Hackintosh Guide - El Capitan / Sierra / High Sierra / Mojave / Catalina on LGA 775 mobos with Clover Bootloader

[Salsacock]

Hi there,

I tried watching the YouTube tutorial for the LGA775 but unfortunately it seems like it was removed ...

After making the boot-able USB stick, I tried booting from the USB but I get a black screen with a '-' on the upper left corner and nothing happens afterwards is there something that I can do ?

I'm not sure if I'm doing something wrong or some of my hardware is not compatible ....

What settings do I need to change in the bios ?

My setup is :

Motheboard : Gigabyte GA-G31M-ES2C

CPU : Xeon x5460

GPU : GeForce GT 730

Ram : 2GB

[MaLd0n]

[ref]Salsacock[/ref], High Sierra? install clover for legacy

[bor72]

ok, thanks ,use raspy=15,result-nothing

Added in 1 minute 41 seconds:

maybe to try add real id of my gnu (not fake id)in drivers 4000 and 7000?

[MaLd0n]

[ref]bor72[/ref], i never use ur GPU, read instructions here

https://github.com/acidanthera/WhateverGreen

[Salsacock]

install clover for legacy

 

MaLd0n, I'm trying to install Mojave and not High Sierra...

I didn't understand the part about installing clover for legacy, I'm not sure where to install clover, and I don't understand what does legacy mean ...

[MaLd0n]

ur mobo is not UEFI

use it

[ColaCoca]

I’m so confused, what I tried to do is install moiave from a bootable usb stick.

Here is what I did from the begining : download majave final and then made a bootable usb stick for mojave afterwards I tried booting from the USB and I get stuck on a black screen.

After seeing your reply I downloaded clover and made a bootable clover usb and I tried booting into mojave from there but I get the same black screen or a screen with a Forbidden sign in the center.

I’m not sure what else to do, is there something that I need to change in clover boot settings (args) or something that I need to change in the bios ?

[MaLd0n]

[ref]ColaCoca[/ref], use high sierra, for mojave u need a some changes

[sabbirbd]

"Youtube MacOS Install Guide Olarila" is dead (Video unavailable

"Hackintosh Guide - MacOS In..." is no longer available due to a copyright claim by Apple Inc.)

Please re-upload this video to another site, so we can download it then play

Thanks

[MaLd0n]

[ref]sabbirbd[/ref], i'll update in next week

[ColaCoca]

ColaCoca, use high sierra, for mojave u need a some changes

Well, I downloaded High Sierra and used etcher to make a bootable USB and I was able to boot into it and I think I began the installation and then it crashes :

https://gyazo.com/3d534ff36070e32074468bf657d6fd51

https://gyazo.com/16033d112ee5fc7495d6aae7c7f62a62

What do you think I should do ??

My hardware :

Motheboard : Gigabyte GA-G31M-ES2C

CPU : Xeonx5460

GPU : GeForce GT 730

RAM : 2GB

[MaLd0n]

[ref]ColaCoca[/ref], i think is a sata problem, g31 is a simple ich7 and don't have AHCI option

u can try other usb port too

[ColaCoca]

ColaCoca, i think is a sata problem, g31 is a simple ich7 and don't have AHCI option

u can try other usb port too

 

I'm not sure I understand, What do you mean a sata problem, what does it mean AHCI ??

For now I will try an other USB port and tell you what happens ...

[MaLd0n]

ahci is a sata mode mandatory for OSX, but g31/ich7 chipset don't have this option, but work in many cases

[ColaCoca]

u can try other usb port too

Using a different USB port solved the problem.

 

ahci is a sata mode mandatory for OSX, but g31/ich7 chipset don't have this option, but work in many cases

 

So at least it could work ??

Well , now I booted into the installation of the Hackintosh, and I get to the part where I have to choose a drive to install the Hackintosh on, but for some reason my drives/hard drives never show up not even in the disk utility (I did click on the show all drives/disks), What can I do ??

Edit : I did try removing all the old partitions on the hard disk and re-formatting it, but nothing worked.

[MaLd0n]

[ref]ColaCoca[/ref], enable patch ALPM IO Error AppleAHCIPort in config.plist

[Salsacock]

ColaCoca, enable patch ALPM IO Error AppleAHCIPort in config.plist

Enabled it, but still the same can't see any of the devices, hard drives, partitions except for the USB device.

[MaLd0n]

[ref]Salsacock[/ref], ye, the patch above is for ahci, forget it

[Salsacock]

Just to confirm something I have both the accounts of Salsacock and ColaCoca, So I don't make any confusion ...

 

Salsacock, ye, the patch above is for ahci, forget it

 

So that means I won't be able to install High Sierra on my Hard-drive ??

if the answer is no, then is there any Hackintosh that I can install on my Hard-Drive??

Also, I know that it's not efficient at all, but what if I install the Hackintosh on a USB stick (Since USB sticks do show up...) ?

[MaLd0n]

[ref]Salsacock[/ref], take one shot with old system like el Capitan

[ColaCoca]

Attempting to install el capitan, stuck on “DSMOS has arrived”...

Above “DSMOS has arrived” it says missing Bluetooth controller....

What should I do ?

Edit : enabled disable nvidia, it booted into installation.

Edit 2 : still have the same problem that the drives won’t show up in the disk utility...

[MaLd0n]

[ref]ColaCoca[/ref], no idea

[bor72]

[ref]MaLd0n[/ref], Thanks1) didnt work,but when i m installing older version of this patch,all was good,but with newer version i cant load my hack.

2) I tied your plist and usb still working after shutdown,i install external hard drive and led lamp still lighting after reboot,when im using windows all ok.i m using google to read how install r9 270x (id 6811102) and nothing...when i change my ati to my old card (nvidia 8600gt all good)

3) do you know how makes work clover in 1920x1080 in clover menu?thanks

[MaLd0n]

[ref]bor72[/ref], post one photo with error screen

[bor72]

[ref]MaLd0n[/ref], error screen with WG?how about NVIDIA,can you help me?what arg i must select in clover for maximum resolution of my monitor?