Hackintosh Intel Wifi and Bluetooth on macOS

[MaLd0n]

Easy way to activate Intel Wifi and Bluetooth on macOS

 

-Professional Consulting for macOS Hackintosh since 2006 HERE

-Support Olarila Vanilla Hackintosh by making a donation HERE

-About Premium Users you can check HERE

-Problems with Paypal HERE

-Installation Guide HERE

-Hackintosh EFI folders HERE

-Hackintosh USB Remap HERE

-How to update OpenCore and Kexts HERE

-Guides and Tutorials HERE

-The largest EFI folder collection for Hackintosh HERE

-Hackintosh Tutorial Database - HERE

-Why Olarila doesn't support TonyMac, Reedit, Little-Translated and others HERE

 

Just Inject these kexts with Bootloader

Bluetooth Bluetooth Intel.zip

Wifi HERE 

 

Add these patches on NVRAM  7C436110-AB2A-4BBB-A880-FE41995C9F82

Quote

  <key>bluetoothExternalDongleFailed</key>
  <data>AA==</data>
  <key>bluetoothInternalControllerInfo</key>
  <data>AAAAAAAAAAAAAAAAAAA=</data>

 

Credits: zxystd on https://github.com/OpenIntelWireless/itlwm

 

We're all here to have fun and learn from each other! That's all Folks!

[jm26200]

Hi Daniel I think I tried everything and your proposal too but impossible. to have the possibility of 
activating the bluetooth my Z590 UD AC config on Ventura everything works but not on Sonoma 
from the beginning need advice maybe. the integrated bluetooth will never be taken into account, 
thank you in advance 
hackintool gives me this

Bluetooth

 

Vendor 0x004C

Devices 0x6000

Vendor Name Apple Device Name BCM_4350C2

 

and informations system

  Contrôleur Bluetooth :

  Adresse : NULL

  État : Désactivé

  Jeu de puces : BCM_4350C2

  Détectable : Désactivé

  Version du programme interne : v0 c0

  Services pris en charge : 0x392039 < HFP AVRCP A2DP HID Braille LEA AACP GATT SerialPort >

  Transport : USB

  ID du fournisseur : 0x004C (Apple)
 

have nice day sir

[MaLd0n]

Im tested these files and just work fine.

[jm26200]

great thanks Daniel for   answer quickly... and  think work but with other CM
have  nice day

Best regards 

[PoceHPoceH]

works perfect thx

Software Versions:

  CoreWLAN: 16.0 (1657)

  CoreWLANKit: 16.0 (1657)

  Menu Extra: 17.0 (1728)

  System Information: 15.0 (1502)

  IO80211 Family: 12.0 (1200.13.0)

  Diagnostics: 11.0 (1163)

  AirPort Utility: 6.3.9 (639.22)

  Interfaces:

en1:

  Card Type: Wi-Fi  (0x8086, 0x50)

  Firmware Version: itlwm: 2.3.0 fw: 36.ca7b901d.0

  MAC Address:

  Locale: FCC

  Country Code: ZZ

  Supported PHY Modes: 802.11 a/b/g/n/ac

  Supported Channels: 1 (2GHz), 2 (2GHz), 3 (2GHz), 4 (2GHz), 5 (2GHz), 6 (2GHz), 7 (2GHz), 8 (2GHz), 9 (2GHz), 10 (2GHz), 11 (2GHz), 12 (2GHz), 13 (2GHz), 36 (5GHz), 40 (5GHz), 44 (5GHz), 48 (5GHz), 52 (5GHz), 56 (5GHz), 60 (5GHz), 64 (5GHz), 68 (5GHz), 72 (5GHz), 76 (5GHz), 80 (5GHz), 84 (5GHz), 88 (5GHz), 92 (5GHz), 96 (5GHz), 100 (5GHz), 104 (5GHz), 108 (5GHz), 112 (5GHz), 116 (5GHz), 120 (5GHz), 124 (5GHz), 128 (5GHz), 132 (5GHz), 136 (5GHz), 140 (5GHz), 144 (5GHz), 149 (5GHz), 153 (5GHz), 157 (5GHz), 161 (5GHz), 165 (5GHz)

  Wake On Wireless: Supported

  Auto Unlock: Supported

  Status: Network Service Inactive

[TheWizzard2203]

I copied all the files from the zip to the kext folder of the OC bootloader (EFI) folder and rebooted. The BT is working again but the WiFi cannot be switched on.

When I copy the ventura version of the airport kext mentioned in the github link, version 2.2.0, it makes an connection attempt during login but then is turned off again. So i almost got it working again. What could be wrong?

In the attached screenshot you can see the kexts that are currently in the kext folder. Maybe some of them need to go? I don't know?

Screenshot 2023-09-28 at 10.23.07.zip

[MaLd0n]

Try with itlwm

https://github.com/OpenIntelWireless/itlwm/releases/download/v2.3.0-alpha/itlwm-v2.3.0-DEBUG-alpha-73b3811.zip

[TheWizzard2203]

Should I just copy that kext into the correct folder and reboot or should i use this file instead of the airport one?

[MaLd0n]

Yes but for this kext u need one app to connect, don't work with Airport

https://github.com/OpenIntelWireless/HeliPort

[TheWizzard2203]

Okay clear. So I deleted the airport kext and placed the kext you recommended into the correct folder and rebooted. Then installed the heliport app but when I run the app it says that itlwm is not running so i must have missed a step i guess?

Edit: I forgot I had to specify the correct kext into the kernel section of the config.plist. I got it working now but now I cannot connect to my work wireless network which has wpa2 enterprise security. Is there a fix for that? It actually cannot connect properly to any network, neither a free one (it doesn't get a proper IP). But switching wireless lan on and off works and in on state it sees networks. it only cannot connect to one.

Edited September 28, 2023 by TheWizzard2203

[MaLd0n]

Secure Boot Model Enable on config.plist misc tab

[TheWizzard2203]

The secureboot model was on 'standard' and I changed it to x86legacy. I got it working now through heliport but now I cannot connect to my work wireless network which has wpa2 enterprise security. Is there a fix for that? It actually cannot connect properly to any network, neither a free one (it doesn't get a proper IP). But switching wireless lan on and off works and in on state it sees networks. it only cannot connect to one.

Edited September 29, 2023 by TheWizzard2203

[Michel Hora]

This solution worked for wifi but bluetooth is not working. there's some fix ?

I can see bluetooth option, I can toggle it but it didn't find any device.

Lenovo S145
Processor: i7-8th (Whiskey Lake Native) Coffee Lake (Hackintosh)
RAM: 20GB
Sonoma


 

Edited October 1, 2023 by Michel Hora

[MaLd0n]

These kexts work fine on my s145 icelake

Try compile kexts under sonoma

[DarkWolf_hun]

Thank you @MaLd0n, working fine ?

[TheWizzard2203]

Hi Dan,

You say we have to inject keys 

<key>bluetoothExternalDongleFailed</key>
  <data>AA==</data>
  <key>bluetoothInternalControllerInfo</key>
  <data>AAAAAAAAAAAAAAAAAAA=</data>

But in the photo the values for these keys are all zeros. Tried both without result (zeros and the values stated) and of course I put the sonoma files in their correct spots.

Do we have to leave the secure boot model on the default default value?

Edited October 16, 2023 by TheWizzard2203

[MaLd0n]

Inject these properties with one txt app like TextMate

[TheWizzard2203]

Can you make a copy and paste of those lines?

[MaLd0n]

config.plist.zip

[TheWizzard2203]

Thanks Dan. I did exactly that. I copied the lines from your config.plist, placed the kexts in the correct places, enabled secure boot model, rebooted but doesn't work on my P1 Gen3. Maybe you can have a look at my config.plist to see if I did something wrong?

config.plist.zip

[HA-OL]

ty for share. It worked flawlessly for me. 

[TheWizzard2203]

Unfortunately not for me. I did everything exactly as described but no sigar.

Edited October 18, 2023 by TheWizzard2203

[TheWizzard2203]

On 10/17/2023 at 9:16 AM, TheWizzard2203 said:

Thanks Dan. I did exactly that. I copied the lines from your config.plist, placed the kexts in the correct places, enabled secure boot model, rebooted but doesn't work on my P1 Gen3. Maybe you can have a look at my config.plist to see if I did something wrong?

config.plist.zip 4.84 kB · 2 downloads

@MaLd0n Could you please have a look at what I possibly did wrong?

[Xanthrax]

On 10/17/2023 at 10:30 PM, HA-OL said:

ty for share. It worked flawlessly for me. 

Can you post your hardware specs? Especially the wi-fi card. Thanks.

[J D]

Is this supposed to get the wifi and bluetooth fully functional? Like for features like handoff and airdrop? I was able to get it to work so I can connect to my bluetooth LE mouse but I wasn't able to use AirDrop. I just recently removed the USB injector and did USBmap with a kext. I'm about to try rebooting and resetting the NVram to see if reinstalling it now that I have the USBmap kext instead of the USBinjectall will fix that. Also curious if there is a fix to the sleep issue. My icelake lenovo laptop seems to continuously crash/restart when it goes into sleep after some time. Everything else appear to work okay though.