Gigabyte H61M-D2-B3 macOS 10.13 slow sleep + bad wake

[Borriel_69b]

Ok I removed voodoohda but I'd have to keep AppleHDAdisabler.kext coz although Hsierra starts is very very slow.

Now I have AppleALC sound but wake after a sleep doesn't work. No difference with voodoohda.

One question: Has "SSDT.aml" be placed on the same folder as "DSDT.aml"?

[MaLd0n]

Ok I removed voodoohda but I'd have to keep AppleHDAdisabler.kext coz although Hsierra starts is very very slow.

Now I have AppleALC sound but wake after a sleep doesn't work. No difference with voodoohda.

One question: Has "SSDT.aml" be placed on the same folder as "DSDT.aml"?

Yes, same folder

[Borriel_69b]

Finally I found a solution from other forum. I just added two patches to AppleAHCIPort.kext via clover Kexttopatch: fix I/O error for ICH10 (2 parts).

Now I have sleep+wake. No HDD hanging or autoeject. All seems to work ok. All my "Sierra" settings are the same.

These are the new patches (apart from one for "Orange internals icons" that I had in Sierra).

 

                       <dict>
			<key>Comment</key>
			<string>fix I/O error for ICH10</string>
			<key>Disabled</key>
			<false/>
			<key>Find</key>
			<data>
			RYX2D5XCiciD4P5mhcl4D4TSdQs=
			</data>
			<key>Name</key>
			<string>AppleAHCIPort</string>
			<key>Replace</key>
			<data>
			iciD4P5mhckPmMFBCMyQkJCQdQs=
			</data>
		</dict>
		<dict>
			<key>Comment</key>
			<string>fix I/O error for ICH10</string>
			<key>Disabled</key>
			<false/>
			<key>Find</key>
			<data>
			icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA=
			</data>
			<key>Name</key>
			<string>AppleAHCIPort</string>
			<key>Replace</key>
			<data>
			kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA=
			</data>
		</dict>

 

I have my internal Intel Graphic card disabled in BIOS. I use a "cheap" Geforce GT210 dedicated videocard.

Mald0n: you recommended to change VoodoHDA to lilu+AppleALC but It doesn't work in my case because I don't use any DSDT.aml (nor SSDT.aml) which is mandatory because AppleALC.kext needs a right "layout-id" from DSDT.aml.

I found a DSDT.aml which works with my computer (I attach here. I think it's the same from my fisrt post). Can anyboby patch this DSDT.aml to give a right "layout-id" to AppleALC?

Thanks!!

DSDT.zip

[Allan]

You can use AppleALC + Lilu and remove the VoodooHDA. Or use only VoodooHDA.

The correct layout-id to your codec is:

 

Put the value at Devices > Audio: https://clover-wiki.zetam.org/Configuration/Devices#devices_audio

[MaLd0n]

Finally I found a solution from other forum. I just added two patches to AppleAHCIPort.kext via clover Kexttopatch: fix I/O error for ICH10 (2 parts).

Now I have sleep+wake. No HDD hanging or autoeject. All seems to work ok. All my "Sierra" settings are the same.

These are the new patches (apart from one for "Orange internals icons" that I had in Sierra).

CODE: SELECT ALL

Comment

fix I/O error for ICH10

Disabled

Find

RYX2D5XCiciD4P5mhcl4D4TSdQs=

Name

AppleAHCIPort

Replace

iciD4P5mhckPmMFBCMyQkJCQdQs=

Comment

fix I/O error for ICH10

Disabled

Find

icglQGACAD1AIAAAdQyB4b9///+Ji1EBAAA=

Name

AppleAHCIPort

Replace

kJCQkJCQkJCQkJCQkJCQkJCQkJCQkJCQkJA=

I have my internal Intel Graphic card disabled in BIOS. I use a "cheap" Geforce GT210 dedicated videocard.

Mald0n: you recommended to change VoodoHDA to lilu+AppleALC but It doesn't work in my case because I don't use any DSDT.aml (nor SSDT.aml) which is mandatory because AppleALC.kext needs a right "layout-id" from DSDT.aml.

I found a DSDT.aml which works with my computer (I attach here. I think it's the same from my fisrt post). Can anyboby patch this DSDT.aml to give a right "layout-id" to AppleALC?

Thanks!!

not a good DSDT, use my dsdt with ahci patch

[Borriel_69b]

Thanks for the info!

@Allan: only id 11 and 12 work. One shows headphones only and the other internal only. Is there a way to show both when using AppleALC? I also see the audio entries in Turkish. Why?

@MalD0n: the DSDT provided by you makes my system load in 5:30 min. If I use my DSDT or none it only takes 2:00 minutes. Althought your DSDT shows earphones and internal when using AppleALC kext, my system doesn't wake from sleep properly. I need to restart computer with power button.

[MaLd0n]

something wrong in ur system

use all kexts in clover/kexts/other, only there

post one log with my DSDT

log show --last boot --style syslog

[Borriel_69b]

Here it is.

log.txt.zip

[MaLd0n]

Here it is.

send me ur clover folder and one full dump with app

RunMe.app

[Borriel_69b]

Ok. Attached.

CLOVER.zip

Send me PC4.zip

[MaLd0n]

Ok. Attached.

CLOVER.zip

check if work

sleep use power button for wake, if work i enable wake from mouse/keyboard

[Borriel_69b]

Hi. Now boot time is good (2 minutes). Audio is ok (although titles in Turkish...). Sleep is ok but wake fails.

I attach new Send_me files and last-boot log.

log.txt.zip

Send me PC4.zip

[MaLd0n]

Hi. Now boot time is good (2 minutes). Audio is ok (although titles in Turkish...). Sleep is ok but wake fails.

I attach new Send_me files and last-boot log.

what happens with wake?

u need disable trim, trim with apfs = slow boot

[Borriel_69b]

Hi. wow, you're right, boot time it only takes 30-35 seconds with trim disabled.

After a good sleep, when I press power button computer seems to start (fans noise and LEDs bright) but I get a black screen. It doesn't respond to Kb/Mouse. I see nothing on screen, only black. I have to powerOff.

I attach new Send_me files an last-boot log.

log.txt.zip

Send me PC4.zip

[MaLd0n]

Hi. wow, you're right, boot time it only takes 30-35 seconds with trim disabled.

After a good sleep, when I press power button computer seems to start (fans noise and LEDs bright) but I get a black screen. It doesn't respond to Kb/Mouse. I see nothing on screen, only black. I have to powerOff.

I attach new Send_me files an last-boot log.

take a last shot

DSDT.aml.zip

[Borriel_69b]

No luck