Mac OS X 10.8.5 Mountain Lion bootable USB for Intel PCs

[jeet92]

After I select to boot OS X from Clover, it then runs some codes and then just turns off my screen, my computer is still running. Running an i5 with intergrated HD4000. Tried deleting all non Intel graphics kexts, but no avail. any help?

[pernacabeluda]

Delete Intel video kexts

AppleIntelHD* AppleIntelFramebuffer*

[jeet92]

Thanks! I was able to boot from USB and install but now when booting from installation I get:

NTFS -fs warning (device /dev/disk0s3, pid 112): ntfs_system_inodes_get():Windows is hibernated. Will not be able to remount read-write. Run chkdsk.

Any ideas?

[pernacabeluda]

Probably the same issue, boot in single user (press space bar if using Clover) and move video kexts

http://Olarila.com/forum/viewtopic.php?f=27&t=1677

[veneisse]

my tplink adapter isnt working with mac at all so as my backup i have sagem xg762n but i cant find drivers for 10.8 (only .3 and .4) can any1 help me ?

[zsolt.molnarrr]

Hello there!

My setup is: Acer 7750G, Intel Core i7(2Ghz), 4Gb DDR3 ram, Intel HD3000 + AMD Radeon HD 6650M(2Gb), Athereos WLan+Lan, Realtek Sound etc...

I'm using Clover(v2.09) and I get panic every time before I reach the installer.

I've only deleted Nvidia and Intel graphic kexts, (but the system behaved totally the same when Kernelcache and ALL graphics kexts were removed).

When I use the default bootflags of Clover with only -f (instead of -v) bootflag I can see instantly the apple logo but it crashes a few moments later, otherwise I see the black background loading of the drivers and panic.

Please help me I'm new to this as you can see and I've been for 3 days now:(

Regard,

Zsolt

[artur-pt]

hello

clover flags not the same as chameleon

if u hit 1 when u boot u go to chameleon

in clover gui

options (o)

boot withoutcaches

good hack

[zsolt.molnarrr]

Changing to Chameleon bootloader and booting with "-f GrapicsEnabler=No" worked for me and I succesfully managed to complete the installation. Thank you for the help!

(Edit: All graphics kexts and kernelcache were removed with TransMac.)

[idoliki]

Okay, I solved the crackling issue.. After all tries, the problem was the bootloader.. I used Chimera, Chameleon, Clover.. I installed all kinds of bootloaders and then I tried to boot from the USB's bootloader (Clover, version older i think) and the audio was crackling just a bit.. I enabled SSE2 and now it's perfect. I moved the USB's Clover to EFI of my main volume and now it's all good with sound..

Just a silly question.. Everytime I restart my computer I have to enable SSE2 and to put 48000 Hz in Audio Midi Setup. Is there a way to make that change forever? Because it's a bit boring to always check that every time I restart my pc? Other than that, it's great!

Thanks pernacabeluda for everything!

[jeet92]

NTFS -fs warning (device /dev/disk0s3, pid 112): ntfs_system_inodes_get():Windows is hibernated. Will not be able to remount read-write. Run chkdsk.

Was my old error. after moving the kexts I now have:

NTFS -fs warning (device /dev/disk0s3, pid 76): ntfs_system_inodes_get():Windows is hibernated. Will not be able to remount read-write. Run chkdsk.

[artur-pt]

hello

what kext have u removed ?

u remove the *capri.* ?

good hack

[praetorius]

If you want to use Chameleon press 1 at boot

 

at which point do I press "1"? on boot-up, I press F8 on Asus board to select boot device

1. do I highlight the USB installer, press 1 then press enter?

2. do I highlight the USB installer, press enter then 1? (if i don't press 1 here, i am presented with the Clover bootloader)

Since I tried option #2 yesterday, it booted in Verbose mode, then came back out to the Apple Screen with the rotating wheel and did not progress further. Do I delete the Intel or whatever kexts using transmac?

[CosmoHack]

Hello!

This is my first Hackintosh install and honestly, I need some help since I have been trying to install this for 3 days but I am having some problems that aren't allowing me to do it right.

First of all, my computer:

Intel i7 2600K

Gigabyte GA-Z68P-DS3 Rev 1.0 BIOS F4

2 x G Skill F3-12800CL9-4GBXL

MSI GeForce GT520

Essentially, the problem I am facing is the message "System uptime in nanoseconds: xxxxxxxxx". This happens while booting, before the installation starts.

I have tried:

- Adding the DSDT.aml of my motherboard to the extra folder. No success.

- Deleting the graphic video kexts. This leads to a message that says "PCI Configuration Begin".

- Adding some arguments (I don't remember each of them, they were several) like:

-v -x PCIRootUID=0 npci=0x2000 GraphicsEnabler=No

I have been reading a lot but I have no idea of what to do.

Which way should I go?

Thank you.

[artur-pt]

hello

what are u using for the install ?

check u bios configs

ACPI 2.0 support

ACPI APIC support

Execute Disable Bit (NX bit)

HPET support (High Precision Event Timer)

Enhanced Intel SpeedStep

Enhanced Halt State (C1E)

all enabled

HPET mode: 64-bit

SATA mode: AHCI

Limit maximum CPUID: Disabled

good hack

[CosmoHack]

hello

what are u using for the install ?

check u bios configs

ACPI 2.0 support

ACPI APIC support

Execute Disable Bit (NX bit)

HPET support (High Precision Event Timer)

Enhanced Intel SpeedStep

Enhanced Halt State (C1E)

all enabled

HPET mode: 64-bit

SATA mode: AHCI

Limit maximum CPUID: Disabled

good hack

Hello Artur, thanks for answering.

Here is my config:

ACPI 2.0 support - Does not appear in my BIOS.

ACPI APIC support - Does not appear in my BIOS.

Execute Disable Bit (NX bit) - If it is the same as "No-Execute memory protect", then it is Enabled.

HPET support (High Precision Event Timer) - Enabled.

Enhanced Intel SpeedStep - Does not appear in my BIOS.

Enhanced Halt State (C1E) - Does not appear in my BIOS.

HPET mode: 64-bit - OK

SATA mode: AHCI - OK

Limit maximum CPUID: Disabled - OK

I didn't change anything, that was also the config I was using to boot to the installation.

[artur-pt]

hello

are u using nullcpupowermanagement.kext ?

must use it.. to avoid cpu KP

have u disable onboard graphics ?

good hack

[CosmoHack]

hello

are u using nullcpupowermanagement.kext ?

must use it.. to avoid cpu KP

have u disable onboard graphics ?

good hack

Hello

At the moment, I am using the default USB image so, if nullcpupowermanagement.kext is inside by default, yes I am using it.

The integrated gpu is disabled.

Also, now I am getting PCI Configuration Begin everytime I try. Now the nanoseconds message doesnt appear. I didnt change anything!

Thanks

[artur-pt]

hello

try to insert in boot

npci=0x2000

good hack

[CosmoHack]

Tried it, also npci=0x3000.

Now I get "system uptime in nanoseconds".

Thanks

[artur-pt]

hello

-x GraphicsEnabler=No npci=0x2000

try it

good hack