ASUS P8Z77-V LK

[irex01]

i use ur newest dsdt but still. problem still present. here is picture of that 2 ports

the two usb3 port next to ethernet still wont work with external HD or USB

i have the same board as xsmile. possible if i could use xsmile's dsdt?

thankyou

[xsmile]

@irex01:

Hi again

These are the ASMedia USB3 ports.

You need drivers for the ASM1042 chipset, check my first post for instructions.

They will work without any DSDT edits, you may get Sleep problems though.

[irex01]

I have sleep working. Iduno way to do now

[Mirone]

i use ur newest dsdt but still. problem still present. here is picture of that 2 ports

the two usb3 port next to ethernet still wont work with external HD or USB

i have the same board as xsmile. possible if i could use xsmile's dsdt?

thankyou

instal 2 kexts.Usb 3.0.zip

[irex01]

after i install those 2 kexts, screen now turn white, how do i remove them now?

[Mirone]

after i install those 2 kexts, screen now turn white, how do i remove them now?

boot -x safed mode

[irex01]

it is didnt work. when i use ati, graphic is white and switch to HD4000, screen is messy. cant do anything

here is screenshoot of -v boot

thanks

[xsmile]

In case you made an installation from a thumb drive, you can use it to access the partition and delete the kexts.

[irex01]

What o you mean. So like I boot from installer USB then go to my hackintosh os to delete Kexts?

[xsmile]

Exactly. This will work.

[irex01]

i cant. the screen is still messy. is there any other way to remove kexts. or i guess i have to have to do clean installation again

thanks

[xsmile]

You may try to enter 'DSDT=' into the Chameleon boot parameter line to boot without a DSDT.

[irex01]

so just DSTD = ? if that is, then i still get the messy screen as b4. is there other option that i could try.

thanks

[irex01]

I guess reinstall is only option

[Mirone]

I guess reinstall is only option

do with boot -s

then type:

mount -uw /

rm -rf /system/library /extensions/CalDigitFastIO.kext

exit

then: mount -uw /

rm -rf /system/library/extensions/CalDigitUSBxHCI.kext

exit

[irex01]

i boot with -s and got to command prompt . however, i cant use keyboard at all. idk whether it froze or keyboard didnt work.

here is screenshoot of it

i guess there is no other option to remove those two kexts. i will do a fresh installation again tomorrow

it is late now so i guess i will sleep .

have a good night everyone.

thank you so much. Mirone, xsmile

Happy New Year

[irex01]

could someone please tell me how to flash rom from dos. i use DPCIManager to flash, the log say VERIFIED ( i guess it successfully flashed) but when i reboot i cant get into main screen . here is the screenshoot of it

so i boot to safemode and install AppleIntelCPUmanagment.kext and AppleACPIPlatform.kext.

thankyou

[Mirone]

could someone please tell me how to flash rom from dos. i use DPCIManager to flash, the log say VERIFIED ( i guess it successfully flashed) but when i reboot i cant get into main screen . here is the screenshoot of it

so i boot to safemode and install AppleIntelCPUmanagment.kext and AppleACPIPlatform.kext.

thankyou

I do not understand your doubts.

[irex01]

Hi mirone

when i flash my board with modified rom, it should remove the requirement of appleIntelCPUmanagment.kext and AppleACPIPlatform.kext. however, even after successfully flash (using DCPIManagment), i still cant get into main screen of Mountain Lion. The verbose shows that it still requires those kexts. is that rite? cuz when i install those 2 kexts, i can boot to mountain lion => DCPIManagement didn't successfully flash the modified rom

so i wonder if you could show me how to flash the mobbed rom in dos. maybe it would succeed

[irex01]

maybe i should not ask it here , im sorry about

so now i have hackintosh runing now. Can you help me with those USB3 at the back panel of cpu again. thankyou so much

@xsmile:

are those 2 usb3 are from intel / ASM1042 USB3? or all 4 of them?