, he wanted properly named ports aside from wanting for them to work without using kext.

Please note that not all unsupported VIA chipsets will work with this method! He is lucky that this ssdt activates his USB 3.0 ports running at full 5gbs speed! Even on my build, the USB 3.0 VIA chipset is unable to work even with use of kext!

 

DefinitionBlock ("", "SSDT", 2, "APPLE ", "Xhci", 0x00001000)
{
   External (_SB_.PCI0.RP08, DeviceObj)
   External (_SB_.PCI0.RP08.PXSX, DeviceObj)

   Scope (\_SB.PCI0.RP08)
   {
       Scope (PXSX)
       {
           Name (_STA, Zero)  // _STA: Status
       }

       Device (XHC2)
       {
           Name (_ADR, Zero)  // _ADR: Address
           Device (RHUB)
           {
               Name (_ADR, Zero)  // _ADR: Address
               Device (HSP1)
               {
                   Name (_ADR, One)  // _ADR: Address
                   Name (_UPC, Package (0x04)  // _UPC: USB Port Capabilities
                   {
                       0xFF, 
                       Zero, 
                       Zero, 
                       Zero
                   })
               }

               Device (HSP2)
               {
                   Name (_ADR, 0x02)  // _ADR: Address
                   Name (_UPC, Package (0x04)  // _UPC: USB Port Capabilities
                   {
                       0xFF, 
                       Zero, 
                       Zero, 
                       Zero
                   })
               }

               Device (SSP1)
               {
                   Name (_ADR, 0x03)  // _ADR: Address
                   Name (_UPC, Package (0x04)  // _UPC: USB Port Capabilities
                   {
                       0xFF, 
                       0x03, 
                       Zero, 
                       Zero
                   })

               }

               Device (SSP2)
               {
                   Name (_ADR, 0x04)  // _ADR: Address
                   Name (_UPC, Package (0x04)  // _UPC: USB Port Capabilities
                   {
                       0xFF, 
                       0x03, 
                       Zero, 
                       Zero
                   })

               }
           }
       }
   }
}

 

Final Conclusion

With the SSDT in place inside Clover's ACPI patched folder and included in the sorted order, here is what we have! Looks clean and neat!