OS X Mavericks 10.9.5 bootable USB for Intel

[iHackintosh_PT]

--Download

Updated Images

 

--Unzip and Burn

 

-Windows

 

https://sourceforge.net/projects/win32diskimager/

 

-OS X

 

diskutil list

diskutil unmountDisk /dev/diskX

sudo dd if=[arraste a imagem para o terminal] of=/dev/rdiskX bs=1m

 

--Install Problems?

 

You can press O or BarSpace key in Clover boot screen and change some configs for your hardware.

 

-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!

 

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, MaLd0n, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Badruzeus, JennyDavid, Sampath Kumar and many many others!

 

We're all here to have fun and learn from each other!

[PimentelX86]

Hello.

Great Job. Only donwload and use.

[anhminhvip]

working full

greats

[seizmos]

First, greetings to all.

All work fine on this release, thanks for share Olarila.

Only lan RT8111 driver needed, everything else work ootb

My setup is based on

cpu 4670

mbd gigabyte H87M-D3H

Asus GTX760 DC OC2 2GD5

Kingston 8GB ram

Intel 120GB SSD

500GB HDD

[artur-pt]

hello

have u try this kext

http://lnx2mac.blogspot.pt/p/realtekrtl81xx-osx-driver.html

good hack

[seizmos]

Yes, i installed only driver for rtl8111, chameleon for boot, smbios and ssdt, all work fine.

[Daavyy]

help me please. It stuck at loading drivers with 6 lines dot then reboot itself and boot to windows 8.1. how can I do for that.

http://image.ohozaa.com/view2/x8vAFRbq4oAPnlcq

[pernacabeluda]

Try boot legacy instead of UEFI (UEFI boot is for Aptio BIOS only).

Post your hardware specs.

[Daavyy]

Try boot legacy instead of UEFI (UEFI boot is for Aptio BIOS only).

Post your hardware specs.

 

Asrock H87 Pro4

intel i7 4770k

Gigabyte GTX 770 OC

[Daavyy]

i always boot in legacy mode. I can not boot in UEFI mode. what should i do

[pernacabeluda]

I have no experience with Haswell.

[linarense]

Could you share the MD5 of "OS X 10.9 Install USB.raw" to check the download?? thanks!!

[pernacabeluda]

MD5 (OS X 10.9 Install USB.raw) = 6179a219e1bf7634fb321fabb8d3288d

Edited November 18, 2013 by Guest

[linarense]

Thanks, i have Mavericks running in my laptop

[tahyarg]

hi, thanks for a great release.

i installed from UEFI usb very smoothly with no problems.

but when i try to install clover (from http://sourceforge.net/projects/cloverefiboot/) using package installer, and reboot my pc i get error "Unable to find driver for this platform: \"ACPI\"...."

i chose the "install for UEFI motherboards" option in the clover installer.

on the other hand, if i boot from Olarila's usb and select my mac installation, it boots perfectly.

is there a way to install Olarila's version of clover that is packaged in the usb release? or what is Olarila's settings for clover that is included in the usb?

thank you.

my specs:

core i5 4760

gigabyte GA-H87M-D3H

nvidia gtx760

8gb ram

[pernacabeluda]

Mount the EFI partition of the installer and you will see. You can even copy the same version of Clover with config and kexts, but I suggest you read the Clover wiki and configure it properly. The installer config is very "generic".

http://Olarila.com/forum/viewtopic.php?f=27&t=3101&start=490#p32417

[Marchief]

Hi Guys, apologies in advance - I am a noob to the Mac osx on a PC thing and I am clearly doing something wrong, have hunted in the forum and can't see anything similar.

Got the image working and booting off the USB but when I get to the install stage it doesn't show any of my hard drives, only the USB stick. They don't show up in the disk utility either.

I have a solid state Sata 3 120GB C:/ drive for windows and sata 3 1TB drive partitioned with a drive for the mac install.

I also tried formatting the spare partition as a mac partition using GPARTED but it still didn't pick it up (now windows doesn't see my second drive so am about to use GPARTED again to format it back to NTFS.

CPU: Core i7 960 3.2ghz

Mem: 8GB

Mb: Rampage Gene III

Main OS: Windows 8

Graphics : Radeon HD 6900

Have I gone wrong somewhere or am I missing a step?

I have also tried booting the USB in Virtual Boot (using the live CD trick ) on a mac system and a windows system but it just hangs after booting form the USB.

Any suggestions / help on getting either solution working is appreciated.

Thanks

[artur-pt]

hello

use only 1 hd for the installation

set AHCI in bios

good hack

[tahyarg]

thanks to pernacabeluda i was able to copy the usb installer's clover to my hdd.

Mount the EFI partition of the installer and you will see. You can even copy the same version of Clover with config and kexts, but I suggest you read the Clover wiki and configure it properly. The installer config is very "generic".

http://Olarila.com/forum/viewtopic.php?f=27&t=3101&start=490#p32417

before this i had tried installing the official clover and configuring my own plist, but i could not get it to work after many tries- too advanced for a noob.

now with the usb installer's clover generic config my hackintosh can boot fine and seems to work without problems... which is better than nothing i guess

[Marchief]

hello

use only 1 hd for the installation

set AHCI in bios

good hack

 

Enabled ahci storage mode in bios and formatted a partition as hfs + with gparted and it still doesn't see my hdd only the CDROM drive and the USB drive. Do I need to set an extra option from the initial menu or is my rig just not compatible?

Thanks