Mojave 10.14

[pernacabeluda]

Try this version of AppleALC and layout-id 56.

[zeg66]

I want to try this on my pc. After I burn the image to a usb stick and I want to update clover, should I backup any files from the EFI folder before I update clover and copy them back again after? Will the clover update overwrite or delete any of the original files in the image?

[pernacabeluda]

Clover installer won't replace config, just Clover itself and selected drivers. Anyway, old files are saved in EFI-Backups folder.

[zeg66]

Thank you for clearing that up. Will try it soon and report back.

[zeg66]

mobo H170M-E D3, cpu i3-6100, graphics HD530.

installer hangs at point shown in picture. updated clover to 4533. it still hangs at the same point.

[MaLd0n]

mobo H170M-E D3, cpu i3-6100, graphics HD530.

installer hangs at point shown in picture. updated clover to 4533. it still hangs at the same point.

u try with -x(safe mode)?

[zeg66]

Hello Mald0n, I tried with -x and it reboots very soon, probably some KP, it all happens too fast.

[MaLd0n]

Hello Mald0n, I tried with -x and it reboots very soon, probably some KP, it all happens too fast.

press O key, go to Graphics and uncheck InjectIntel

[zeg66]

it is already unchecked. I have a good working 10.13.5 installation on the same hardware (mechanical hard disk, HFS+J). Could I copy some files from it to the 10.14 usb to help it get past this problem?

[MaLd0n]

if stay uncheck, check and clover inject a properties

[zeg66]

I set FakeID=0x12345678 and it worked. I have now installed it on an apfs ssd. What should I do post-install?

[MaLd0n]

I set FakeID=0x12345678 and it worked. I have now installed it on an apfs ssd. What should I do post-install?

same files from High Sierra

u can check here too

http://Olarila.com/forum/viewtopic.php?f=50&t=6254

[zeg66]

I can no longer mount the EFI partition with "diskutil mount /dev/disk0s1"

there are no audio devices running (Realtek® ALC887-VD2 8-Channel High Definition Audio CODEC)

graphics are too slow and choppy, screen fonts are, well....

not sure how to patch DSDT's

[MaLd0n]

try with clover configurator last version

[zeg66]

Thank you Mald0n, I tried Clover Configurator too. Still no sound. Update: The system boots with no Clover BootArgs at all. I can mount EFI partition OK. For audio: the method I used for 10.13.3, 10.13.4, 10.13.5 does _not_ work with 10.14 (Lilu, AppleALC, HDEF/HDAS, Inject 2, ResetHDA). Graphics show _no_ transparency and are sometimes very slow. However the system appears quite fast and shuts down instantly, good.

[MaLd0n]

Thank you Mald0n, I tried Clover Configurator too. Still no sound. Update: The system boots with no Clover BootArgs at all. I can mount EFI partition OK. For audio: the method I used for 10.13.3, 10.13.4, 10.13.5 does _not_ work with 10.14 (Lilu, AppleALC, HDEF/HDAS, Inject 2, ResetHDA). Graphics show _no_ transparency and are sometimes very slow. However the system appears quite fast and shuts down instantly, good.

YES, is my principal system now, beta 1 Mojave xD

[zeg66]

But the trick is to make it work on much lower cost hardware, like mine for example, or even lower, if possible

[MaLd0n]

send me ur clover folder, ioreg and dsdt

[jihamine]

hi, thank u for all you do , I can not download Mac OS Mojave 14 beta in App Store I receive this message this version of Mac OS can not be installed on this computer

my config is

high Sierra 10.13.6 beta

hp prebook 4530s I 5

ram 8giga

intel hd 3000

thank's a lot

[MaLd0n]

hi, thank u for all you do , I can not download Mac OS Mojave 14 beta in App Store I receive this message this version of Mac OS can not be installed on this computer

my config is

high Sierra 10.13.6 beta

hp prebook 4530s I 5

ram 8giga

intel hd 3000

thank's a lot

http://Olarila.com/forum/viewtopic.php?f=51&t=6399