Acer Aspire V15 Nitro Black Edition VN7-592G (High Sierra/Mojave/Catalina) (Dual boot Windows 10) – Success

[Naveed Ahmad]

[ref]Naveed Ahmad[/ref], please test CLOVER.zip

Hi Sir

Your CLOVER.zip Fully Worked Thanks

Sir can you Tell Me About DSDT Patches, What Patches I Apply for My Acer Laptop. I Patched My DSDT My Self. Thanks.

[onemanosx]

I wish I could.. but reading guides is good.

[Naveed Ahmad]

I wish I could.. but reading guides is good.

ok Sir Give me Link for Full and Simple Guide for DSDT Patching Thanks

[onemanosx]

Guide for DSDT Patching Thanks

Read Rehabman's guides to DSDT patching. Google for links.

[Naveed Ahmad]

Read Rehabman's guides to DSDT patching. Google for links.

Hi Sir one question plz

Added in 6 minutes 35 seconds:

I Apply these Patches in my DSDT. these patches are complete or more patches needs?

DSDT

• Layout id = 3 (0x03)

• Rename GFX0 to IGPU

• Fix _WAK Arg0 v2

• HPET Fix

• SMBUS Fix

• IRQ Fix

• RTC Fix

• OS Check Fix

• Fix Mutex with non-zero SyncLevel

• USB3_PRW 0x6D Skylake (instant wake)

[onemanosx]

I Apply these Patches in my DSDT. these patches are complete or more patches needs?

These are basic patches for a system to function. Some need more than others. Edited December 18, 2018 by Guest

[onemanosx]

Can you check my Clover? I can't boot to High Sierra Installer. I tried all. Help please.

Use this config.plist for installation https://www.Olarila.com/forum/download/file.php?id=15383

[Wrx95Pro]

Use this config.plist for installation https://www.Olarila.com/forum/download/file.php?id=15383

Okay, i installed config, and it's loaded much farther than before. But, after loading - only black screen. What i do wrong? I used clear Clover installation without any kexts or patches, except FakeSMC.

https://drive.google.com/file/d/1oaiNmnqD7dAr9qLARvWXivHh4z6kaUjc/view?usp=sharing

[onemanosx]

[ref]Wrx95Pro[/ref], use fake graphics id and post verbose screenshot.

https://www.Olarila.com/forum/download/file.php?id=11518

[Wrx95Pro]

[ref]onemanosx[/ref], i used fake id for graphics, but it didn't help. another black screen after loading.

verbose post screenshot:

https://drive.google.com/file/d/1oCjmMq45uxfPhrNR82A1-1YNa91RULHN/view?usp=sharing

after that, for less than a second it shows some more strings:

https://drive.google.com/file/d/1sbXsWhpSCjZA98L6WRYa5MGzTEi-Ic3e/view?usp=sharing

[onemanosx]

[ref]Wrx95Pro[/ref], you probably did not have graphics kext in clover.

[mathewgx]

Increase intel graphics Vram value to 3072MB

Screen Shot 2018-12-01 at 10.02.18 AM.png

Will there be adverse effects doing this? Only time will tell..

 

So , what is your opinion ?

Does it have negatives ?

[onemanosx]

So , what is your opinion ?

Does it have negatives ?

 

No issues with my 8gb RAM setup for the usual daily mails, surfing and youtube.

[onemanosx]

# Combo Jack Fix

For the longest time, I had been waiting for this moment. Alas, combo jack microphone works!

https://github.com/hackintosh-stuff/ComboJack

Just follow the instructions and all is good to go! Stoked!

 

[MaLd0n]

[ref]onemanosx[/ref],

[erroruser]

[ref]onemanosx[/ref],

[Ezekiel1998]

onemanosx,

can you upload your clover folder for me as a references? thanks

[Ezekiel1998]

Hi onemanosx,

I managed to get my vn7-592g Hackintosh works, now got problem need to ask for your help.

1st problem: Type C

I tried to let the type c port work by using your method vanilla patch usb in Dsdt, all the port is same as yours, HS01, HS02, HS06(2.0) and SS02 & SS06 (3.0) for three USB port, HS07, HS09, HS10 for webcam and wifi bluetooth.

_UPC for these device in Dsdt changed to

Method (_UPC, 0, Serialized) // _UPC: USB Port Capabilities

{

Return (UUPC (One, One))

}

But my type c port was not working like before. Thunderbolt: No hardware was found. How to solve it?

2nd Problem: Voodooi2C

After patch of voodooi2c in MaciASL, windows 10 patch,GPI0 Controller Enabler(SKL+) and I2C Controller(SKL). edited pin list to 0x1b and return sbfg for I2C1 TPD1. DSDT Compiled successfully with no errors but after I put my Dsdt.aml into ACPI/patched. My laptop even cannot boot into the system, it stuck at reading Dsdt. ACPI Error: [_SB_.PCI0.I2C1] Namespace lookup failure, AE_NOT_FOUND ACPI Exception: AE_NOT_FOUND, During name lookup/catalog. and more.

last show ACPI ERROR 7 table load failures, 16 successful.

My Dsdt confirm works before patch the VoodooI2C. How to fix it?

 

DSDT.zip This is my DSDT after patch the USB and without VoodooI2C. Can u help me check for it. Thanks

[onemanosx]

[ref]Ezekiel1998[/ref], upload a full dump with run me app. I'll take a look at them later.

[Ezekiel1998]

FIle Attached( RunMe cannot find my clover folder)

Send me Ezekiels-MacBook-Pro.zip

CLOVER.zip

[onemanosx]

[ref]Ezekiel1998[/ref], See if works.

Download I2C kexts here https://github.com/alexandred/VoodooI2C/releases Use only voodooI2cHID and voodooI2C kexts.

 

DSDT.zip

 

Add this patch in clover/KextsToPatch

 

<dict>
			<key>Comment</key>
			<string>Prevent Apple I2C kexts from attaching to I2C controllers, credit CoolStar</string>
			<key>Disabled</key>
			<false/>
			<key>Find</key>
			<data>
			U1U5TGFYUT0=
			</data>
			<key>InfoPlistPatch</key>
			<true/>
			<key>Name</key>
			<string>com.apple.driver.AppleIntelLpssI2C</string>
			<key>Replace</key>
			<data>
			U1U5TGFYTT0=
			</data>
		</dict>
		<dict>
			<key>Comment</key>
			<string>Prevent Apple I2C kexts from attaching to I2C controllers, credit CoolStar</string>
			<key>Disabled</key>
			<false/>
			<key>Find</key>
			<data>
			U1U5TGFYUT0=
			</data>
			<key>InfoPlistPatch</key>
			<true/>
			<key>Name</key>
			<string>com.apple.driver.AppleIntelLpssI2CController</string>
			<key>Replace</key>
			<data>
			U1U5TGFYTT0=
			</data>
		</dict>

[Ezekiel1998]

Dear onemanosx,

use your edited Dsdt, voodooI2cHID and voodooI2C kexts and the clover patch .But the i2c trackpad and thunderbolt also not working ;(

[onemanosx]

[ref]Ezekiel1998[/ref], extract new send me. Also, there are some ssdts/kexts in your folder i am not familiar with and has no idea what they do.

Might also need to rebuild cache and permissions and reboot again for trackpad to work.

Uncheck this option too

https://imgur.com/OixkqsS

What thunderbolt device are you plugging in? Plug in device before boot OS. TB will not work with hot plug method in hackintosh

[Ezekiel1998]

U mean extract a new dsdt from clover?

I rebuild cache and permissions and reboot again. The trackpad seem work in voodoops2 not i2c.(Remove ps2 kext the trackpad and keyboard will not work)

Thunderbolt device I just use the type c to lightning cable for iPhone. It can't connect.

[onemanosx]

[ref]Ezekiel1998[/ref], http://Olarila.com/files/Utils/RunMe.app.zip