Mojave / Catalina on GA-Z370 HD3 + i7-8700K / FULL DSDT Patch

[MaLd0n]

[ref]diamonddust[/ref], use bios/uefi in default, just enable intelhdgraphics

the correct config intelhd don't appears here

u see in ioreg just for hardware accel

[diamonddust]

MaLd0n ok went back to

IntelGFX 0x59128086

ig-platform-id 0x59120003

and Graphics/Display it's correct

Bios/UEFI is default and CSM disable and intelhdgraphics enable

[MaLd0n]

[ref]diamonddust[/ref],

[diamonddust]

MaLd0n one last question I forgot and than I will not bug you

For Hackintool USB patching it's suggest to edit config.plist and add the EHCI1, EHC2, XHCI and XHC1 like this:

 

should I remove them now that USB it's been fixed?

can I private sent you the boot verbose?

if it's ok with you and time it's ok will post a [Guide] for the GA Z370N Wifi

[MaLd0n]

[ref]diamonddust[/ref],

change GFX0 to IGPU
47465830 
49475055 

change HDAS to HDEF
48444153 
48444546 

change HECI to IMEI
48454349 
494d4549 

change SAT0 to SATA
53415430 
53415441 

change GLAN to GIGE
474c414e
47494745

[diamonddust]

got it cheers !

[jcmrdc]

Hello guys,

Greetings from Brazil! Where is the download link for the DSDT file? I've looked all over and I can't find it... Thanks for your help.

Jay Cee.

[erroruser]

you have to use the runme app an upload the zip file to this forum

http://Olarila.com/forum/viewtopic.php?f=19&t=1131

[EDV11]

Hello

I tried using your DSDT or EFI folder but it did not work for me. It hangs with this message

I have configured the BIOS with the recommended options.

My setup is:

Z370 HD3 BIOS F10

i5 8400

Sapphire R580 Nitro 8GB

16GB DDR4

If I use a generic EFI I can boot and everything works fine, but the USB are not working. Devices are only detected if they are connected at boot, but if I plug them off/on nothing happens.

I use Mojave 10.14.3. Has something changed lately with the DSDT?

Send me iMac-de-Eduardo.zip

Edited March 18, 2019 by Guest

[erroruser]

[ref]EDV11[/ref], you dont use other users dsdt you can block it in clover to boot back hit "O" then go to ACPI patching dsdt name change to BIOS.aml an you should be able to boot back on an you should use clover folders from here https://Olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip

for changing the dsdt to bios here is also a guide http://Olarila.com/forum/viewtopic.php?f=28&t=9303

Added in 3 minutes 26 seconds:

to run me app watch here

">

[EDV11]

Thanks. I went back to the EFI folder that allows me to boot up. I have added the Send Me file in the previous post

[MaLd0n]

[ref]EDV11[/ref], DSDT.aml.zip

[EDV11]

[ref]EDV11[/ref], DSDT.aml.zip

 

Thanks!

I've been testing it for some hours but I found that I have trouble with wake after sleep. The fans start spinning but there is no image. It responds to ping from a different computer, but I can't log through screen sharing and I have to force power off and restart.

[MaLd0n]

[ref]EDV11[/ref], strange

[EDV11]

I do have the Lilu.kext and WhateverGreen.kext in Other folder, boot argument with shikigva=40 and nothing in Graphics

[MaLd0n]

[ref]EDV11[/ref], shikigva=60 with IntelHD enable in bios/uefi

[EDV11]

[ref]EDV11[/ref], shikigva=60 with IntelHD enable in bios/uefi

 

Thanks, I'm going to try it.

Also, when I uploaded the SendMe files I was using a PCI WiFi/Bluetooth that I have removed (now the computer is connected using LAN). But I see the WiFi icon showing there is no hardware installed. Could this be related?

Added in 9 minutes 54 seconds:

same issue with shikigva=60

[EDV11]

Also, I forgot to send you a beer! Sent now

[EDV11]

I've tested without DSDT and it's also the same, it won't come back after sleep. Also, it takes a really long time for boot.

I'm attaching my Clover folder

CLOVER.zip

[MaLd0n]

[ref]EDV11[/ref], post send me