DSDT and Patch Request: Asus X556UA

[Lumikor]

The problems I have with Big Sur 11.5: 

1. ELAN trackpad isn't working, used but I think I need a patch and I don't remember how I did it before. 

2. General performance enhancement if it's possible, I was to get the most out of this computer before I throw it out. 

3a. I can't update clover, getting installation failed error every time. 

3b. is it possible to switch to OpenCore with the same config file and settings?

4. Link to current EFI: https://drive.google.com/file/d/1hiC5cnEDL7w0espPLc5pNZegpgGWxwN6/view?usp=sharing.

5. Hardware spec: i7 7500u, 8Gb Ram 2133Mhz, Intel HD 620, 256Gb SSD

 

Thank You!

 

Edited July 22, 2021 by Lumikor

[MaLd0n]

DSDT.aml.zip

[Lumikor]

@MaLd0n 

touchpad still not working right, attaching new report. 

https://drive.google.com/file/d/1773mt1gLcZWfAtxBLQqfzNfJpN2obwSS/view?usp=sharing

[MaLd0n]

is load

but u need a Interrupt mode

https://github.com/VoodooI2C/VoodooI2C/blob/master/Documentation/Polling Mode.md

[Lumikor]

@MaLd0n 

I haven't understood half of it, is there a way you can help? 

[MaLd0n]

is a personal thing

have many variations from notebooks  

[Lumikor]

@MaLd0n 

I found the section they talk about in the guide, but it's already have Return (ConcatenateResTemplate (SBFB, SBFI)) Am I looking at the wrong place? should I delete this section (for my understanding it should be the way it is)

thanks again. (picture attached)

https://drive.google.com/file/d/1AdPx8Qmd_1Oxy9Y47lnrZhzQ8fLsyFz3/view?usp=sharing

 

 

Edited July 24, 2021 by Lumikor

[MaLd0n]

Quote

DefinitionBlock ("", "SSDT", 2, "hack", "elan", 0x00000000)
{
    External (_SB_.PCI0.GPI0, DeviceObj)
    External (_SB_.PCI0.I2C1.ETPD, DeviceObj)

    Method (_SB.PCI0.GPI0._STA, 0, NotSerialized)  // _STA: Status
    {
        Return (0x0F)
    }

    Scope (_SB.PCI0.I2C1.ETPD)
    {
        Name (SBFG, ResourceTemplate ()
        {
            GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000,
                "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer, ,
                )
                {   // Pin list
                    0x0055
                }
        })
        Method (_CRS, 0, Serialized)  // _CRS: Current Resource Settings
        {
            Name (SBFB, ResourceTemplate ()
            {
                I2cSerialBusV2 (0x0015, ControllerInitiated, 0x00061A80,
                    AddressingMode7Bit, "\\_SB.PCI0.I2C1",
                    0x00, ResourceConsumer, , Exclusive,
                    )
            })
            Return (ConcatenateResTemplate (SBFB, SBFG))
        }
    }
}
 

 

[Lumikor]

@MaLd0n

I'm getting a lot of errors trying to save the file, using MaciASL to edit it.

[MaLd0n]

create one ssdt for test

[Lumikor]

@MaLd0n

Created in SSDT-I2C.aml with no errors, but still not working right

https://drive.google.com/file/d/1PA4Gf_XfozPuSnUZ8NQfWtwLHF_ou6gD/view?usp=sharing