Mac OS X 10.8.5 Mountain Lion bootable USB for Intel PCs

[appleliciouzs]

Greetings! I am new in installing Mac OS X. Actually, I downloaded already the OS itself but I'm having kernel panic and it says that cannon load UEFI settings??.. I really want to install this. Please help me, I am really new installing this since I never owned a Mac products.

Btw, this my system:

Asrock H61m-u3s3

Intel Core i5 2320

8GB RAM

Power Color 7770 ( AMD Radeon 7770) Since i found that my gpu are supported in this version of ML(10.8.3)

Please help me. TIA.

[Xelerater]

When ever i try to boot from Hard disk through chameleon boot loader i get this kernel panic (attached image) please help.. if I set the system definition to iMac 12.2 then still i get the same error how to fix??

I need to know if i need to flash the bios of my motherboard (i mean is it necessary)??

Please guide, Thank you

 

[pernacabeluda]

You need to patch AICPM and use SSDT for your CPU.

Read

http://Olarila.com/forum/viewtopic.php?f=28&t=1703

[Xelerater]

Thanks alot for helping, i have managed to fix that Kernel Panic above, but unfortunately now i'm getting these two kernel panics randomly (see attached pictures).

I'm using system definition MacPro 4,1 to Fix the 560 ti values (as mentioned in below link).. is there any way to attempt 560 ti fix, if I use system definition iMac 12,1 or iMac 12,2.

http://dbm.devbin.org/gtx560ti/

Thanks alot guyz for all the support, i must appreciate your efforts

 

 

[Xelerater]

Thanks alot for helping, i have managed to fix that Kernel Panic above, but unfortunately now i'm getting these two kernel panics randomly (see attached pictures).

I'm using system definition MacPro 4,1 to Fix the 560 ti values (as mentioned in below link).. is there any way to attempt 560 ti fix, if I use system definition iMac 12,1 or iMac 12,2.

http://dbm.devbin.org/gtx560ti/

Thanks alot guyz for all the support, i must appreciate your efforts

 

Thanks alot guyz i have managed to fix it, i selected iMac 12,1 as mentioned in this forum, all is fine now.

I want to build another Hackintosh and i want to know that if this PC is OK for Mountain Lion, or should I install Lion or Snow Leopard.

System Specs:

Intel Dual Core E6500 (2.93Ghz)

Asus P5QPL-AM (Intel G41 Chipset) (LGA775), Video Chipset: Intel GMA 4500(M)(HD)

Audio: Realtek ALC887

Network Card: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (NDIS6.20)

1 gb DDR2 Ram (Bus Speed 667 Mhz)

Let me if there is some DSDT available for this Motherboard.

If I need to upgrade RAM then let me know (DDR2 2gb 800 Bus would be fine?). I need to know about SMBIOS shall i select iMac 9,1 it will be fine? or shall i use Mac Pro 3,1?

[bravo503]

Hello, new to the forum and hackintosh looking for some guidance

I have managed to boot the flash drive and install osx onto my hard drive. when I boot it up after installing it I select the hard drive it flashes some text on the screen very quickly and then reboots.

I have tried using verbose mode -v, safe mode -x, -f, and -F. What can it be if it will boot from the usb but not from the hard drive.

additional info:

for some reason it always boots straight to chameleon i have never seen clover.

I am using a 128gb kingston ssd

motherboard: asrock Z77 extreme 4

cpu: corei7 3770k

thanks in advance

[artur-pt]

hello

take a good read here... what is u graphics ?

http://Olarila.com/forum/viewforum.php?f=28

good hack

[bravo503]

my graphics is intel hd 4000

I checked the link you posted and I found this link http://Olarila.com/forum/viewtopic.php?f=28&t=3111. I couldn't even begin to understand what those instructions were explaining but I noticed that the files gave the vid card 32mb of ram. I set my bios to give only 32mb to video and it booted up!

I'm sure there's a long road ahead because nothing works currently, but at least I have something to work with!

[artur-pt]

hello

i see but u must read...

is all here in forum to do a hack... but must read about it

mac os x is developed for mac .. hack mac os x is 99% of reading, googling, persistency and 1 % of luck u hardware be compatible

good hack

[kendovietnam]

I installed with -v -x -f GraphicsEnabler=NO. Everything was fine until this morning, i could not boot to MAC OS. Does anyone can help me please? I used Dell Inspiron 5250 with Intel i7 3612QM. Mac OS did not recognize any graphic cards, ATI 7670 or even HD 4000 with full kexts installation.

[artur-pt]

hello

amd card don't work

give a good read in Guides and Tutorials here in forum and u see how to install intel hd 4000.

http://Olarila.com/forum/viewforum.php?f=28

good hack

[wallenfx]

Guys I have problem when trying to install OS X 10.8.3 I get White screen with spinning gear/wheel(cursor) i tryd GraphicsEnabler=No -f , PCIRootUID=1,0,1-x and no luck still stuck with white screen and spinning wheel. Please HELP ! I'm using USB BOOT

AMD RADEON 6670

Intel core i5 3550 3.3 GHz

Gigabyte GA-H77-DS3H

[pernacabeluda]

Did you try both Clover and Chameleon?

Try moving video kexts, see instructions on first post.

[wallenfx]

I did try both and i get same problem I'll try moving video right now.

[wallenfx]

Moved kext but still same problem...

[wallenfx]

with GraphicsEnabler=No thats where it stops

[mendietinha]

you have to move the proper kexts and boot with GE=No and -f. or -x too.

[wallenfx]

I Used GraphicsEnabler=No -x and got to instalation and instaling right now ! Lets see how it will go And thank you very much!

[wallenfx]

Hey me again I instaled OS X 10.8.3 with CLOVER and when when I want to Boot the USB drive, then choose to boot the HD you just installed OS X (not the installer USB again) I'm stuck at this screen

BUT IF I USE -X AND GRAPHICSENABLER=No I GET TO SAFE MODE... WHAT SHOULD I DO ?

[pernacabeluda]

You have to configure graphics injection and maybe patch kexts

http://Olarila.com/forum/viewtopic.php?f=28&t=736

[wallenfx]

i fixed everything but now i get boot0 error and i used Clover to install OS X 10.8.3 how to fix it help

[pernacabeluda]

Like this, but get boot1h from /usr/standalone/i386

http://Olarila.com/forum/viewtopic.php?f=28&t=1676

[wallenfx]

I'm geting dd: boot1h: no such file or directory

[pernacabeluda]

You have to copy it from /usr/standalone/i386 to the root of the installer USB

 

cp /usr/standalone/i386/boot1h /Volumes/OS\ X\ Install\ USB

[wallenfx]

But there is no boot1h file on USB WITH MAC OS X 10.8.3...

There is only boot.efi