OS X Mavericks 10.9.5 bootable USB for Intel

[artur-pt]

hello

try to boot with chameleon

hit 1 to get chameleon screen

is all in guide

and should boot with GE=No

good hack

[z3rito]

I tested with chameleon but the same result. when finished reading the files, restarts, fails to show anything

[artur-pt]

hello

with that info .. only guessing

see ur bios sets

and the smbios u use

https://support.apple.com/en-us/HT201364

good hack

[z3rito]

the bios is fine, I started mac os x 10.6.8 smoothly,

the problem is that after reading the files from usb not charge anything and directly restarts, show no mistake

i tried several options, (-x -f -v GraphicsEnabler=No PCIRootUID=1 npci=0x2000)

I've also tried the usb Yosemite and I happen the same

[pernacabeluda]

Enable NX bit in BIOS setup

http://Olarila.com/forum/viewtopic.php?f=2&t=1804

[z3rito]

i change options in bios at cpu and it its working yeahh, thanks to all

[blazure78]

Hi guys! I got a similar problem too with reaching the installation menu.

As I couldn't boot with Clover (didn't work don't ask me why, it just froze with a non-blinking underscore in the top left conrner, but whatever), I tried with Chameleon and it worked just fine, although i still cannot access the installation GUI and stuff. I'm stuck with a couple of errors such as "DSMOS has arrived" and a couple of other things (see the last 5-10 lines of the screenshot but please don't take in consideration the "unable to enumerate usb device" error-type that was really seldom).

I'm aware it should be somewhat dealing with my GPU but, I have already checked out the manipulations in the first post (stuff like moving .kext into backup folder etc...) but it didn't work. Same thing with flags : i have already tested -v -x GraphicsEnabler=No KernelCache=No but it wasn't really effective huh. My PC is a PACKARD BELL BV IMEDIA J9610 with a PACKARD BELL BV GA-T671MG mobo (I know, that's antiquity stuff), with an Intel Core 2 Duo, and 3GB of RAM, my GPU -if you could ever call it that way- is an AMD ATi MSI Radeon R5450 in PCIExpress (and I had already turned it back to "PCI" in my BIOS).

If someone could help pleaaaase x).

[pernacabeluda]

You should run

mv AMDRadeon* ATI* /kext_backup

Then boot with -f (if using Chameleon).

[blazure78]

Still not working and I don't even have any AMDRadeon or ATI kext file in /S/L/E :\

[pernacabeluda]

Try dart=0

[blazure78]

Not working either, but that was to be expected, my computer doesn't even handle virtualization x) I think it might be something dealing with SMC since it has prompted "ACPI_SMC_PatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out". But I don't get what I'm suppose to do to prevent that :/

[syahradzi]

Guys, i have problem with my installation. i already post my problem http://Olarila.com/forum/viewtopic.php?f=31&t=5788 , can anybody help me? don't intended to spam, but i really hope somebody can help me

[kayoo7]

Im hving problem with the installation

 

14 May 12 11:51:40 localhost OSInstaller[328]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
15 May 12 11:51:53 localhost OSInstaller[328]: PackageKit: ----- Begin Install -----
16 May 12 11:52:34 localhost OSInstaller[328]: PackageKit: Got copier error 5 extracting to path /./system/Library/Framewroks/AppKit.framework/Versions/c/Resources/cs.lrpoj: Input/output error
17 May 12 11:54:18 localhost OSInstaller[328]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package "Essentials.pkg"." UserInfo=0x7f8f65a850b0 {NSLocalizedDescription=An Error occurred while extracting files from the package "Essentials.pkg"., NSFilesPath=/Volumes/Untitled 1/.OSInstallSandbox-tmp/Root, NSURL=Essentials.pkg -- files:// localhost/System/Installation/Packages/OSInstall.mpkg, PKInstallPackageIdentifier=com.apple.pkg.Essentials, NSUnderlyingError=0x7f8f6759f520 "The file couldn't be opened because it isn't in the correct format."} {
18 May 12 11:54:19 localhost OSInstaller[328] Install failed: The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
19 May 12 11:54:20 localhost OSInstaller[328]: No system on disk Untitled 1 to revert bless
20 May 12 11:54:20 localhost OSInstaller[328]: Unable to revert bless to target or imgsrc.

 

It says like this and asks for restart i tried different HDD formatted to mac hfs+

but still no sucess

Mobo: ASUS PQ5PL-AM

Processor- Intel dual core

Ram - 3 GB

HDD- First Hitachi 320 GB

Second - Seagate 120 GB

[jh2017]

Hi all. I'm on the verge of giving up when it comes to installing Mavericks on my main desktop (Inspiron 660 with a core i5 3340 and either a 750 Ti or an 8400 GS 1 GB or a GT 730 4 GB. None of the GPU's work with Mavericks aside from the 8400 since I had used the bootflags "-v dart=0 GraphicsEnabler=Yes nvda_drv=1" and that gave me full resolution at the installer and I installed and rebooted, only to be greeted with the error "IOBluetoothHCIController -- Missing Bluetooth Controller Transport!". I have tried countless boot flag combinations to try and fix this, yet it consistently is giving me this error. The reason I want to use Mavericks is I love the interface it has compared to the flat iOS design which the others after it have. If anyone could give me any pointers, I'd be grateful.. Oh, and if it helps: booting into safe mode doesn't work either. It simply reboots after getting past the IOBluetooth error.

[ilbars13]

Thnks

[jamebon000]

yes link test

[MaLd0n]

https://Olarila.com/forum/viewforum.php?f=51

[vuarong6090]

Good

[MaLd0n]

[ref]vuarong6090[/ref],

[agir]

ok

[hostcema]

thank you

[hostcema]

thank you

[offline71]

Hi,I have GA H61 DS2 rev 2.0,Pentium 870 and 4gb ddr3 ram.It is posible to install 10.9.5 on it?I successffuly installed system on hard disk,but unable to book from hard.Different.errors are constantly occurring,so my question is it is possible?Thanks in advance.

[MaLd0n]

[ref]offline71[/ref], yes, work good

[offline71]

MaLd0n thanks for answer.I read post install intructions but they don't helped me.I tried

1. settings:default

error:bluetooth HCIH controler start-copleted=system hangs

2.settings:clover without cashes

error:bluetooth HCIH controler start-copleted=system hangs

3.settings:clover without injected kexts

error:missing bluetooth controler transport=system hangs

I read that the error is related to the graphic,but don't found solution.

Then I tried

4.settings:boot args:-v GraphicsEnabler=No ncpi=0x2000

error:AGPM controller unknown platform=system hangs

5.settings:settings:boot args:-v GraphicsEnabler=Yes ncpi=0x2000

error:AGPM controller unknown platform=system hangs

6.settings:boot args:-v -x ncpi=0x2000

error:bluetooth HCIH controler start-copleted=system hangs

7.settings:clover options-graphics injector meny-inject edid-enable

error:pass bluetooth HCIH controler start-copleted and hangs on white screen

just before desktop.

is there anything else i could try to boot on to desktop?

Bios settings:

Sata mode= AHCI

UEFI boot=disable

Boot=other OS

don't have VTD in bios

Thanks in advance