Administrators MaLd0n Posted December 23, 2017 Author Administrators Posted December 23, 2017 I can't thank you wonderful people enough. I have Sierra fully working on my Dell Inspiron 660 desktop. It was so painless (I had a little bit of prior knowledge when it came to Clover and such so it was a breeze). I also have it on my main laptop! welcome enjoy -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
hpMac-dv6-6190 Posted March 12, 2018 Posted March 12, 2018 I downloaded this and ran it just now with the following flags: -v cpus=1 dart=0 slide=0. I got the apple logo, then the progress indicator filling slowly. Then I got the screen with the circle with the line through it. Any ideas?
Administrators MaLd0n Posted March 12, 2018 Author Administrators Posted March 12, 2018 I downloaded this and ran it just now with the following flags: -v cpus=1 dart=0 slide=0. I got the apple logo, then the progress indicator filling slowly. Then I got the screen with the circle with the line through it. Any ideas? i think the problem is about ur GPU try inject ATI -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
hpMac-dv6-6190 Posted March 12, 2018 Posted March 12, 2018 i think the problem is about ur GPU try inject ATI Still stuck. I have a general question. From the output, is it fair to say where it gets stuck is what the problem is? Do I just keep trying different boot settings till I finally figure out the right configuration? Thank you in advance!
pernacabeluda Posted March 12, 2018 Posted March 12, 2018 If you use -v flag (verbose) you should see boot messages instead of progress bar. If you get a "forbidden" symbol I guess it's a problem with USB (you should see "waiting for boot device" after a while in verbose mode). Try settings related to USB in Clover option (inject, ownership, DSDT fixes) and alternate between 2.0 and 3.0 ports if you have both. -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Consulting for macOS Hackintosh since 2006 HERE
hpMac-dv6-6190 Posted March 13, 2018 Posted March 13, 2018 my apologies for posting under another sierra install version, this is the one I actually am trying to install. I have been booting starting with just -v. It got stuck pretty fast. Then, i booted -v cpus=1. It seems to be getting stuck on my ethernet which is Realtek I can see by mounting the EFI partition that in clover\kexts\other i have RealtekRTL8111.kext which seems to be the right one from what I can tell by research. I added boot flag kext-dev-mod=1 which led me to believe it would load that kext. I could be wrong, I am a newbie to this. Here is the latest screen shot from the boot where it gets stuck.
Neo_1979 Posted April 25, 2018 Posted April 25, 2018 Hello, my hardware specifications: Toshiba Satellite P875 I7-3630QM Intel Hd Graphics 4000 24GB Ram DDR3 1600Mhz h76m chipset NVidia GT630m 1GB with optimus (dreaming using it instead of hd 4000) ssd1 samsug 850 pro 256gb ssd2 crucial mx300 525gb OS Sierra 10.12.6 Thanks in advance Send me.zip
Administrators MaLd0n Posted April 25, 2018 Author Administrators Posted April 25, 2018 Hello, my hardware specifications: Toshiba Satellite P875 I7-3630QM Intel Hd Graphics 4000 24GB Ram DDR3 1600Mhz h76m chipset NVidia GT630m 1GB with optimus (dreaming using it instead of hd 4000) ssd1 samsug 850 pro 256gb ssd2 crucial mx300 525gb OS Sierra 10.12.6 Thanks in advance DSDT.aml.zip USE change GFX0 to IGPU 47465830 49475055 change EHC1 to EH01 45484331 45483031 change EHC2 to EH02 45484332 45483032 -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Neo_1979 Posted April 25, 2018 Posted April 25, 2018 Thanks a lot! I did what you wrote. Noticed nvidia disabled by dsdt. What patch did you use? And must I remove acpi fixes in clover conf.plist? Question about audio: I use adummy.kext method. Often AppleHDA.kext is not loaded and even if I see the volume/speaker icon in the menu bar, I have no audio. In system prefs, it is correctly shown "internal speaker" "built-in". I repaired permission for kext folders, rebuilt the cache many time (with kext utility) but still having this problem. I'm booting with Ignore Cache option in Clover until it will be all ok.
Administrators MaLd0n Posted April 25, 2018 Author Administrators Posted April 25, 2018 Thanks a lot! I did what you wrote. Noticed nvidia disabled by dsdt. What patch did you use? And must I remove acpi fixes in clover conf.plist? Question about audio: I use adummy.kext method. Often AppleHDA.kext is not loaded and even if I see the volume/speaker icon in the menu bar, I have no audio. In system prefs, it is correctly shown "internal speaker" "built-in". I repaired permission for kext folders, rebuilt the cache many time (with kext utility) but still having this problem. I'm booting with Ignore Cache option in Clover until it will be all ok. dont Ignore Cache, u can try other id with apple alc or applehda patcher -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Neo_1979 Posted April 25, 2018 Posted April 25, 2018 I used applehda patcher and it says I have layout-id 3... and as soon as I installed, the audio was working. After some reboots, no audio. I sometimes replaced applehda.kext with a copy I saved as backup. And audio works again. Reboot is very often slow. When I click restart, it goes on black screen and wait 10-15 seconds before Toshiba logo appears again...
Administrators MaLd0n Posted April 25, 2018 Author Administrators Posted April 25, 2018 Restart is a Clover -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Neo_1979 Posted June 10, 2018 Posted June 10, 2018 Please help me... It's a Dell Mobile Workstation M6700: cpu i7-3940xm extreme 24gb ram ddr3 1600mhz nvidia quadro k3000m 2gb gdrr5 (optimus disabled in bios) 17,3" fullhd 1920x1080 ssd1 samsung 850 250gb ssd2 crucial mx300 525gb ssd3 crucial mx300 750gb (caddy) ssd4 lite-on msata 256gb Using only quadro gpu, not the integrated. I think it's a good configuration for a laptop Send me Neos-MacBook-Pro.zip
Administrators MaLd0n Posted June 10, 2018 Author Administrators Posted June 10, 2018 Please help me... It's a Dell Mobile Workstation M6700: cpu i7-3940xm extreme 24gb ram ddr3 1600mhz nvidia quadro k3000m 2gb gdrr5 (optimus disabled in bios) 17,3" fullhd 1920x1080 ssd1 samsung 850 250gb ssd2 crucial mx300 525gb ssd3 crucial mx300 750gb (caddy) ssd4 lite-on msata 256gb Using only quadro gpu, not the integrated. I think it's a good configuration for a laptop DSDT.aml.zip -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Neo_1979 Posted June 24, 2018 Posted June 24, 2018 Thanks for reply. With your dsdt.aml I can't reach desktop. System continues rebooting. Added my clover config.plist config.plist.zip
Administrators MaLd0n Posted June 24, 2018 Author Administrators Posted June 24, 2018 check if work with nv_disable -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Neo_1979 Posted June 25, 2018 Posted June 25, 2018 with nv_disable, of course, I can't reach desktop, because as I wrote I'm using nvidia quadro k3000m as gpu, not the intel hd 4000 (optimus disabled in bios).
Administrators MaLd0n Posted June 25, 2018 Author Administrators Posted June 25, 2018 enable ur nvidia -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
Mohanmp3 Posted August 21, 2018 Posted August 21, 2018 Please help me install Sierra Intel corei3 5005u 8gb ram 2tb hdd Intel hd5500 Intel WiFi
Administrators MaLd0n Posted August 21, 2018 Author Administrators Posted August 21, 2018 Please help me install Sierra Intel corei3 5005u 8gb ram 2tb hdd Intel hd5500 Intel WiFi what problem u have? -Guides and Tutorials HERE -Hackintosh Tutorial Database - HERE -The largest EFI folder collection for Hackintosh HERE -Support Olarila Vanilla Hackintosh by making a donation HERE -Professional Hackintosh Support since 2006 HERE
)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now