Intel HD Graphics 630 5MB VRAM macOS 12.1

[Springblade]

Hello there, I've installed macOS 12.1 (21C52) via OpenCore Kaby Lake EFI from Olarila and I don't know how to proceed on freeing more VRAM to get full graphics acceleration, here's my specs:

Motherboard: Gigabyte GA-H110M-S2V
CPU: 3.5 GHz Quad-Core Intel Core i5 (Kaby Lake)
iGPU: Intel HD Graphics 630
RAM: 8 GB 2400 MHz DDR4

Can anybody please help me out?

[MaLd0n]

<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
            <dict>
                <key>#framebuffer-patch-enable</key>
                <data>AQAAAA==</data>
                <key>AAPL,ig-platform-id</key>
                <data>AAASWQ==</data>
                <key>device-id</key>
                <data>ElkAAA==</data>
                <key>framebuffer-unifiedmem</key>
                <data>AADw/w==</data>
            </dict>    

[Springblade]

8 hours ago, MaLd0n said:

<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
            <dict>
                <key>#framebuffer-patch-enable</key>
                <data>AQAAAA==</data>
                <key>AAPL,ig-platform-id</key>
                <data>AAASWQ==</data>
                <key>device-id</key>
                <data>ElkAAA==</data>
                <key>framebuffer-unifiedmem</key>
                <data>AADw/w==</data>
            </dict>    

I'm sorry but I can't read that... It ended up that I've made something simmilar on OpenCore Post-Install guide but the last key "framebuffer-unifiedmem" I can't seem to "translate" to what I can actually read, which is what I've done here: imgur.com/a/abpucBI (Couldn't upload the screenshot anyhow) Also, could you please tell me how I can use it? I know only how to do changes on config.plist on ProprerTree. 

Edited January 26, 2022 by Springblade
hyperlink

[MaLd0n]

just add it in device properties with one txt app like TextMate

[Springblade]

@MaLd0n I'm sorry and I'm also worried that you'll get mad at me but to be honest even after looking for guides or tutorials of how to read things in TextMate and after lots of tries I ended up with a message before booting up the os HD which says: "OCS: No schema for PciRoot(0x0)/Pci(0x2,0x0) at 0 index, content <DeviceProprieties>!"
Please, help me out!

Edited January 27, 2022 by Springblade
Found an error

[namtt1129]

Hi MaLd0n,

I’ve tried following olarila’s guide and I installed Ventura on my PC (all in one PC).

But my monitor resoluation only is 1280x1024 and my igpu only receive 5mb (intel hd 630)

I had tried patch igpu but can't fix this error

1. my EFI : https://drive.google.com/.../15SwnTcrcvKw1QDLYGjR.../view...

2. My all in one pc spec:

Mainboard: JW H110i (Intel H110 kaby lake)

CPU: i3-7100

RAM: 8GB DDR4

GPU: Intel HD 630 2GB

Ethernet: Realtek RTL8168/8111

WiFi: Intel centrino N 6200

Audio: Realtek ALC662

 

i am using bootarg =igfxvesa now.

if i remove it, my pc boot into blackscreen before apple logo
please help, thank you very much

 

Bios/UEFI Configuration

-Sata = AHCI mode

-Secure Boot = Disable if need

-CSM = Disable with AMD cards

-If you have only IGPU use -igfxvesa bootarg for easy installation

[MaLd0n]

Check here

https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.IntelHD.en.md#intel-uhd-graphics-610-650-kaby-lake-and-amber-lake-y-processors

[namtt1129]

i had patched by guide but not success,

i find more and known my monitor connect with mainboard by LVDS port,

can you help me patch this igpu,

 

file attach is my config, ioreg list

file1.zip