Mac OS X 10.8.5 Mountain Lion bootable USB for Intel PCs

[jjk2014]

I've tried chamelion as you told. But its getting stuck at "Missing bluetooth..". Also I'm able to boot well using default installer clover.

PS: I installed using clover. I can't install with chamelion coz it gets stuck like above.

I don't know what's in Clover which makes it possible to boot/install well on my system. Sorry to ask you again; is there any way I can install the exact bootloader from usb to hdd.

thank you

[PimentelX86]

Hello

You can use Chameleon, did you create these files?

*org.chameleon...

*SMbios

 

And installed these kexts?

Also you need install FakeSMC and NullCPUPM(generic power management)...

 

post your or.chameloen and SMbios files... i'll check it

[greko2009]

Hello,

I installed OS X, Clover bootloader and Realtek Network drivers.

When booting from USB everything works fine, I also have 2 monitors and they both work perfectly and desktop is extended.

When I try to boot from hard disk then boot gets stuck at :

 

missing bluetooth controller transport

 

Also, what should I do to enable sound?

My config is:

Gigabyte EP45-DQ6

Nvidia Geforce 9500 GT 1GB

8GB RAM

Thank you

[artur-pt]

hello

u should read this

http://Olarila.com/forum/viewtopic.php?f=28&t=1716

http://Olarila.com/forum/viewtopic.php?f=28&t=3901

good hack

[greko2009]

hello

u should read this

http://Olarila.com/forum/viewtopic.php?f=28&t=1716

http://Olarila.com/forum/viewtopic.php?f=28&t=3901

good hack

 

Thanks a lot but since it was working perfectly when booting from USB I checked the bootloader differences and noticed that USB bootloader "injects" NVidia. So, I changed my clover options to "inject NVidia" , copied NV* kexts from USB and it works perfectly (tested with a steam game too to make sure 3D acceleration works). Also installed ALC889A kexts and sound works fine too.

Thank you for your help

[jjk2014]

Let me explain my progress..

I started fresh install by partition hdd into two(250GB each) as GUID. I booted ML install usb using clover installed ML on the first partition. Following this guide http://Olarila.com/forum/viewtopic.php?f=27&t=3101&start=490. I managed to boot from hdd without using usb. After this success, I went on to install windows vista. Again I started over by partition hdd using ML usb disk utility restarted and installed vista on the second partition. I could boot vista from hdd. Then again I installed ML to the first partition followed guide above but after restart still vista is loading.

So now I need help dual booting vista.

[artur-pt]

hello

u need to install the boot loader in first partition

use boot0hfs for chameleon

use boo0ss for clover

good hack

[jjk2014]

I made 2 guid partitions using ml usb installer(one for OSX and 2nd msdos)restarted. First installed Vista.(in vista setup custom,I saw about 4 partitions I selected the msdos partition). Vista booted normally from hdd). Then I installed ML on OSX partition installed clover bootloader as imentioned above. Still only vista loads..

[artur-pt]

hello

u do something wrong..

is so easy

guid

2 3 partitions

first mac os x .. hfs+

second to windows (fat should be only formated in windows install ntfs)

install the 2 system

install the boot loader in first.. boot0hfs or boot0ss

and there u go

if not work no ideias ( it works for anybody using legacy boot )

good hack

[jjk2014]

Thank you artur... I forgot to add boot0ss while installing clover.

So basically this is what I've done correct me if I'm wrong:

Partitioned HDD installed windows on second partition. Then installed OSX on first partition.

Booted using USB to OSX then I installed clover package(rev 2061 same with usb i guess). Immediately after installing

clover I followed pernacabeluda's instructions http://Olarila.com/forum/viewtopic.php?f=27&t=3101&start=490 and booted into

HDD. Am I correct upto this level?

[jjk2014]

So now I can boot both OSX and windows successfully.

I managed to install graphics, sound, network etc. and use my system without any major problem. Only System standby don't work.

So Now I have these questions.

Should I install any other kexts to safely use my system.( From what I know the ML EFI already contains all the necessary kexts)

I don't mind standby etc. I just want to use softwares like CAD etc.

So shall I continue using system or anything important to check???

[artur-pt]

hello

only need to install third party kext if need it..

read carefully post intall guide.. is all there

http://Olarila.com/forum/viewtopic.php?f=28&t=1716

good hack

[jjk2014]

thanks artur,

So are you saying that I can use my system without damaging it?

Please note that I have not added ant dsdt/Power management etc. Only the EFI folder copied from USB Installer to HDD.

[artur-pt]

hello

u don't have native power management.. because u use nullcpupowermanagement.. like the name say .. it null appleintelcpupowermanagement

and protect u cpu overeating

but u can work that way.. like so many others users..

only have minimum state and maximum..

about that u must read..

good hack

[jjk2014]

will it overheat my CPU and thus damage motherboard. I will be using some photoshop like softwares on my hack.

One more thing can I update everything from Appstore Update section? If I update using Appstore I should immediately do it afterML install? OR after setting bootloader kexts etc?

which way you prefer?

[artur-pt]

hello

what u gonna update ?

if the system is not working well ?

first u set the system.. when is stable.. and u know what u do to make that.. then update

good hack

[jjk2014]

Thanks for your advice and keeping my spirit up...

Now I fell into another trouble..

This time I partitioned my hdd into 3. first osx, then rest two msdos ( because I needed a partition for exchange data between OSes.)

As usual I first installed Windows vista on 2nd partition msdos. It was booting fine. After finishing vista setup, I installed ML via USB into the OSX partition. I installed clover using boot0ss Now I can boot ML fine but not to vista.

Clover is showing the two os in menu ML and Boot windows from Legacy 3. If I select Vista I see a cube-like icon for sometime then blank screen.

Can u tell where I went wrong?

[artur-pt]

hello

no idea.. if it work once.. u must do something wrong..

revise u procedure..

good hack

[duey101]

Hi, I've been working on this for a while now (3 days) and I can get it to install but when I try to run it I get this screen...

I can boot up to the USB after install and go to the option to boot from the HDD I installed on (primary, active) but when I click on that option the cursor blinks once and then freezes on a plain screen, nothing happens. If I boot using Chameleon I get the similar options from the Chameleon menu and I click boot from HDD, get the above progress and then it stops. I have no clue how to fix it. Any ideas what is wrong?

This is the USB RAW install from this link...

http://bayproxy.me/torrent/8915051/

[artur-pt]

hello

read the install guide ...

have u moved ur video kext ?

the nvidia don't work.. only hd 3000

is all in install guide

http://Olarila.com/forum/viewtopic.php?f=28&t=2193

good hack

[ericsia]

Trying to install this version over HP DV6 1390 but getting this before starting installation:

this version of Mac OS x is not supported on this platform reason: Mac-F22788A9

any idea?

are you booting from USB? Clover or Chameleon?

Try forcing another SMBIOS, a more recent model which is supported by Mountain Lion.

I can't find the folder where you install clover, can you tell me where is it?

[henrietta1234]

hello. what does that mean :

 

"Access chat to get download link (channel topic)."

 

if i click on the chat im in some chat group where nobodys answering and i dont get a download link? 

thanks in regard

[MaLd0n]

On 12/28/2020 at 8:05 PM, henrietta1234 said:

hello. what does that mean

https://www.olarila.com/forum/83-olarila-pre-made-iso-recommended/

[Oğuz Bayar]

thaks for all dude