DSDT help patch request for Asus x99 board

[insideOut]

Hi All,

I have been trying to patch my m.2 Nvme Samsung 950 PRO 512 GB (Pci on board). My motherboard Asus ROG Rampage V Edition 10 x99.

I have tried to use the NvmeFix.kexts as well as the NvmExpressDxe.efi which still does not work. My m.2 drive simply refuses to show up in Disk utility even in the terminal.

I then created an SSDT-Bridge.aml as well as the DSDT.aml using SSDTTime, that for some reason still did not work. I have no idea on how to truly map PciRoot(0x0)/Pci(0x0,0x0)/Pci(0x0,0x0) as the ssd. I added the .aml files to the ACPI folder and updated the config.plist. It still did not work. I am using OpenCore

i tried to add it in the DeviceProperties section using ProperTree. After it got stuck booting with errors . I stopped immediately, i really do not want to brick my device and or board. 

Anyone with more experience help me with this please?

My end SMBios would be MacPro7,1  

I have attached my OC/ACPI folder as well as the OC/Drivers. My complete EFI folder is 8,75MB zipped.

Thank you for any assistance, it is truly appreciated  

 

OC.zip

Edited September 25, 2023 by iNeedHelp
corrected PciRoot

[MaLd0n]

Try this

EFI x99.zip

https://www.olarila.com/topic/20908-easy-fast-and-perfect-vanilla-hackintosh/

-Procedure-

-Bios/UEFI in full default settings(Just change settings if need)
-Delete old EFI folder and paste new. Don't use merge files
-Don't use Drag and Drop into EFI partition. Use Copy/Paste instead
-Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen

 

[insideOut]

Hi MaLd0n,

You sir are awesome, I applied the new EFI and it works, the drive now shows up and I can format and access it.

Although slight issue, the drive shows up as an external drive, is it possible to make it show up as an internal drive ?

 

Thank you for the steps you provided as well, I would have simply dragged and drop, instead of copying and pasting. x_x

[MaLd0n]

Save one ioreg 

[insideOut]

Quick question, how do I save an ioreg. I checked the ioreg but I'm not too sure on how to save one, as i never touched the ioreg when building the open core EFI.

 

Thank You

[MaLd0n]

With this app https://olarila.com/files/Utils/IORegistryExplorer.app.zip

Menu file, save

[insideOut]

You are awesome, I was just reading up about the open core pkg adding "built-in" but I prefer using your method.

1 minute ago, MaLd0n said:

With this app https://olarila.com/files/Utils/IORegistryExplorer.app.zip

Menu file, save

Quick question, should this be done after installation ? Lol

[MaLd0n]

After reboot with my EFI folder

[insideOut]

MaLdon, i cannot thank you enough. This worked perfectly. There were some bumps when it came to the GPU. Open Core Patcher was not able to install the post installation drivers due to SIP being enabled and AMFI.

After disabling AMFI using the bootarg "amfi_get_out_of_my_way=1" and setting SecureBootModel to "Disabled". Can i re-enabled SIP and the AMFI since the GPU and post-installation has been completed

Issues that i have noticed, if i leave the PC for a while it will goto sleep and immediately boot back. Then it would be in that cycle forever, until i actually move the mouse of show a sign of activity. 

Any ideas on how to solve this issue ?

 

Will be writing a post on my install for anyone that may require it or maybe for the future me lol. 

Quick question on how did you perhaps map the PciRoot device, i did notice the _DSM but im not certain if it was that and i do not want to touch it as this install is beautiful.  

 

EDIT: Forgot to mention that one of my Ethernet ports are not working as well as the bluetooth device does not work. I am unable to active the bluetooth nor the 1GB ethernet port

Edited September 26, 2023 by iNeedHelp
added additional errors

[bitwiseOP]

On 9/26/2023 at 11:03 AM, insideOut said:

@insideOut Enable debug logs and post them? full IOReg? We can't help without more info