Hackintosh Guide - El Capitan / Sierra / High Sierra / Mojave / Catalina on LGA 775 mobos with Clover Bootloader

[MaLd0n]

[ref]newinnov[/ref], DSDT.aml.zip

[newinnov]

Thank you very much. It worked.

But sleep issue still remains, on sleep only monitor goes off, all USB ports, fan and cpu remains active

[papahonda2019]

Hi,

I've tried to install the Olarila Mojave image to my old PC. It's a Core 2 Duo E6750 2.66GHz and NVIDIA GeForce GT 520 on Asus P5KC crossflashed to P5KR.

After burning the image to USB flash, I booted and managed to reach the clover but every time I hit the "boot with the selected options", it always restarts. I've checked verbose and block VoodooTSCSync.kext. My current OS is El Capitan 10.11.4 (15E65) and it's working fine. I need to upgrade to at least Sierra due to app compatibility.

Would you please tell me what should I do to make this work? Thank you...

[MaLd0n]

[ref]papahonda2019[/ref], sierra need sse4,1, check ur processor spec

[papahonda2019]

sierra need sse4,1, check ur processor spec

Hi MaLd0n, thanks for the reply.

Oh my bad.. I knew it's not supported, but I thought you've created some kind of patch for that when I see LGA 775 is supported by Olarila.

Is it going to work if I replace the processor with the modded Xeon and keep using my mobo? Or what's the best option for me to install newer macOS than El Capitan?

Thank you...

[dickymuliafiqri]

I'm trying to install Catalina, but at Disk Utility is show nothing except my USB Stick Installer (No SATA Drive/Hard Disk)

LGA775

C2D E8500

Nvidia GT710 (Kepler)

[nvanh1804]

Hello

Can you Patch this for me???

My problem:

-Audio ALC888s not working

- Shutdown problem

Thanks a lots

http://s000.tinyupload.com/index.php?fi ... 5208159095

[MaLd0n]

[ref]nvanh1804[/ref], wrong link

[nvanh1804]

Please help me to patch this. I'm so sorry with the wrong link yesterday

File: http://s000.tinyupload.com/index.php?file_id=00387732148795171956

Thanks for your help!

[MaLd0n]

[ref]nvanh1804[/ref], check other topic, use only one, ur dsdt edited is there

[redjulius]

Hello Good afternoon, the installer starts on two PCs (Gigabyte GA-G31M-ES2l integrated VGA and Foxconn H61mxe DVI for GeForce 210) but after the installation starts I get an error "No packages suitable for installation have been detected"

I attach the photos:

[MaLd0n]

[ref]redjulius[/ref], burn Olarila image again

[redjulius]

redjulius, burn Olarila image again

 

Ok, I'm downloading it again, I had downloaded it from Mavericks and burned it to a usb with Balena Etcher, then moved it to another hard drive to format the Mavericks with the Olarila El Capitan, but I think the .bz2 was damaged so like the .raw. I will wait, I will burn it with the win32 from Windows 10 and hopefully I will answer you from Olarila El Capitan, Thank you.

[MaLd0n]

[ref]redjulius[/ref], u need extract .bz2 to .raw before burn

[redjulius]

redjulius, u need extract .bz2 to .raw before burn

 

Of course, I downloaded it again, I unzipped it with 7-Zip, I burned it with Win32, all good, but I still get the error "No packages suitable for installation have been detected"

[MaLd0n]

[ref]redjulius[/ref], create one personal usb stick

[redjulius]

MaLd0n, I follow this guide to create the USB: https://Olarila.com/forum/viewtopic.php?f=50&t=8685

what would a "one personal USB stick" be like?

Edited December 4, 2019 by Guest

[MaLd0n]

[ref]redjulius[/ref], https://Olarila.com/forum/viewtopic.php?p=83664#p83664

[redjulius]

redjulius, viewtopic.php?p=83664#p83664

 

Can I use the installer inside Olarila El Capitan? Or do I have to download the MacOS App Store version?

[MaLd0n]

[ref]redjulius[/ref], u can use efi folder