HD4000 IvyBridge

[Rutherford]

Any solution for HD4000 graphics (IvyBridge) with graphics acelaration yet? Thanks

[MaLd0n]

hey

what system version?

[Rutherford]

Yes Sorry. I was trying to install your Monterey image on my Asus IvyBridge HD4000. The graphics acceleration don't seem to work. Minutes later I get a panic with some WatchDog message, even tough I started with -wegnoegpu keepsyms=1 debug=0x100 alcid=4 -v shikigva=128 watchdog=0 -no_compat_check agdpmod=pikera -lilubetaall. I am using MacBookPro13,3 as Platf.Config, which used to work very well under BigSur and OpenCore 7.1.

Thanks for your help.

Edited June 25, 2021 by Rutherford

[MaLd0n]

i think ur hardware die for monterey

[ebaymic]

On 6/25/2021 at 10:28 PM, Rutherford said:

Yes Sorry. I was trying to install your Monterey image on my Asus IvyBridge HD4000. The graphics acceleration don't seem to work. Minutes later I get a panic with some WatchDog message, even tough I started with -wegnoegpu keepsyms=1 debug=0x100 alcid=4 -v shikigva=128 watchdog=0 -no_compat_check agdpmod=pikera -lilubetaall. I am using MacBookPro13,3 as Platf.Config, which used to work very well under BigSur and OpenCore 7.1.

Thanks for your help.

I have Monterey Beta 2 with graphics acceleration working on my Gigabyte B75M-D3H i5 3570K Ivy Bridge Motherboard.  Used OpenCore Legacy Patcher by Dortania. Use option 3 Post-install Volume Patch.  Ensure your Mac is set for auto-login. Had to set Smbios to MacBook Pro 8.2 to work.  Opencore 7.1 with updated kexts. 

boot-arg  -v keepsyms=1 -lilubetaall amfi_get_out_of_my_way=1 -no_compat_check

Edited July 8, 2021 by ebaymic

[Rutherford]

Hey, thank you very much. I'll see what happens in my case.

 

[Rutherford]

Could not run LegacyPatcher yet because my Monterey system does not start (panic). Which SBIOs settings do you use? Thanks.

[ebaymic]

On 7/24/2021 at 7:01 PM, Rutherford said:

Could not run LegacyPatcher yet because my Monterey system does not start (panic). Which SBIOs settings do you use? Thanks.

Set Smbios to MacBook Pro 8.2.  I tried to upgrade to Monterey Beta 3 without success (Kernel Panic).  Not sure what has happened but OC legacy patcher not working. 

Give Chris1111 HD4000 patcher a go https://github.com/chris1111/Patch-HD4000-Monterey . It might work. I'm going to wait a while before I try again with a later update of Monterey.

[Rutherford]

Still trying but no success yet. I will post here my experience.?

[Rutherford]

Boots for me now and runs w/o acceleration. Unfortunately (latest) LegacyPatcher or PatchHD4000 force the laptop to start over an over again. Any suggestions?

Edited August 6, 2021 by Rutherford

[ebaymic]

That's the same problem I had.  Monterey runs without acceleration very sluggishly.   When use either legacy or PatchHD4000 the PC stops at a command  line or kernel panic.

 

According to Chris1111 it is critical to disable SIP to install his patch. 

In OC config.plist  - 

• csr-active-config ☞ EF0F0000

and in a terminal in Recovery mode 

csrutil disable

csrutil authenticated-root disable

Latest PatchHD4000 has a built in SIP checker.

Set boot-args   

• -v keepsyms=1 -lilubetaall amfi_get_out_of_my_way=1 -no_compat_check

Gate keeper must be disabled

sudo spctl --master-disable

Smbios set    MacBookPro12,1

 

With laptops I had some kexts that caused kernel panic on start.  All kexts and drivers and opencore need to be updated to latest versions.

Hope that helps.

 

 

[Alejandro Barreiro]

On 6/24/2021 at 4:39 AM, Rutherford said:

Any solution for HD4000 graphics (IvyBridge) with graphics acelaration yet? Thanks

For which version of MacOS?

[Rutherford]

Hi ebaymic,

simply amazing! I just needed to use another SMBIOS matching my Quad-Core Intel Core i7 and did not use -lilubetaall amfi_get_out_of_my_way=1. All other things I took from your post. Thank you very much!

@Alejandro Barreiro: Monterey

[ebaymic]

Great news Rutherford.

What Smbios did you use  and did you use  Chris1111's PatchHD4000 or OpenCore Legacy Patcher ? Also what Beta version of Monterey?

[Rutherford]

I used MacBookPro13,3, since this is the most similar to my own laptop CPU. The boot args.: -wegnoegpu alcid=4 watchdog=0 -no_compat_check agdpmod=pikera -keepsyms=1. PatchHD4000.EN from https://github.com/chris1111/Patch-HD4000-Monterey/releases as you know. My beta version is the latest available by Olarila, this is: 12.0 Beta (21A5304g). I believe this is Beta5. But I think the real important thing was to boot in recovery mode and do csrutil disable...

Thanks again

[ebaymic]

I have installed Monterey Beta 5 on my Gigabyte B75M-D3H i5 3570K Ivy Bridge HD4000  Motherboard. 

Graphics acceleration is good.  Used  https://github.com/chris1111/Patch-HD4000-Monterey/releases.  My Smbios set to iMac 17.1 (quad-core i5) not the recommended  MacBookPro12,1 .  

All good now. Not sure how easy it will be updating to next beta.  I might wait for the final release.

Thanks for your help Rutherford.

[Rutherford]

?. We'll keep in touch!

[ebaymic]

On 8/30/2021 at 7:07 PM, Rutherford said:

?. We'll keep in touch!

I have just update from Monterey Beta 5 to  Beta 6.  Needed to reinstall PatchHD4000 and reboot. Graphic acceleration good.

[Rutherford]

Same here?.

[Rutherford]

Hi. I just updated to 12.0 Beta 8 (21A5534d). Only thing I modified is I changed Advisefeatures to yes (Platinfo -> Generic). Not sure if only optional for other users. Just check.

Edited October 7, 2021 by Rutherford