ASUS P8Z77-V LK

[xsmile]

Also look in /Extra/Extensions as it is used by Chameleon (if you installed it).

HWSensors.pkg contains the FakeSMC.kext. You an extract it from there.

I attached it for you.

FakeSMC.kext.zip

[irex01]

thankyou

[irex01]

i fix permission for it and rebooting

[irex01]

i copy fakesmc.kext to extensions and do permission repair

but during the reboot. message still shows up.

[xsmile]

Boot again with -v -f.

Please verify that it really is in /S/L/E.

[irex01]

yeah. i am looking at it in terminal now

[irex01]

i use ls /volumes/~drive/System/Library/Extensions

and FAKESMC.Kext showed up

[xsmile]

Don't know how to help you now, sorry.

I would recommend you to create a new thread in the installation forum.

[irex01]

oh k, thanks so much. i will create a thread tomorrow then

[xsmile]

Np. One last thought, check if you looked in the correct drive.

Otherwise, don't give up. It must be some basic mistake you did.

[irex01]

hi ,

i successfully got my hackintosh now. BIG thanks to xsmile and Mirone

i still have one issue remaining- AIRPLAY- , can someone helps me to enable my airplay feature on my hackintosh. i using definition 13,1 iMac. and 10.8.2 with i7 3770 and AMD 6850 as main graphic card.

As far as i know. airplay can be enabled within dsdt as well

[artur-pt]

hello

if u use intelhd4000 , like u main card maybe it work...

only know airplay working with intelhd...

good hack

[pernacabeluda]

Yes, looks like Intel HD must be set as primary in BIOS.

http://www.Olarila.com/forum/viewtopic.php?f=27&t=1836

[irex01]

Yes, i already set iGPU as primary. and set memory of iGPU as well

initially. airplay kicked in. but after couple reboot. it's gone. and sometime it back and again. it disappear.

i have no clue what happen to iGPU since i use amd 6850. i still see the iGPU

[irex01]

for some reason, my airplay is working now.

i just gratz

[Mirone]

for some reason, my airplay is working now.

i just gratz

your sleep is working well?

[irex01]

yeah, but now i have usb issue.

just dont get it at all. just dont know if it is cuz of dsdt or it was something else

[esqueegee]

Here's my issue:

ASUS P8Z77-V LK running Intel I5-3470 (2500 Intel Graphics)

With a Geforce GTX 660 card.

Downloaded the new drivers NVIDIA drivers so it's hooked up HDMI to DVI (Monitor)

As of now only boots in safe mode.

Trying to boot normally gives me this screen.

Any advice?

[artur-pt]

hello

try to boot

-f -v

to rebuild the caches...

good hack

[esqueegee]

hello

try to boot

-f -v

to rebuild the caches...

good hack

 

Thanks! It's good only if it works, haha.

Gave -f a try, no luck.

I see builds that have a Intel HD 4000 graphics, but I'd prefer to use the 660 card for startup. Question is what Kext's do I use to make this happen? I just want to it boot without -x safe mode for starters.

[xsmile]

Updated first post.

@esqueegee:

Sadly I got no experience with Nvidia at all.

Which drivers did you install?

One thing I did find though.

Supposedly the FakeSMC's Nvidia plugin causes this crash. You can try to remove it.

[Mirone]

Updated first post.

@esqueegee:

Sadly I got no experience with Nvidia at all.

Which drivers did you install?

One thing I did find though.

Supposedly the FakeSMC's Nvidia plugin causes this crash. You can try to remove it.

try this: http://Olarila.com/forum/viewtopic.php?f=2&t=40

[esqueegee]

Updated first post.

@esqueegee:

Sadly I got no experience with Nvidia at all.

Which drivers did you install?

One thing I did find though.

Supposedly the FakeSMC's Nvidia plugin causes this crash. You can try to remove it.

 

Hey Xsmile!

http://www.nvidia.com/object/macosx-304.00.05f02-driver.html

I removed it by deleting the kext from my extensions folder and gave it a try on reboot, no luck as well. What's the logic behind how Chimera/multishit boots?

Load specific drivers/kexts.

Objects A, B, and C match, initializing bootup with those settings?

People have said they have gotten the Asus motherboard working I have with intel 4000 Graphics. Well I just wanted to skip the part that loads based the 4000 graphics (Because my processor has instead Intel 2500 graphics) with the new NVIDIA card instead. Is this logically sound or is it more complicated than that?

[xsmile]

Hi again,

the 660 is supposed to work without any modifications.

It must be an issue with your configuration.

Check your bootloader settings and remove any video card settings. The video card must be handled natively by OSX now.

I don't know much about multishit, As far as I know it is a compilation of many drivers and setup scripts.

It would be better to configure your system by hand as you will know what changes you made and which changes you don't need to make.

Again, I can't tell much about Chimera, I have used Chameleon and switched to Clover recently.

Nevertheless, Chimera and Chameleon should have the same configuration options. So just try to boot with GraphicsEnabler=No.

The HD4000 should work with some modifications, yes.

Never tried it though. I got an AMD 7870 which works quite well since 10.8.3, except a startup issue.. but it works

PS: Check your BIOS settings for the primary video card. It should be PCIE. Also disable Virtu MVP.

PPS: Is there a normal way to get to the Mac driver section of Nvidia? I must be blind.

EDIT1:

First post updated with premade DSDT.

EDIT2 2013.01.21:

DSDT updated.

[nekitXD]

Hi everyone!

Please give me patched (unlocked .ROM) file from bios firmware...I just update my uefi-bios to 0908 from official site, but i can't to patch my firmware