xsmile Posted January 2, 2013 Author Posted January 2, 2013 Do you boot from USB to install OSX or do you boot an existing installation? If you didn't install yet, I would recommend myHack for creating a bootable thumb drive. 10.9 @ Asus P8Z77-V LK [ALC892, ASM1042, RTL8168], Core i5-3570k, XFX HD 7870
irex01 Posted January 2, 2013 Posted January 2, 2013 i boot from usb that use to install ML. btw, i am try to patch dsdt by following ur dsdt patch, so i just remove the graphic part then use dsdt edit to patch my dsdt? do i need to make any other change in ur dsdt patch, honestly, i never do dsdt b4, kinda confuse to do this
xsmile Posted January 2, 2013 Author Posted January 2, 2013 For the DSDT, yes. First install ML, then do the patching. Don't edit the usb installation. 10.9 @ Asus P8Z77-V LK [ALC892, ASM1042, RTL8168], Core i5-3570k, XFX HD 7870
irex01 Posted January 2, 2013 Posted January 2, 2013 do i need to fill "layout-id" or "boardID" or just patch ur patch on my original dsdt. thanks when i save it from dsdt editor, then open it again it become a blank file. where did i do wrong
xsmile Posted January 2, 2013 Author Posted January 2, 2013 'layout-id' is already set to 92 ('\' in unicode) in the DSDT and in the AppleHDA.kext. They must match, don't change it. 'BoardID' is part of SMBios. Select iMac13,1 in Chameleon Wizard and you get the correct BoardID. Start clean. Boot ML without a DSDT, extract it with the Editor, patch, compile, fix the 2 errors and save to /Extra/DSDT.aml 10.9 @ Asus P8Z77-V LK [ALC892, ASM1042, RTL8168], Core i5-3570k, XFX HD 7870
irex01 Posted January 3, 2013 Posted January 3, 2013 .... really need help to fix this. it doesnt reach to desktop without nullcpu... i dunno what wrong with it, i have been working a week on this and getting no where. so frustration..
xsmile Posted January 3, 2013 Author Posted January 3, 2013 Hm, can you save your BIOS rom with DPCIManager and upload it? Which kexts did you install/modify? Does everything else work with NullCPU ? 10.9 @ Asus P8Z77-V LK [ALC892, ASM1042, RTL8168], Core i5-3570k, XFX HD 7870
irex01 Posted January 3, 2013 Posted January 3, 2013 Hm, can you save your BIOS rom with DPCIManager and upload it? Which kexts did you install/modify? Does everything else work with NullCPU ? yes i can. Do you want me save my current bios or i should flash the stock 0908 then save it. i only install FakeSMC that u mention in 1st post. network and chameleon ( which isnt quite work) because i have to manual hit enter at choosing boot drive screen. then it stucked . wont load further as i post above. but when i install appleACPIplatform and appleintelcpupowermanagement then i can boot to main screen and start doing everything else. im currently reinstall again. thankyou xsmile PS: i guess i will save stock 0908. i will be back
Mirone Posted January 3, 2013 Posted January 3, 2013 yes i can. Do you want me save my current bios or i should flash the stock 0908 then save it. i only install FakeSMC that u mention in 1st post. network and chameleon ( which isnt quite work) because i have to manual hit enter at choosing boot drive screen. then it stucked . wont load further as i post above. but when i install appleACPIplatform and appleintelcpupowermanagement then i can boot to main screen and start doing everything else. im currently reinstall again. thankyou xsmile PS: i guess i will save stock 0908. i will be back try boot -x -f
xsmile Posted January 3, 2013 Author Posted January 3, 2013 Stop reinstalling, you are just wasting time. If everything works beside power management, you made good progress. I need your current rom. Just start DPCIManager and click 'Write ROM to disk'. Chameleon reads its settings from /Extra. There is an extension folder /Extra/Extensions. They are loaded at boot, too. Look if there are no extensions you don't want anymore. 10.9 @ Asus P8Z77-V LK [ALC892, ASM1042, RTL8168], Core i5-3570k, XFX HD 7870
irex01 Posted January 3, 2013 Posted January 3, 2013 sry, i took to long to do it. i was about to do then got called from home. here is the file. thank you http://www.sendspace.com/file/ya1wyf
xsmile Posted January 3, 2013 Author Posted January 3, 2013 Yes, this rom is patched. The problem must be elsewhere. 10.9 @ Asus P8Z77-V LK [ALC892, ASM1042, RTL8168], Core i5-3570k, XFX HD 7870
irex01 Posted January 3, 2013 Posted January 3, 2013 how do i save dsdt from dsdt editor, whenever i save it , it the saved file is blank
Mirone Posted January 3, 2013 Posted January 3, 2013 Yes, this rom is patched. The problem must be elsewhere. what your problem is in the installation?
irex01 Posted January 3, 2013 Posted January 3, 2013 what do u mean. i just install from usb installer.
xsmile Posted January 3, 2013 Author Posted January 3, 2013 @irex01: http://www.insanelymac.com/forum/topic/223205-dsdt-editor-and-patcher/ @Mirone: I just got this problem with already installed ML. 10.9 @ Asus P8Z77-V LK [ALC892, ASM1042, RTL8168], Core i5-3570k, XFX HD 7870
Mirone Posted January 3, 2013 Posted January 3, 2013 @irex01:http://www.insanelymac.com/forum/topic/223205-dsdt-editor-and-patcher/ @Mirone: I just got this problem with already installed ML. what is your graphics card?
xsmile Posted January 3, 2013 Author Posted January 3, 2013 It is an AMD Radeon HD 7870. 10.9 @ Asus P8Z77-V LK [ALC892, ASM1042, RTL8168], Core i5-3570k, XFX HD 7870
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now