ASUS P8Z77-V LK

[xsmile]

If you haven't got windows, create a thumb drive with DOS and do it from there.

I advise you to check the ROMs you download as they can contain the serial number, MAC address and other things of the people who uploaded them. When you flash such a ROM you will lose your own data.

EDIT:

What should theoretically work is you upload your dcpimanager rom which should be able to be modified with PMPatch and you can flash it back.

It will contain your serial numbers which won't be a problem.

[garegin]

Does pmpatch preserve the unique board info?

[xsmile]

It preserves everything. Its just modifies the power management module.

[garegin]

my 8gb flash drive broke. im gonna put w8 on the machine with the 4gb flash drive and flash the rom with that.

[xsmile]

It would perhaps be faster to create a bootable DOS thumb drive and run FTK there.

Never did it myself though from Mac.

[garegin]

which flash command do I use with ftk/ftp. I wanna throw caution to the wind a use windows. the commands are different for flashing different regions.

[xsmile]

"biosrefl" to flash BIOS region, see section 5.2 for a description.

[garegin]

I was impatient and used tkp -f filename noverify.

Everything looks good. Is there a way to verify that the power management patch is effective.

[xsmile]

If you got no patched kext in your Extensions folder, then it works.

Also remove NullCPUPowerMagagement and others you may have installed to patch power management.

If it doesn't work, Mac won't boot and you will see a message saying something about power management.

[garegin]

I didn't install osc yet. I have to get the bigger flash drive.

[garegin]

i'm going nuts here. yesterday i got clover on a flash drive and even though the hfs driver was not there to be selected, it saw the hfs partition. now, it doesn't see it. can you attach me the hfs driver, please?

[garegin]

i downloaded this http://Olarila.com/forum/viewtopic.php?f=27&t=2197

the installer doesn't launch under clover. under chameleon is launches, but i wanna use clover when im done with the install. you think you could DL the same link and then try it on your computer and tell me why it doesn't work on mine. i'm sure its some pesky bootloader setting or a kext.

[xsmile]

You should just install with Chameleon and switch to Clover after you get a running system.

I already told you to test Clover on a thumb drive first so you find out the settings you need.

[garegin]

To make it simpler can I not install the boot loader at all and use chameleon from the USB until I use clover? Ok right now I have two issues. To change the system model to iMac 13,1 and get dsdt working. Can I attach my dsdt so you take a look at it? Chameleon is having the same problem as clover. In non-safe mode the boot freezes just before the GUI. I already installed fakesmc, so according to you I should have a bootable system in non-safe mode, right.

[xsmile]

Theoretically you can but it just makes the whole process more complicated.

Do you see any error messages in verbose mode (-v) ?

Safe mode avoids loading additional extensions but as you installed only the FakeSMC, it must be some Apple extension.

Most probably the freeze is related to the video card. I guess now is the point to make it work.

Don't you have any dedicated video card?

Safe mode is a good start though.

Leave the DSDT aside for now, unless you make any edits that are directly related to the freeze.

Also SMBIOS; you can set it up when you can boot normally.

[garegin]

i get some error about cpu not being supported, but i think that's related to the system model being imac 12,1 not 13,1. the spot is just before the login screen should happen. it's probably related to graphics. can you tell me what could be causing this problem?

[xsmile]

If it's "this is an unknown CPU model ..", you can ignore it. It is not an error.

I can only tell you that it is probably he HD4000. I can't help you with this as I never set it up myself.

Your best chance is to find some tutorial and if you don't succeed, open a new thread with the issue.

[garegin]

it had to do with disabling vt-d. you can do that through the dart=0 boot flag.

https://github.com/tkrotoff/Gigabyte-GA-Z77-DS3H-rev1.1-Hackintosh/issues/1

[xsmile]

Thanks for the info.

Thats interesting. I always had it enabled and it never caused problems.

[garegin]

thats because your CPU doesn't support it.

i propose putting this patch as a boot option in multi beast. i wasted a week of my life on that single issue, hopefully some guy who had the same problem answered.

i want to get the usb 3.0s in the back working with 2.0 backcompat. if i zip you the extracted dsdt. will you patch it for me? pretty please