Sierra Olarila 10.12.6 hackintosh

Q: What is a Hackintosh?

A non-Apple computer configured to run macOS using compatible PC hardware combined with a custom bootloader and configuration files to emulate a real Mac environment.

Q: Is building a Hackintosh legal?

Installing macOS on non-Apple hardware violates Apple’s End User License Agreement (EULA). It is generally not illegal for personal experimentation but not permitted for commercial use.

Q: What hardware is best for a Hackintosh?

The best hardware closely matches real Apple systems, with Intel CPUs (6th Gen to Core Ultra), AMD Radeon GPUs, compatible chipsets, and Intel-based Wi-Fi cards offering higher success rates.

Q: Can I build a Hackintosh with an AMD CPU?

Yes, macOS can run on AMD Ryzen CPUs using kernel patches, but Intel CPUs provide better native compatibility.

Q: What is OpenCore?

OpenCore is a modern Hackintosh bootloader that provides near-native macOS behavior and is the recommended bootloader for new installations.

Q: Is Clover still supported?

Yes, Clover is still supported but less recommended compared to OpenCore for modern systems.

Q: Which macOS versions support Hackintosh?

Hackintosh systems support macOS versions from Leopard up to recent releases, depending on hardware compatibility.

Q: Do NVIDIA graphics cards work on Hackintosh?

Only older NVIDIA GPUs work on older macOS versions; modern NVIDIA GPUs are incompatible with current macOS releases due to lack of driver support.

Q: What is an EFI folder?

The EFI folder contains the bootloader, drivers, kexts, and configuration files required to boot macOS on a Hackintosh.

Q: What are kexts?

Kexts (kernel extensions) are drivers that enable hardware functionality such as audio, Ethernet, USB, and graphics.

Mohanmp3 · August 23, 2018

when i boot from bootable Olarila usb an error show

more detail available in attached image

Added in 19 minutes 3 seconds:

Olarila siera not boot in my laptop

MaLd0n · August 23, 2018

when i boot from bootable Olarila usb an error show

more detail available in attached image

Added in 19 minutes 3 seconds:

Olarila siera not boot in my laptop

u can create ur personal installer, check our app, have all info there

Olarila APP

ahmedkiko · August 29, 2018

no keyboard and mouse detected to finish step install

MaLd0n · August 29, 2018

U need fix it if don't work, via dsdt or one injector, what chipset?

ahmedkiko · August 29, 2018

i installed in my pc evry week but now stuck in finsh last install

my pc core 2 duo ... hp dc 7900

8400 gs 512 nivida .... 6g ram

MaLd0n · August 29, 2018

check bios config

ahmedkiko · August 29, 2018

i check my bios and try install again .. arag worked for me evry time drao=0 and uncheck all dste

in first step install evrysting is work in final not work usb key and mouse

ahmedkiko · August 29, 2018

@MaLd0n

i install 10.12.6 but when restart after colver its boot and open but no mouse and key board deceted ???

MaLd0n · August 29, 2018

No idea, u need check bios config or drivers for clover or dsdt patch for fix it

Neo_1979 · October 2, 2018

Hello all, I have a problem with intel usb 3.0 ports.

My laptop is a Dell Mobile Workstation M6700:

cpu i7-3940xm extreme

qm77 chipset

24gb ram ddr3 1600mhz

nvidia quadro k3000m 2gb gdrr5 (I use this as my video card, optimus disabled in bios)

17,3" fullhd 1920x1080

ssd1 samsung 850 250gb (windows 10 os)

ssd2 crucial mx300 525gb (downloads)

ssd3 crucial mx300 750gb (caddy) (data and virtual machines)

ssd4 lite-on msata 256gb (sierra mac os)

5 usb ports:

2 usb 2.0 (work flowlessly)

1 usb/eSata combo port (work flowlessly)

2 usb 3.0 intel ports (work as 2.0 ports)

I can't figure it out to make 3.0 ports work at their full speed. Tried usbinjectall.kext and clover port limit patch for sierra (and rename ehc1 to eh01.....), nothing.

Tried dsdt.amd patching with 7-series/8-series usb, nothing (this method worked for other 2 laptops)

Tried fakepciid.kext + fakepciid_xhcimux.kext, nothing.

They always work as 2.0 ports. In profiler there are 2 usb 2.0 controllers ehci. Not an XHCI is shown/found.

Hope you can give me some advice to fix the problem.

MaLd0n · October 3, 2018

cpu i7-3940xm extreme

u need check if ur usb3 is intel, post ur dump here

RunMe.app

Neo_1979 · October 3, 2018

The picture shows how it is recognized under windows 10.

Here it is. Remember, I'm using NVIDIA QUADRO K3000M as video card.

Send me Neos-MBP.station.zip

MaLd0n · October 4, 2018

The picture shows how it is recognized under windows 10.

Here it is. Remember, I'm using NVIDIA QUADRO K3000M as video card.

DSDT.aml.zip

add in config.plist/acpi tab

change EHC1 to EH01
45484331
45483031

change EHC2 to EH02
45484332
45483032

use usbinjectall

Neo_1979 · October 4, 2018

Unfortunately, nothing changed

MaLd0n · October 4, 2018

send me new SEND_ME

Neo_1979 · October 4, 2018

Here it is

Send me Neos-MBP.station.zip

MaLd0n · October 4, 2018

u disable xhci(usb3) in bios?

check there

Neo_1979 · October 4, 2018

No, of course. I'm a pc technician since 13 years and I already thinked and verified that.

Also, in Windows they work properly.

MaLd0n · October 4, 2018

extract untouched dsdt with f4 key in clover boot screen, ill check if device exist

Neo_1979 · October 4, 2018

I attached all ORIGIN folder

origin.zip

Sign In

Sierra Olarila 10.12.6 hackintosh

Recommended Posts

Mohanmp3

MaLd0n

ahmedkiko

MaLd0n

ahmedkiko

MaLd0n

ahmedkiko

ahmedkiko

MaLd0n

Neo_1979

MaLd0n

Neo_1979

MaLd0n

Neo_1979

MaLd0n

Neo_1979

MaLd0n

Neo_1979

MaLd0n

Neo_1979

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity