Mac OS X 10.8.5 Mountain Lion bootable USB for Intel PCs

[pernacabeluda]

Hi,

try using Chameleon, press 1 at boot0:test screen.

[sparky2k]

Hi,

Thanks that worked, quickly held down key "1" after selecting my USB boot device and in the Chameleon bootloader. Think I'll stay with Chameleon then, always used it fine before on my older hackintosh/Windows system on Snow Leopard.

Installer loaded fine too, only have snow problem over DVI via KVM switch, think had it before, does OS X enabled HDCP that my KVM may not support? It works fine normally if I connect to my monitor's HDMI port instead.

[newbforlifes]

Hi guys, I just got an Asus S400 and I've managed to install using safe boot but when booting

I run into this error NTFS-fs warning(device /dev/disk1s4, pid139): ntfs_system_inodes_get(): Windows is hibernated. Will not be able to remount read-write. Run chkdsk.

Any ideas? Thanks in advance

[artur-pt]

hello

if u have only that, no problem , the issue u report is related with windows 8

maybe u have windows 8 in the same hd ?

good hack

[newbforlifes]

Yes, I have windows 8 on the same HD

What do you suggest I do? Wipe the drive and start again?

I have some information on it so I would be happier if I could skip that

[mitchellpeixer]

(sei que o dono do topico é brasileiro entao vou falar em pt-br)

consigo bootar tudo certo, sem erros, porem quado vai comecar a aparecer o inicio da instalacao, a tela fica branca, aparece o mouse (consigo ate mexer ele) mas nada acontece, fica parado e nao aparece mais nada.

ja tentei com chameleon apertando 1, da a mesma coisa

como eu faço para "digitar" "-v" (por exemplo) no chameleon, tem que aperta alguma tecla pra aparecer um console?

google translate:

(I know the owner of the topic is Brazilian then I will speak pt-br)

I can boot just fine without errors, however priate will begin to appear the beginning of installation, the screen goes blank, the mouse appears (I can even move it) but nothing happens, sits still and does not appear any more.

already tried with chameleon pressing 1, the same thing

how do I "type" "-v" (for example) the chameleon, who has pressed a key to pop up a console?

[artur-pt]

hello

-v is a flag for the boot loader..u must read about mac os x, and about what is use to do a hackintosh

so in chameleon screen

write that

-v

u can read all about here in this forum

good hack

[garegin]

i can't get the installer to start when using clover. my board is p8z77-v lk. any ideas? i already deleted the intel video texts.

my cpu is 3770 i7, gpu is hd4000.

[marceldarvas]

I created a bootable USB multiple times, but when I try booting it with my ASUS P5Q Pro Turbo Motherboard it doesn't recognize it. Can someone help me?

[pernacabeluda]

i can't get the installer to start when using clover. my board is p8z77-v lk. any ideas? i already deleted the intel video texts.

my cpu is 3770 i7, gpu is hd4000.

Did you delete kernelcache?

 

I created a bootable USB multiple times, but when I try booting it with my ASUS P5Q Pro Turbo Motherboard it doesn't recognize it. Can someone help me?

Try using some partition manager to mark the partition as active

http://Olarila.com/forum/viewtopic.php?f=18&t=2238

[marceldarvas]

Try using some partition manager to mark the partition as active

http://Olarila.com/forum/viewtopic.php?f=18&t=2238

 

I tried doing both: marking the partition as active and using the .bat file. None of them work. Could the problem be that I want to install Mac OS on my SSD that still has Windows on it? (Once I get installer running fill format drive)

[pernacabeluda]

You should be able to boot the installer, no matter if there's already an OS installed in the target drive.

Did you configure the BIOS properly to boot from USB?

[marceldarvas]

Edit #3: Installed Mac OS X and it was working OK (apart from Sound, LAN), then I installed a DSDT for my motherboard. Restarted and now I am getting a kernel panic. How can I remove that DSDT. I am trying to boot in with both USB and SSD but none work. Should a do a fresh install?

Thanks!

[pernacabeluda]

I don't get it, how did you manage to boot the installer?

Booting from USB should ignore DSDT.aml in SSD. You can also boot from SSD typing DSDT=no.

Never use DSDT from someone else, patch your original one instead.

[marceldarvas]

That's the first time I hear this. How can I patch a DSDT myself?

[pernacabeluda]

There are plenty of topics about it in the DSDT forum

http://Olarila.com/forum/viewforum.php?f=19

[marceldarvas]

Thanks!

Is there a way of recovering from a Kernel Panic?

[pernacabeluda]

It depends on the cause of the KP. You can boot the installer and use the terminal (utilities menu) to fix it.

Post a picture of the KP screen.

[marceldarvas]

EDIT: seems like everything is working now. shutdown and restart after I created my DSDT. My only problem is, that when I start my computer, I have to use these Bootflags to make it boot: -v -f -F ncpi=x3000. How do I add these to go automatically?

I also think that is a problem, when I boot from USB I have the Chameleon bootloader (displays at top, also the logo is a Chameleon), but when I boot from SSD the logo of the Bootloader is from unishit or tonycrap (you know that red thingy, an apple or something), which I don't know which bootloader is. How do I configure the boot settings of the Chimera bootloader (if it is that)?

[pernacabeluda]

You can set the flags in org.chameleon.Boot.plist using Chameleon Wizard. I don't know about tonycrap stuff.

[marceldarvas]

Thanks! It seems to be working fine for now. Will comment if something goes wrong. Thanks for you help! Can't tell how happy how I am to get my hackintosh running!

[Ramniss]

Hello. I tried googling this problem but I can't find any answer. Clover works but when I select Mountain Lion, it ends up hanging on a black blank screen. I already deleted video kexts and the kextcache something but it still wouldn't work.

[artur-pt]

hello

u have intelhd4000

remove appleintelhd4000 and one apple*capri

and boot

-f -v GraphicsEnabler=No

good hack

[igorescu04]

Hy friends ,

I'm new around here, and my question is this Version Of MAC OX runs well on low level PC/Laptops ?

Like :

1. INtel Celeron E3300, 2 GB RAM, VIDEO ; Intel G33/G31, AUDIO REALTEK HD AUDIO

2. Intel Atom D450, 1 GB RAM

I'LL realy apreciate if anyone can give me a hint.

now i'm downloading the software and i'll burn it to 8GB USB Flasdrive.

I'm really entuziastic with this ..hope will work...

regards

[pernacabeluda]

Hi,

you'll be better with Snow Leopard on those.

Video on 1 is not supported in any OS X version.