Mojave / Catalina on GA-Z370 HD3 + i7-8700K / FULL DSDT Patch

Q: What is a Hackintosh?

A Hackintosh is a non-Apple computer that runs macOS using compatible hardware and custom bootloaders such as OpenCore or Clover.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple's macOS license agreement. It is generally used for educational and experimental purposes.

Q: What hardware is best for Hackintosh?

Intel CPUs with compatible chipsets and supported AMD GPUs are typically best for Hackintosh. Hardware compatibility is critical for stability and performance.

Q: What is OpenCore in Hackintosh?

OpenCore is a modern bootloader used to boot macOS on non-Apple hardware. It provides better compatibility, security, and system stability than older bootloaders.

Q: Can Hackintosh be updated like a real Mac?

Hackintosh systems can be updated, but updates should be done carefully. Bootloader, kexts, and configuration files often need updates before installing new macOS versions.

Q: Is Hackintosh suitable for professional work?

A properly configured Hackintosh can be stable enough for professional tasks such as software development, audio production, and video editing, depending on hardware compatibility.

Q: Does Hackintosh support Intel and AMD processors?

Hackintosh supports both Intel and AMD processors, although Intel systems generally offer broader compatibility and easier configuration.

Q: Can macOS run faster on Hackintosh than on a Mac?

In some cases, high-end Hackintosh hardware can outperform older Macs, but performance depends on hardware choice, configuration quality, and macOS compatibility.

wanekk · July 21, 2018

Thanks Maldon, your new DSDT example without errors.

In general, the system with your DSDT works more smoothly.

System 10.13.6 (build for coffelake 17G2112), bios F8

skav · July 21, 2018

Post by MaLd0n » 21 Jul 2018, 16:40

skav wrote: ↑

Hi Maldon,

good morning, in this case without DSTS and unchecked dropOEM, ethernet work but no audio device appears.

Send you new extraction.

CLOVER.zip

(1.4 MiB) Downloaded 2 times

Many Thanks , all work !!

I send you a beer !!!!

I'll contact you in case of need

MaLd0n · July 21, 2018

Thanks Maldon, your new DSDT example without errors.

In general, the system with your DSDT works more smoothly.

System 10.13.6 (build for coffelake 17G2112), bios F8

Enjoy!

MaLd0n · July 21, 2018

Many Thanks , all work !!

I send you a beer !!!!

I'll contact you in case of need

k

let me know

skav · July 22, 2018

Unread post by MaLd0n » 21 Jul 2018, 23:48

skav wrote: ↑

Many Thanks , all work !!

I send you a beer !!!!

I'll contact you in case of need

k

let me know

Hi,

I forgot to ask you if I re-enable Drop OEM.

Thanks

MaLd0n · July 22, 2018

Hi,

I forgot to ask you if I re-enable Drop OEM.

Thanks

don't use it more

faceman1234 · July 26, 2018

don't use it more

Dear Admin, first of all thanks for letting me join, I forgot my old pw for other account so made another one ( sorry in advance) secondly i require help with a hackintosh build ( i am even willing to pay for help ) my specs are

8700K

16GB LPX 3200MHZ RAM CORSAIR

Z370 - HD3

EVGA GTX 1070 SUPERCLOCK

Is there any guide whhich breaks down step by step for brain dead people like me ? also how do i install drivers etc for this motherboard and graphics card, please help

MaLd0n · July 26, 2018

Dear Admin, first of all thanks for letting me join, I forgot my old pw for other account so made another one ( sorry in advance) secondly i require help with a hackintosh build ( i am even willing to pay for help ) my specs are

8700K

16GB LPX 3200MHZ RAM CORSAIR

Z370 - HD3

EVGA GTX 1070 SUPERCLOCK

Is there any guide whhich breaks down step by step for brain dead people like me ? also how do i install drivers etc for this motherboard and graphics card, please help

u have a system installed?

faceman1234 · July 26, 2018

u have a system installed?

Hi sorry no system installed - which would be the best? thanks - I will be happy to donate once i have a system working i really am grateful

MaLd0n · July 26, 2018

Hi sorry no system installed - which would be the best? thanks - I will be happy to donate once i have a system working i really am grateful

https://Olarila.com/forum/viewtopic.php?f=51&t=6569

faceman1234 · July 26, 2018

https://Olarila.com/forum/viewtopic.php?f=51&t=6569

thanks man, i will download that and install, once i have installed macos how do i install everything on this thread for my motherboard and gfx 1070? thanks

MaLd0n · July 26, 2018

thanks man, i will download that and install, once i have installed macos how do i install everything on this thread for my motherboard and gfx 1070? thanks

Install Clover bootloader and use my Clover folder from first post

faceman1234 · July 26, 2018

Install Clover bootloader and use my Clover folder from first post

i downloaded the image beta 4 mac osx, when do i install cloverbootloader? and where do i put your clover folder in the usb? sorry about this i am a complete newb

MaLd0n · July 26, 2018

i downloaded the image beta 4 mac osx, when do i install cloverbootloader? and where do i put your clover folder in the usb? sorry about this i am a complete newb

the image have all, just boot

fred24111 · July 27, 2018

Hi,

I have the exact same setup as you.

Z370-HD3 firmware F8a, with 32gb Ram, Sapphire 580 Nitro+. Could you please share your Bios settings and latest EFI and config.plist that works with Mojave Beta 4 and 10.13.6 if you have those.

I have downloaded the Olarila Mojave Beta 4 image but it seems to hang after AppleHDAEngineOutput with message Endpoint has been activated through legacy API's?? Would I be better staying on High Sierra?

Many thanks for any help

Allan · July 27, 2018

Z370-HD3 firmware F8a

There's a new version. F8 launched 07/13

You'll have much less errors.

MaLd0n · July 27, 2018

Hi,

I have the exact same setup as you.

Z370-HD3 firmware F8a, with 32gb Ram, Sapphire 580 Nitro+. Could you please share your Bios settings and latest EFI and config.plist that works with Mojave Beta 4 and 10.13.6 if you have those.

I have downloaded the Olarila Mojave Beta 4 image but it seems to hang after AppleHDAEngineOutput with message Endpoint has been activated through legacy API's?? Would I be better staying on High Sierra?

Many thanks for any help

Update bios to F8 final, disable serial port, enable intelHD Graphics and disable csm, only it, after install send me files

RunMe.app

fred24111 · July 27, 2018

Hi MaLd0n,

I have updated to F8. So those are the only settings I change? I selected Load Optimised Defaults then disabled serial, enabled hd graphics and disabled csm, but the Olarila Mojave B4 disk stops very quickly saying Single Ram now???

MaLd0n · July 27, 2018

Hi MaLd0n,

I have updated to F8. So those are the only settings I change? I selected Load Optimised Defaults then disabled serial, enabled hd graphics and disabled csm, but the Olarila Mojave B4 disk stops very quickly saying Single Ram now???

send me one photo with error

fred24111 · July 27, 2018

It is just hanging at this point

MaLd0n · July 27, 2018

It is just hanging at this point

Olarila Mojave beta 4 don't use fakesmc sensors

remove fakesmc sensors and use this version

FakeSMC.kext.zip

faceman1234 · July 28, 2018

can somebody help me please install all the files for z370 hd3?

i have installed nvidia drivers, i just require the DSDT and kexts if relevant to be installed i am a complete newbie

thanks in advance, if possible please do it for me over teamviewer

MaLd0n · July 28, 2018

can somebody help me please install all the files for z370 hd3?

i have installed nvidia drivers, i just require the DSDT and kexts if relevant to be installed i am a complete newbie

thanks in advance, if possible please do it for me over teamviewer

extract DSDT and send me

faceman1234 · July 29, 2018

Hey bro I've just installed the Mac OS HIGH SIERRA 10.13.6 ON MY Z370 HD3 - can you please help me with all the important stuff to make everything work? I've uploaded my SENDME.zip

Send me rs-iMac.zip

MaLd0n · July 29, 2018

Hey bro I've just installed the Mac OS HIGH SIERRA 10.13.6 ON MY Z370 HD3 - can you please help me with all the important stuff to make everything work? I've uploaded my SENDME.zip

CLOVER.zip

use this folder, reboot and extract new SEND_ME

Sign In

Mojave / Catalina on GA-Z370 HD3 + i7-8700K / FULL DSDT Patch

Recommended Posts

wanekk

skav

MaLd0n

MaLd0n

skav

MaLd0n

faceman1234

MaLd0n

faceman1234

MaLd0n

faceman1234

MaLd0n

faceman1234

MaLd0n

fred24111

Allan

MaLd0n

fred24111

MaLd0n

fred24111

MaLd0n

faceman1234

MaLd0n

faceman1234

MaLd0n

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity